Abstract:In this work, various calorimetric and analytical techniques were implemented to identify reaction pathways and safety issues associated with the 2-octanol to 2-octanone two liquid phase catalytic reaction oxidative using aqueous hydrogen peroxide as oxidant, sodium tungstate (Na2WO4) as catalyst and methyltri-n-octylammonium hydrogen sulfate [CH3(n-C8H17)(3)N+HSO4-] as phase transfer catalyst. Differential scanning calorimetry (DSC) was employed to measure the temperature and heat flux of the reactant mixtures under dynamic scanning. Phi-TEC II adiabatic calorimeter was used to track temperature and pressure under worst runaway scenario. Isothermal reaction calorimeter (RC1e) was used to assess conditions relevant to normal process operations. Gas chromatography-mass spectrometry (GC-MS) was utilized to analyze final products of all measurements qualitatively and quantitatively. Data from both DSC and Phi-TEC II show that two highly exothermic reactions were detected with "onset" temperature at similar to 50 and similar to 220 degrees C, respectively. In all cases, only 2-octanol and 2-octanone were the identifiable compounds via GC-MS. 2-Octanol conversion was in the range of 15-50% and it reveals a linear correlation with overall heat generation. Data obtained verify that both exothermic peaks result from alcohol oxidation, thus indicating that in the conditions of the reaction and with the employed catalysts, hydrogen peroxide did not fully decompose at lower temperatures. Non-condensable gas generation measurements validated this argument. Based on those results, possible macroscopic reaction pathway was proposed. Furthermore, pressure and temperature profiles by PHI-TEC II indicated a potential transition to a homogeneous liquid phase at higher temperatures. The RC1e results verified that 2-octanol conversion was higher at higher stirring rates, while evaporative cooling of solvents tempered the reaction by removing the heat generated, thus improving safety. These findings can be further used to propose safer operating measures for design and scale-up of this reaction process to avert a potential runaway and to probe in the reaction pathways so as to increase inherently safer conditions for its performance.

Reaction hazard and mechanism study of H2O2 oxidation of 2-butanol to methyl ethyl ketone using DSC, Phi-TEC II and GC-MS

Study on Macro-kinetics of Preparation of Tethyl Isobutyl Ketone Via Dehydrogenation of Methyl Isobutyl Carbinol

Process Hazard Evaluation for Catalytic Oxidation of 2-Octanol with Hydrogen Peroxide Using Calorimetry Techniques

Catalytic Dehydration of 2,3-Butanediol over P/Hzsm-5: Effect of Catalyst, Reaction Temperature and Reactant Configuration on Rearrangement Products

Evaluation of adiabatic runaway reaction of methyl ethyl ketone peroxide by DSC and VSP2

Process Safety Evaluation and Reaction Mechanism of Two Step Synthesis of Tert-Butyl Hydrogen Peroxide

Computational Studies on the Thermodynamic and Kinetic Parameters of Oxidation of 2-Methoxyethanol Biofuel via H-Atom Abstraction by Methyl Radical

Study on thermal stability and thermal decomposition mechanism of 1,1-di-tert-butyl peroxy-3,3,5-trimethyl cyclohexane through adiabatic calorimeter and theoretical approach

Oxidative Dehydrogenation of Ethane to Ethylene over Potassium Tungstate Catalysts

Process Hazard Assessment and Exothermic Mechanism of Propylene Glycol Butyl Ether Synthesis from Propylene Oxide

Calorimetric studies on the thermal hazard of methyl ethyl ketone peroxide with incompatible substances

Runaway reaction and thermal hazards simulation of cumene hydroperoxide by DSC

Thermochemical and Kinetic Analyses on Oxidation of Isobutenyl Radical and 2-Hydroperoxymethyl-2-propenyl Radical.

Calorimetric and Kinetic Evaluation of Thermal Stability and Process Safety in Tert-Butyl Peroxy-2-ethylhexanoate and Tert-Butyl Peroxybenzoate

Investigation of the thermal hazard and decomposition mechanism of 1,1-di(tert-butylperoxy) cyclohexane by experiment and DFT simulation

A theoretical study of β-hydroxybutenyl with O2 on the HOC4H6OO· potential energy surface

A green approach towards adoption of chemical reaction model on 2,5-dimethyl-2,5-di-(tert-butylperoxy)hexane decomposition by differential isoconversional kinetic analysis

Thermal Hazard Evaluation of Tert-Butylperoxy-2-ethylhexanoate Mixed with H2O and NaOH Solution

Thermal runaway behavior and hazard evaluation of cumene hydroperoxide mixed separately with four products under adiabatic conditions coupled with risk matrix method

Theoretical Kinetic Studies for Low Temperature Oxidation of Two Typical Methylcyclohexyl Radicals

Multiscale Modeling and Simulation on Oxidative Dehydrogenation of Ethane to Ethylene