Abstract:Next-generation wireless standards (e.g., WiFi-7) advancing towards wider bandwidth and higher order modulation require ADCs with GHz sampling rates and over 12b resolution. Although conventional pipelined ADCs can satisfy the speed and resolution specifications, their power is usually too high for handset applications, for which $\leq 10\text{mW}$ per channel is desired. Alternatively, time-interleaved (TI) ADCs achieve low power by harnessing efficient low-speed SAR sub-ADCs. However, background timing-skew calibrations bring considerable overhead and place limitations on the input signal. The pipeline/TI-SAR hybrid architecture places the interleaved SAR at the $2^{\text{nd}}$ pipeline stage to avoid the timing skew problem [1]. As the SAR consumes low power and can run asynchronously, this greatly reduces the pipeline backend power and simplifies the clock distribution. However, the residue amplifier is still a power efficiency bottleneck as in a conventional pipeline. In [1], the architecture advantages are shaded by its power-hungry telescopic OTA. This work proposes a ring amplifier with split MDAC to boost the efficiency of the pipelined TI-SAR architecture, which enables a 1GS/s 10-ENOB ADC which consumes only 6.9mW. For high-speed ADCs, the power and area overhead of the reference buffer is also a critical issue. This work proposes a reference decoupling capacitor (de-cap) switching technique that reduces the reference buffer power to only 3.7mW, and the total de-cap size to only 44pF, while maintaining excellent high-frequency performance. Overall, this work achieves $\text{FoM}_{\mathrm{s}}$ of 171.1 and 169.2dB with or without the reference buffer, which outperforms all reported works with $\mathrm{f}_{\mathrm{s}} > 600\text{MS}/\mathrm{s}$ .

9.3 A 71dB SNDR 200MHz BW Interleaved Pipe-SAR ADC with a Shared Residue Integrating Amplifier Achieving 173dB FoMs.

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

9.1 A 2mW 70.7dB SNDR 200MS/s Pipelined-SAR ADC with Continuous-Time SAR-Assisted Detect-and-Skip and Open-then-Close Correlated Level Shifting.

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

9.4 A 182.3dB FoM<inf>s</inf> 50MS/s Pipelined-SAR ADC using Cascode Capacitively Degenerated Dynamic Amplifier and MSB Pre-Conversion Technique

A 2-Mw 70.7-Db SNDR 200-Ms/s Pipelined-SAR ADC Using Continuous-Time SAR-Assisted Detect-and-Skip and Open-Then-Close Correlated Level Shifting

A 1.5-MHz BW 81.2-dB SNDR Dual-Residue Pipeline ADC With a Fully Dynamic Noise-Shaping Interpolating-SAR ADC

A 14b 500 MS/s Single-Channel Pipelined-SAR ADC With Reference Ripple Mitigation Techniques and Adaptively Biased Floating Inverter Amplifier

An 871nw 96.2Db-Sndr Pipelined NS SAR ADC Achieving 180.8Db-Fomsndr with a Charge-Efficient CLS-Assisted Two-Stage FIA

A 71.5-Db SNDR 475-Ms/s Ringamp-Based Pipelined SAR ADC with On-Chip Bit-Weight Calibration

A 12-Bit 1.5-Gs/s Single-Channel Pipelined SAR ADC with a Pipelined Residue Amplification Stage

A 10b 1.25GS/s Residue Post-Amplified Pipelined-SAR ADC with Supply-and-Temperature Stabilized Open-Loop Residue Amplifier.

An 871 Nw 96.2 Db SNDR Pipelined Second-Order Noise-Shaping SAR ADC Employing Charge-Efficient CLS-Assisted Residue Amplifier

28.1 A 0.46mW 5MHz-BW 79.7dB-SNDR noise-shaping SAR ADC with dynamic-amplifier-based FIR-IIR filter

A 68.5 Db-Sndr, 12.4-Fj/conv.-step, 100-Ms/s Pipelined-Sar ADC with PVT-enhanced Circuitry

A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor.

17.5 A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor

A 625ms/s, 12-Bit, SAR Assisted Pipeline ADC with Effective Gain Analysis for Inter-stage Ringamps

A 91.0-Db SFDR Single-Coarse Dual-Fine Pipelined-SAR ADC with Split-Based Background Calibration in 28-Nm CMOS.