Abstract:The environmental damage caused by surface subsidence and coal-based solid waste (CBSW) is a common problem in the process of coal mining. Backfill mining can control the mining-induced subsidence and solve the problem of bulk solid waste storage. In the present work, a magnesium-coal slag solid waste backfill material (MCB) with modified magnesium slag (MS) as binder and CBSW (fly ash (FA), flue gas desulfurization gypsum (FDG) and coal gasification slag (CGS)) as supplementary cementitious material/aggregate was proposed to meet the needs of coal mining in Northern Shaanxi, China, to realize the comprehensive treatment of goaf and CBSW. The results show that: (1) The rheological curve of the fresh MCB slurry is highly consistent with the Herschel-Bulkley (H–B) model, and its fluidity meets the basic requirements of mine backfill pumping. With the addition of FDG and MS, the yield stress, apparent viscosity and thixotropy of MCB slurry increase, while the pseudoplastic index and slump decrease. (2) The strength of MCB develops slowly in the early stage (0∼14 days) and increases rapidly in the later stage (14∼90 days). Except for the ratio of M20F1 and FDG = 0%, the strength of samples at other ratios (at 28 days) is between 6.06∼11.68 MPa, which meets the strength requirement of 6 MPa for coal mine backfill. The addition of MS and appropriate amount of FDG is beneficial to the development of strength. In contrast, MS exhibits a significant improvement in early strength, and FDG has a significant improvement in late-age strength. (3) Corresponding to the compressive strength, the hydration products C–S(A)-H and AFt of MCB are less in the early stage and greatly increased in the later stage. The active substance in FA/CGS will undergo pozzolanic reaction with the MS hydration product CH. The addition of FDG and MS can promote the reaction and increase the amount of hydration product, but in contrast, the promotion effect of FDG is more significant. (4) The amount of heavy metal leaching of MCB meets the requirements of national standards. The hardened MCB has a solidification/stabilization effect on heavy metal elements, which can significantly reduce the amount of heavy metal leaching. The results imply that MCB is a safe, reliable, and eco-friendly solid waste backfill material, and its application is conducive to the coordinated development of coal resource mining and environmental protection.

Mechanical properties and leaching behavior of modified magnesium slag cemented aeolian sand paste backfill materials

Co-disposal of magnesium slag and high-calcium fly ash as cementitious materials in backfill

Application of desulfurization gypsum as activator for modified magnesium slag-fly ash cemented paste backfill material

Development and field application of a modified magnesium slag-based mine filling cementitious material

Basic characteristics of magnesium-coal slag solid waste backfill material: Part I. preliminary study on flow, mechanics, hydration and leaching characteristics

Properties of Cemented Filling Materials Prepared from Phosphogypsum-Steel Slag-Blast-Furnace Slag and Its Environmental Effect

A preliminary study of aeolian sand-cement-modified gasification slag-paste backfill: Fluidity, microstructure, and leaching risks

Feasibility of using fly ash–slag-based binder for mine backfilling and its associated leaching risks

Influence of Internal and External Factors on the Fluidity of Modified Magnesium Slag-Based Backfill Materials

Strength and leaching behavior of tailing-based paste backfill at high water content amended with lime activated ground granulated blast furnace slag and flocculant

Review on Comprehensive Utilization of Magnesium Slag and Development Prospect of Preparing Backfilling Materials

Study on application and environmental effect of phosphogypsum-fly ash-red mud composite cemented paste backfill

Preparation of New Copper Smelting Slag-based Mine Backfill Material and Investigation of Its Mechanical Properties

High-value utilization of modified magnesium slag solid waste and its application as a low-carbon cement admixture

Mechanical grinding activation of modified magnesium slag and its use as backfilling cementitious material

Study and Discussion of Short-Strip Coal Pillar Recovery with Cemented Paste Backfill

Mechanical and Environmental Characteristics of Cemented Paste Backfill Containing Lithium Slag-Blended Binder

Study on Effects of Refining Slag on Properties and Hydration of Cemented Solid Waste-Based Backfill

Properties and environmental impact of building foundation pit backfilling materials containing iron and steel solid waste

Effect of Alkali-Activated Slag and Phosphogypsum Binder on the Strength and Workability of Cemented Paste Backfill and Its Environmental Impact

Investigation on rapid solidification of waste dredged sludge with magnesium phosphate cement modified by GGBFS