Abstract:The state-of-the-art solar-thermal evaporators demonstrating high energy utilization efficiency, a high evaporation rate, and salt rejection are highly desirable in solar-driven low-energy water purification/harvesting. Herein, a novel Janus solar evaporator is constructed by loading polypyrrole (PPy) nanobelts on the polyvinyl alcohol (PVA) hydrogel. The PPy nanobelts present a high solar absorption of 98.3%, leading to a localized solar-thermal efficiency of 82.5% when insulated from bulk water by the PVA hydrogel. The porous PVA hydrogel and the hydrophilic PPy nanobelts enable the efficient three-dimensional water transport. Taking advantages of the synergistic effect in the water-energy nexus, the Janus PPy hydrogel evaporator evaporates water with a high rate of 2.26 kg m–2 h–1 via 80.1% solar energy from 1 sun irradiance with a low PPy loading of ∼3 mg cm–2 even at a rate of 2.64 kg m–2 h–1 via 96.3% solar energy for a biomimetic conical evaporator. The Janus evaporator presents superior salt-resistant desalination and contaminant purification performance in seawater and sewage. Furthermore, a portable solar-thermal purifier equipped with the Janus evaporator desalts real seawater far above the drinking water standard with over a 99.9% salt rejection rate and eliminates 95.8% of chemical oxygen demand in real sewage, highlighting its potential for advanced clean water harvesting.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13584.Instruments and characterization; desalination and purification tests; instruments; calculations of total solar absorption of PPy nanobelts; calculations of vaporization enthalpy and energy efficiency; digital images of the bulk FeOCl crystal and superfine FeOCl powder; digital images of PPy dispersions in DMSO; XRD pattern of PPy nanobelts; FTIR spectra of PPy nanobelts, PVA and the PPy-PVA compound; temperature curve of the PPy nanobelts under 1 sun irradiation over time; calculations of solar-thermal conversion efficiency; mechanical strength of the PVA hydrogel; π–π interactions of PPy nanobelts; water contact angle of the PPy nanobelt film; UV–vis–NIR reflectance spectra of the upper surface of both flat and conical evaporators; evaporation rate of the conical Janus-type PPy hydrogel evaporator under 1, 2, and 5 sun irradiation; mass loss of simulated average seawater for the conical Janus evaporator with a PPy nanobelt loading content of 3 mg cm–2 compared with the bare pure water as the blank control experiment under 1 sun; corresponding fitted calibration curve of UV–vis absorbance versus gentian violet concentration at 588 nm; water transport rate of the PVA hydrogel; and calculations of COD (PDF)Washing test (MP4)This article has not yet been cited by other publications.

A Feasibility Study of Hybrid Forward Osmosis-Solar Evaporation Process Using Melamine Sponge Loaded with Polypyrrole (ppy@ms) Solar Evaporator for Desalination of Brackish Water

A Bifunctional MoS2-based Solar Evaporator for Both Efficient Water Evaporation and Clean Freshwater Collection

Highly salt-resistant 3D melamine sponge-polypyrrole composites for efficient solar interfacial evaporation

A Salt-Rejecting Solar Evaporator for Continuous Steam Generation

Polyoxometalates‐Modulated Hydrophilic‐Hydrophobic Composite Interfacial Material for Efficient Solar Water Evaporation and Salt Harvesting in High‐Salinity Brine

Highly Efficient and Cost-Effective Water Desalination via the Hybrid Hydrogel-Based Solar-Driven Interfacial Evaporation

Highly Salt-Resistant interfacial solar evaporators based on Melamine@Silicone nanoparticles for stable Long-Term desalination and water harvesting

Salt-resistance holocellulose-based solar steam evaporator for desalination brine water

An integrated solar evaporator with multilevel hierarchy and multifunctional properties for efficient and salt fouling-resistant desalination

A Scalable Prototype by in Situ Polymerization of Biodegradables, Cross-Linked Molecular Mode of Vapor Transport, and Metal Ion Rejection for Solar-Driven Seawater Desalination

Polyethersulfone-silica aerogel/ polypyrrole solar evaporation membrane for wastewater treatment and desalination

Double-layered solar evaporator based on polymeric ionic liquid grafted attapulgite and MXene/PPy for efficient desalination and photodegradation

MXene/polypyrrole coated melamine-foam for efficient interfacial evaporation and photodegradation

Simultaneous Solar-Driven Interfacial Evaporation and Phenol Degradation Using Three-Dimensional MoS2-melamine Foam

Fe3O4/PPy-Coated Superhydrophilic Polymer Porous Foam: A Double Layered Photothermal Material with a Synergistic Light-to-Thermal Conversion Effect Toward Desalination.

Super Hydrophilic 3D Porous PDA@ Carbonized Sponge for High Evaporation of Seawater Desalination

Fe 3 O 4 /PPy-Coated Superhydrophilic Polymer Porous Foam: A Double Layered Photothermal Material with a Synergistic Light-to-Thermal Conversion Effect toward Desalination

Ag/polypyrrole Co-Modified Poly(ionic Liquid)s Hydrogels As Efficient Solar Generators for Desalination

Coupling solar-driven interfacial evaporation with forward osmosis for continuous water treatment

High-efficiency Electrospun PVDF@MXene Composite Membrane with Covalent Bonding and Well-Dispersed Internal Materials for Solar-Driven Seawater Desalination

Janus Polypyrrole Nanobelt@Polyvinyl Alcohol Hydrogel Evaporator for Robust Solar-Thermal Seawater Desalination and Sewage Purification