Abstract:The use of industrial solid waste to prepare cementitious materials can not only solve the pollution problem of ecological environment, but also help carbon emission reduction and sustainable development. In this work, typical alkaline solid waste - red mud (RM), sulfate solid waste - desulfurization gypsum (DG) and siliconaluminum character solid waste - fly ash (FA) were used to prepare cementitious materials. The influence of synergistic effect of RM-DG-FA on the mechanical performances and hydration products of cementitious materials were systematically investigated. The hydration products were characterized and analyzed by XRD, TG, FTIR, MIP and SEM-EDS. It was found that the mechanical performances of cementitious materials were significantly improved under the synergistic effect of three kinds of solid wastes. When the content of the three solid wastes was 50%, the compressive strength of the cementitious materials at 28 d was 50.60 MPa, and the mechanical performances at each age were higher than the # 42.5 Portland cement standard. The microstructure results showed that under the synergistic action of alkali and sulfate, the active silicon and aluminum substances in RM and FA can quickly participate in the reaction, which makes the hydration degree of cementitious materials can move to the reaction direction with higher polymerization degree. The hydration products mainly included ettringite, C-S-H and C(N)-A-S-H gel. A large amount of gel and ettringite grew alternately, which reduced the porosity and formed a dense structure of the cementitious materials matrix, and its mechanical performances were improved. The leaching results showed that the synergistic effect also improved the solidification ability of the cementitious materials to Na+. In this work, the synergistic effect of RM-DG-FA significantly increased the utilization of solid wastes and the performances of cementitious materials. The research results provided a scientific basis for improving the utilization rate of alkaline solid wastes, sulfate solid wastes and silicon-aluminum character solid wastes and their collaborative utilization as building materials.

Utilization of Industrial Wastes on the Durability Improvement of Cementitious Materials: A Comparative Study Between FA and GGBFS

Study on the Synergistic Effect of Calcium Carbide Residue -Fly Ash Enhanced Desulphurisation Gypsum under High Temperature Maintenance Condition

Mechanical Properties, Microstructure and Life-Cycle Assessment of Eco-Friendly Cementitious Materials Containing Circulating Fluidized Bed Fly Ash and Ground Granulated Blast Furnace Slag

Synergistic Effect of Red Mud, Desulfurized Gypsum and Fly Ash in Cementitious Materials: Mechanical Performances and Microstructure

Enhancing microstructure and durability of concrete from ground granulated blast furnace slag and metakaolin as cement replacement materials

Performance and Microstructure of Sustainable Cementitious Materials Mixed by Municipal Sewage Sludge Ash, Slag, and Fly Ash

The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste

The Properties of the Self-Compacting Concrete with Fly Ash and Ground Granulated Blast Furnace Slag Mineral Admixtures

Synergic Effects of Circulating Fluidized Bed Fly Ash-Red Mud-Blast Furnace Slag in Green Cementitious Materials: Hydration Products and Environmental Performance

Up to 100% Replacement of Natural Materials from Residues: Recycling Blast Furnace Slag and Fly Ash as Self-Leveling Cementitious Building Materials

Synthesis and Characterization of Cemented Paste Backfill: Reuse of Multiple Solid Wastes

Utilization of coal gangue power generation industry by-product CFA in cement: Workability, rheological behavior and microstructure of blended cement paste

Mechanical properties and hydration behaviour of circulating fluidised bed fly ash- ground granulated blast furnace slag-lime ecofriendly cementitious material

Modification mechanism of flue gas desulfurization gypsum on fly ash and ground granulated blast-furnace slag alkali-activated materials: Promoting green cementitious material

Resource utilization of solid waste from steel industries in cement-based cementitious materials: Mechanical properties, hydration behaviors, and environmental impact

Study on the Alkali–Sulfur Co-Activation and Mechanical Properties of Low-Carbon Cementitious Composite Materials Based on Electrolytic Manganese Residue, Carbide Slag, and Granulated Blast-Furnace Slag

Study on High-Strength Composite Portland Cement with a Larger Amount of Industrial Wastes

Effect of Superfine Blast Furnace Slag Powder on Properties of Cement-Based Materials

Effectiveness of Soda Residue-Activated GGBS As Alternative Binder on Compressive Strength and Workability of Cemented Paste Backfills: Reuse of Multi-Source Solid Wastes

Influence Behavior of Phosphorus Slag and Fly Ash on the Interface Transition Zone in Concrete Prepared by Cement-Red Mud

The Ratio Optimization and Hydration Mechanism of Multi Source Solid Waste Cementitious Materials