Abstract:In this work, various calorimetric and analytical techniques were implemented to identify reaction pathways and safety issues associated with the 2-octanol to 2-octanone two liquid phase catalytic reaction oxidative using aqueous hydrogen peroxide as oxidant, sodium tungstate (Na2WO4) as catalyst and methyltri-n-octylammonium hydrogen sulfate [CH3(n-C8H17)(3)N+HSO4-] as phase transfer catalyst. Differential scanning calorimetry (DSC) was employed to measure the temperature and heat flux of the reactant mixtures under dynamic scanning. Phi-TEC II adiabatic calorimeter was used to track temperature and pressure under worst runaway scenario. Isothermal reaction calorimeter (RC1e) was used to assess conditions relevant to normal process operations. Gas chromatography-mass spectrometry (GC-MS) was utilized to analyze final products of all measurements qualitatively and quantitatively. Data from both DSC and Phi-TEC II show that two highly exothermic reactions were detected with "onset" temperature at similar to 50 and similar to 220 degrees C, respectively. In all cases, only 2-octanol and 2-octanone were the identifiable compounds via GC-MS. 2-Octanol conversion was in the range of 15-50% and it reveals a linear correlation with overall heat generation. Data obtained verify that both exothermic peaks result from alcohol oxidation, thus indicating that in the conditions of the reaction and with the employed catalysts, hydrogen peroxide did not fully decompose at lower temperatures. Non-condensable gas generation measurements validated this argument. Based on those results, possible macroscopic reaction pathway was proposed. Furthermore, pressure and temperature profiles by PHI-TEC II indicated a potential transition to a homogeneous liquid phase at higher temperatures. The RC1e results verified that 2-octanol conversion was higher at higher stirring rates, while evaporative cooling of solvents tempered the reaction by removing the heat generated, thus improving safety. These findings can be further used to propose safer operating measures for design and scale-up of this reaction process to avert a potential runaway and to probe in the reaction pathways so as to increase inherently safer conditions for its performance.

Inherent safer design for chemical process of 1,4-dioldiacetate-2-butene oxidized by ozone

Inherently safer design for synthesis of 3‐methylpyridine‐N‐oxide

Investigating the Inherent Safety Designs of Typical Exothermic Reaction Processes

Inherently safer design and multi-objective optimization of extractive distillation process via computer-aided molecular design, thermal stability analysis, and multi-objective genetic algorithm

Progress on Inherently Safer Design Methods in Chemical Process

Process Hazard Evaluation for Catalytic Oxidation of 2-Octanol with Hydrogen Peroxide Using Calorimetry Techniques

Methodology for Inherent Safer Design of Chemical Process During Early Process of Design

Thermal Risk Assessment of the Complex Nitration Process Through Safety Operating Space Analysis and Optimization

Process Safety Evaluation and Reaction Mechanism of Two Step Synthesis of Tert-Butyl Hydrogen Peroxide

Investigating Semibatch Oxidation Reaction of Dimethyl Sulfoxide with Hydrogen Peroxide: Thermal Analysis and Process Optimization

Thermal Hazard Assessment and Ranking for Organic Peroxides Using Quantitative Structure–property Relationship Approaches

Thermal Hazard of Multiple Liquid-Liquid Heterogeneous Reaction:Nitric Acid Oxidation of Sec-Octanol

Investigation of thermal risk assessment and hazard rankings for three organic peroxides: DTBP, CHP, and DCPO

Investigative calorimetric studies and kinetic parameters estimation using analytical methods for self-reactive hazardous chemicals in a chemical manufacturing plant

Process Hazard Evaluation and Thermal Runaway Prediction for Styrene Polymerization Initiated by Peroxide-Azo Composites

Reaction hazard and mechanism study of H2O2 oxidation of 2-butanol to methyl ethyl ketone using DSC, Phi-TEC II and GC-MS

Investigation of the thermal hazard and decomposition mechanism of 1,1-di(tert-butylperoxy) cyclohexane by experiment and DFT simulation

New Thermal Runaway Risk Assessment Methods for Two Step Synthesis Reactions

An Integrated Quantitative Index Of Stable Steady State Points In Chemical Process Design

Essential hazard and process safety assessment of para-toluene sulfonic acid through calorimetry and advanced thermokinetics

The organic peroxides instability rating research based on adiabatic calorimetric approaches and fuzzy analytic hierarchy process for inherent safety evaluation