Abstract:At high current density, low capacity and rapid capacity decay of spinel LiMn2O4 cathode material during the cycle limit its application. Herein, element doping approach to restrain Jahn-teller effect combined with crystal plane regulation to mitigate Mn dissolution is employed to synthesize a series of truncated octahedron LiNi0.02FexMn1.98-xO4 (x <= 0.12) which provide high exposure {111} surfaces as well as a small portion of {110} and {100} facets for offering Li+ ion rapid diffusion channel. Many characterizations such as XRD, SEM and TEM show that Ni-Fe co-doped can effectively promote the development of crystal and the preferential growth of crystals planes. Electrochemical test results imply that at 1 C the difference between capacity and capacity retention ratio in terms of LiNi0.02Mn1.98O4 (LNMO) and Ni-Fe co-doping samples are not obvious. With the increasing of current densities, Ni-Fe co-doping samples exceptional rate capability and cycle stability become apparent. The optimal LiNi0.02Fe0.05Mn1.93O4 (LNFMO-5) and LNMO can keep 76.9% and 74.6% of their original capacity of 113.4 mAh.g(-1) as well as 116.2 mAh.g(-1 )after 500 cycles at 1 C, respectively. At 10 C, the LNFMO-5 sample delivers the capacity of 89.3 mAh.g(-1) and a higher capacity retention ratio of 72.9% after 2000 cycles, while the LNMO sample is only 63 mAh.g(-1) and 67.2%. Even at 20 C, The LNFMO-5 sample still reaches a high specific capacity of 84.9 mAh.g(-1) and a higher capacity retention ratio of 76.1% after 2000 cycles, which are much higher than the LNMO sample (63.0 mAh.g(-1)) and 57.4% capacity retention rate. CV and EIS analysis manifest that the LNFMO-5 has a higher D-Li(+) and a lower E-a than that of the LNMO. A unique Ni-Fe co-doped truncated octahedral LiMn2O4 material with exceptional electrochemical property will be an attractive candidate for the preparation high-performance and long-cycle spinel LiMn2O4 cathode materials.

Regulation of Morphology and Particle Size of Spinel LiMn2O4 Induced by Fe-B Co-Doping for High-Power Lithium Ion Batteries

Regulation of morphology evolution and Mn dissolution for ultra-long cycled spinel LiMn<sub>2</sub>O<sub>4</sub> cathode materials by B-doping

Improved long cycle performance of LiMn<sub>2</sub>O<sub>4</sub> cathode material by Ni-B co-doping combined with truncated octahedron morphology

Boosting High-Rate Capacity and Long-Cycle Stability of Spinel LiMn2O4 by the Cr-Al Co-Doping Strategy

Effects of crystal structure and plane orientation on lithium and nickel co-doped spinel lithium manganese oxide for long cycle life lithium-ion batteries.

From the Crystal Inside to the Surface: A Completely Activated Spinel LiMn 2O 4 Cathode Material with a High Rate and Long-Life Behavior

Enhanced High-Rate and Long-Cycle Performance of Mg2+-Al3+ Co-Doped Spinel LiMn2O4 Cathode Materials for Li-ion Batteries

Preparation and Long Cycle Electrochemical Properties of B-Doped Spinel LiMn<sub>2</sub>O<sub>4</sub> Cathode Material

Effects of Cr3+ Doping on Spinel LiMn2O4 Morphology and Electrochemical Performance

Preparation of Long Cycle Lifespan Spinel LiMn2O4 Cathode Material by a Dual-Modified Strategy

Stimulative formation of truncated octahedral LiMn2O4 by Cr and Al co-doping for use in durable cycling Li-ion batteries

Enhancing High-Rate and Elevated-Temperature Properties of Ni-Mg Co-Doped LiMn2O4 Cathodes for Li-ion Batteries

Enhanced Li+ Ion Transport in LiNi0.5Mn1.5O4 Through Control of Site Disorder.

Strengthening Reversibility at High Rate of Spinel LiMn2O4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Preparation and electrochemical properties of Al‐F co‐doped spinel LiMn 2 O 4 single‐crystal material for lithium‐ion battery

Improved Capacity Retention and Ultralong Cycle Performance of Ni-Fe Co-Doped LiMn2O4 Cathode Material at High Current Densities

Mg2+ and Ti4+ Co-Doped Spinel LiMn2O4 as Lithium-Ion Battery Cathode

Strengthening Reversibility at High Rate of Spinel LiMn 2 O 4 by Aluminum and Copper Co-doping for Lithium Ion Battery

General Synthesis of Single‐Crystal Spinel Cathodes with the Tailored Orientation of Exposed Crystal Planes for Advanced Lithium‐Ion Batteries

Structure Evolution from Layered to Spinel during Synthetic Control and Cycling Process of Fe-Containing Li-Rich Cathode Materials for Lithium-Ion Batteries

Optimized Morphology and Tuning the Mn3+ Content of LiNi0.5Mn1.5O4 Cathode Material for Li-Ion Batteries