Abstract:This study aims to improve the performance of magnesium phosphate cement-based engineered cementitious composites (MPC-ECC) and establish a systematic design method. The MPC-ECC with ultra-high ductility was prepared with the polyethylene (PE) fibers. The effect of the magnesium oxide to potassium dihydrogen phosphate mass ratio (M/P), quartz sand particle size (Sd), water to solid mass ratio (W/S), sand to binder mass ratio (S/B), fly ash (FA) content and fiber volume fraction (Vf) on the micro-mechanical properties and macro-mechanical properties of MPC-ECC were explored. The macro-mechanical properties of MPC-ECC with different curing temperatures and curing ages were also tested. And the SEM test was carried out to analyze the morphology of the MPC-ECC. The results showed that the ultimate tensile strain of MPC-ECC with optimal proportion can reach 7.1%. Even curing at −10 °C for 7 days, the ultimate tensile strain can reach 5.6%, and the compressive strength can reach nearly 20 MPa. And the microstructure is characterized by a highly dense morphology. Additionally, with the increase of M/P, the compressive strength of MPC-ECC increases, but the ultimate tensile stress decreases. The MPC-ECC with the Sd of 150–180 mesh shows significant strain hardening performance, and its ultimate tensile strain can exceed 5%. The large W/S is helpful to improve strain hardening performance, especially when the S/B is 0.2. In addition, when the FA content is 30% or 40%, the strain hardening performance of MPC-ECC is significant. The quantitative association model between ultimate tensile strain and pseudo strain-hardening indices was established. According to the association model, the design method of MPC-ECC was established, based on which the MPC-ECC with desired ductility can be realized. Meanwhile, the PSH σ and PSH J are recommended to reach 2.15 and 25.1, respectively, at the same time for the MPC-ECC with ultimate tensile strain of above 3%.

Influence and Mechanism of Ultra-High Molecular Weight Polyethylene on Mechanical and Electromagnetic Shielding Properties of Alkali-Activated Composite Mortar Based on Magnesium Slag, Blast-Furnace Slag and Silica Fume

Preparation and Study of Magnesium Ammonium Phosphate Cement from Waste Lithium Slag

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Modification of Magnesium Phosphate Cement with Steel Slag Powder and Ground Blast Furnace Slag: Mechanism of Hydration and Electrical Conductivity

High-value utilization of modified magnesium slag solid waste and its application as a low-carbon cement admixture

Electrochemical Behavior of Al/Mg Alloys Immobilized in a Magnesium Potassium Phosphate Cement-Based Mortar

Development and design of ultra-high ductile magnesium phosphate cement-based composite using fly ash and silica fume

Effects of Aluminum Silicate on Mechanical Strength and Microstructural Improvement of Magnesium Phosphate Cement Mortar

Exploring the Binding Potential of Magnesium Oxysulfate Cement with Multi-Source Solid Wastes

Experimental Investigation on Mechanical Properties of Eco-Cement Mortar Containing Mgo-Modified Phosphorous Slag

Water-resisting Performances and Mechanisms of Magnesium Phosphate Cement Mortars Comprising with Fly-Ash and Silica Fume

Electromagnetic Interference Shielding Performance and Piezoresistivity of Multifunctional Cement Composites by Adopting Conductive Aggregates

Preparation and mechanical characterization of multi-functional high-ductility engineered magnesium oxysulfate cement-based composites

Study on Physical and Chemical Properties of High Magnesium Nickel Slag-Phosphogysum Composite Cementitious Materials in Different Particle Sizes

Mechanical properties and leaching behavior of modified magnesium slag cemented aeolian sand paste backfill materials

Mechanical properties and electromagnetic wave absorption characteristics of solid waste low-carbon cementitious materials

Improving immobilization efficiency and mechanism analysis of sodium hexametaphosphate on MgO-based cementitious material solidified MSWI FA

Recycling of waste magnesia refractory brick powder in preparing magnesium phosphate cement mortar: Hydration activity, mechanical properties and long-term performance

Mechanical properties and environmental characteristics of the synergistic preparation of cementitious materials using electrolytic manganese residue, steel slag, and blast furnace slag

Study on the mechanism and mechanical properties of magnesium oxychloride cement for blocking pollutants migration from electrolytic manganese residue

Magnesium phosphate cement-based engineered cementitious composites with polyethylene fibers: Performance improvement and design method