Abstract:Given the focus of green hydrogen economy for a sustainable future, it is crucial to understand the degradation features of proton exchange membrane water electrolysis (PEMWE). However, despite numerous studies that aim to uncover these features under various loads such as pulse shape cycling and steady-state, which are commonly employed to simulate the intermittent characteristics of renewable energy source (RES) power, there is a notable lack of reported experiments that accurately replicate the complex loads observed in realistic RES scenarios. In this study, a high-resolution, realistic solar profile was first simulated to examine the degradation features compared to a set of typical stability tests, including steady-state and dynamic cycling loads. Our simulation method is distinct in that it directly utilizes the P-V and I-V characteristics of the solar array at different irradiation levels. Notably, our simulated solar profile had an exceptionally high resolution of 1 second, and the shortest step duration among the studied profiles, which allowed to maximize the effect of high-ramp rate events in RES power. Additionally, the resulting degradation features were systematically and comprehensively scrutinized through a comprehensive analysis, including electrochemical, spectroscopic, and microscopic characterizations, along with a close structure examination of the catalyst/membrane interface, membrane degradation, and Ti porous transport layer passivation. High resolution realistic solar profile is featured by the activation overpotential recovery during rest "night time" periods, elevated fluoride release rate due to cycling to low loads (49.17 μg h −1 cm −2 ), insignificant Ti passivation (0.41 nm) and Pt dissolution/diffusion to the anode (0.69 at% of Ir and 0.17 at% of Pt were found in the membrane adjacent to the anode catalyst layer). These findings can provide valuable guidelines for establishing a suitable RES-mimicking accelerated stress test protocol to diagnose system durability, and for designing durable materials for long-term operation. More importantly, the insight gained can bridge the gap between laboratory-scale investigations and on-site RES-coupled PEMWE operations, addressing current limitations in fundamental understanding of degradation mechanisms.

Study of the Durability of Membrane Electrode Assemblies in Various Accelerated Stress Tests for Proton-Exchange Membrane Water Electrolysis

A Review of Accelerated Stress Tests for Enhancing MEA Durability in PEM Water Electrolysis Cells

Investigating the acceleration factors of proton exchange membrane fuel cell degradation

Effect of low voltage limit on degradation mechanism during high‐frequency dynamic load in proton exchange membrane water electrolysis

Durable Membrane Electrode Assemblies for Proton Exchange Membrane Electrolyzer Systems Operating at High Current Densities

Proton exchange membrane fuel cell degradation under close to open-circuit conditions

Comparative Study of Degradation Features in Proton Exchange Membrane Water Electrolysis: Irregular Renewable Energy Vs Regular Steady-State/Dynamic Loads

Degradation Differences of a Single Proton Exchange Membrane Fuel Cell: Energy Management Strategy and Dynamic Programming

Experimental investigation of degradation mechanism in proton exchange membrane water electrolyzer under prolonged and severe bubble accumulation condition

Systematic Degradation Analysis in Renewable Energy-Powered Proton Exchange Membrane Water Electrolysis

Degradation Characteristics of Membrane Electrode Assembly under Drive Cycle Test Protocol

Degradation Study of Membrane Electrode Assembly with PTFE/Nafion Composite Membrane Utilizing Accelerated Stress Technique

A Review of Accelerated Stress Tests of Mea Durability in Pem Fuel Cells

A Review of the Transition Region of Membrane Electrode Assembly of Proton Exchange Membrane Fuel Cells: Design, Degradation, and Mitigation

Performance Degradation of Proton Exchange Membrane Fuel Cell Caused by an Accelerated Stress Test

Diagnosis of Membrane Electrode Assembly Degradation with Drive Cycle Test Technique

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

Investigation of mechanical degradation in catalyst-coated reinforced membranes under in-situ hydrothermal cycles

Physical Degradation of Anode Catalyst Layer in Proton Exchange Membrane Water Electrolysis

Degradation Analysis of the Core Components of Metal Plate Proton Exchange Membrane Fuel Cell Stack under Dynamic Load Cycles

Electrical-thermal-electrochemical Insights of the PEMWE Stack in the Accelerated Stress Test Protocol Powered by Renewable Energy