Sulfur Vacancies and a Ni2P Co-Catalyst Synergistically Boost the Photocatalytic H2 Evolution of Zn0.5Cd0.5S

Lindong Xia,Wenzhen Qin,Yu Xie,Yiqiao Wang,Yun Ling

DOI: https://doi.org/10.1039/d3gc04940j

IF: 9.8

2024-01-01

Green Chemistry

Abstract:Improving the separation efficiency of photo-generated electron–hole pair is a key issue in the field of photocatalytic hydrogen production.

What problem does this paper attempt to address?

Sulfur vacancies and a Ni 2 P co-catalyst synergistically boost the photocatalytic H 2 evolution of Zn 0.5 Cd 0.5 S

Lindong Xia,Wenzhen Qin,Yu Xie,Yiqiao Wang,Yun Ling

DOI: https://doi.org/10.1039/d3gc04940j

IF: 9.8

2024-02-02

Green Chemistry

Abstract:Improving the separation efficiency of photo-generated electron–hole pair is a key issue in the field of photocatalytic hydrogen production. In this work, we successfully improved the efficiency of photo-generated carrier separation using the synergistic action of sulfur (S) vacancies and a Ni 2 P co-catalyst. Vs-Zn 0.5 Cd 0.5 S (Vs-ZCS) with S vacancies was designed and constructed, and Vs-ZCS/Ni 2 P photocatalysts were prepared with non-precious metal Ni 2 P as a co-catalyst. Among all the produced materials, Vs-ZCS/Ni 2 P-5% has a photocatalytic characteristic of 40.81 mmol g −1 h −1 , which is 7.88, 3.08 and 3.75 times greater than those of ZCS (5.18 mmol g −1 h −1 ), Vs-ZCS (13.25 mmol g −1 h −1 ) and ZCS/Ni 2 P-5% (10.88 mmol g −1 h −1 ), respectively. The results of transient photo-current, electrochemical impedance spectroscopy, photoluminescence and time-resolved fluorescence show that the synergistic effect of S vacancies and Ni 2 P significantly promotes the separation and transfer efficiency of photo-generated carriers, as well as the photocatalytic hydrogen production reaction. Superoxide radicals and electrons are the active species for photocatalytic hydrogen generation, which is confirmed by active species capture tests and EPR. This study presents an innovative approach for developing photocatalysts with low cost and good catalytic performance.

chemistry, multidisciplinary,green & sustainable science & technology
Enhanced hydrogen evolution via interlaced Ni 3 S 2 /MoS 2 heterojunction photocatalysts with efficient interfacial contact and broadband absorption

Shaohui Guo,Lin Yang,Yuanyuan Zhang,Zhixiang Huang,Xingang Ren,Wei E. I. Sha,Xuanhua Li

DOI: https://doi.org/10.1016/j.jallcom.2018.03.329

IF: 6.2

2018-01-01

Journal of Alloys and Compounds

Abstract:The development of transition-metal sulfides, such as nickel sulfides (e.g., Ni3S2), as catalysts for the hydrogen evolution reaction is one potential solution to environmental pollution and energy crisis. However, its limited utilization of visible light and high recombination ratio of photoinduced electron–hole pairs suppress its photocatalytic activity. The key issue in improving photocatalytic efficiency lies in fabricating a p–n heterojunction with efficient interfacial contact and broadband absorption. Here, we developed a method for fabricating an interlaced Ni3S2/MoS2 heterostructure with close interfacial contact. In our fabrication approach, a porous Ni3S2 scaffold is prepared by chemical vapor deposition and a hydrothermal method is used to prepare a Ni3S2/MoS2 photocatalyst with close interfacial contact. The numerous interfaces of the interlaced Ni3S2/MoS2 heterostructures promote effective electron–hole pair separation and facilitate electron transfer. Meanwhile, the hybrid Ni3S2/MoS2 nanostructures favor broadband absorption extending from 300 to 800 nm. As a result, the hybrid Ni3S2/MoS2 exhibits a remarkable rate of hydrogen evolution (540.75 μmol g−1 h−1), which is 5.71 and 3.89 times greater than those of pure Ni3S2 and MoS2, respectively, under otherwise identical conditions. The results of this work are significant for developing promising transition-metal sulfide heterostructures in the field of hydrogen evolution by photocatalytic water splitting.
Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Mingyuan Zhang,Pengfei Tan,Lu Yang,Huanhuan Zhai,Hele Liu,Jiaoyang Chen,Ruifeng Ren,Xiyu Tan,Jun Pan

DOI: https://doi.org/10.1016/j.jcis.2022.12.051

2023-03-15

Abstract:Constructing a p-n heterojunction with vacancy is advantageous for speeding up carrier separation and migration due to the synergy of the built-in electric field and electron capture of the vacancy. Herein, a sulfur vacancy riched-ZnIn2S4/NiWO4 p-n heterojunction (VZIS/NWO) photocatalyst was rationally designed and fabricated for photocatalytic hydrogen evolution. The composition and structure of VZIS/NWO were characterized. The existence of sulfur vacancy was confirmed through X-ray photoelectron spectroscopy, high-resolution transmission electron microscope, and electron paramagnetic resonance technology. The p-n heterojunction formed by ZnIn2S4 and NiWO4 was proved to provide a convenient channel to boost interfacial charge migration and separation. By reducing the band gap, the vacancy engineer can improve light absorption as well as serve as an electron trap to improve photo-induced electron-hole separation. Benefiting from the synergy of p-n heterojunction and vacancy, the optimal VZIS/NWO-5 catalyst exhibits dramatically enhanced H2 generation performance, which is about 10-fold that of the pristine ZnIn2S4. This work emphasizes the synergy between p-n heterojunction and sulfur vacancy for enhancing photocatalytic hydrogen evolution performance.
Porous ZnIn2S4 with Confined Sulfur Vacancies for Highly Efficient Visible-Light-driven Photocatalytic H2 Production

Wen Li Jia,Xuefeng Wu,Yuanwei Liu,Jia Yue Zhao,Yang Zhang,Peng Fei Liu,Qilin Cheng,Hua Gui Yang

DOI: https://doi.org/10.1039/d2ta07302a

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:A porous ZnIn2S4 photocatalyst rich in sulfur vacancies shortens the charge transfer pathway, rapidly capturing the photogenerated electrons, which enhances the separation and migration ability of photoexcited charge carriers, thus enhancing photocatalytic H2 evolution.
Sulfur vacancies-induced “Electron Bridge” in Ni4Mo/Sv-Zn Cd1-S regulates electron transfer for efficient H2-releasing photocatalysis

Xin Zhang,Manyi Gao,Longyu Qiu,Jie Sheng,Weiwei Yang,Yongsheng Yu

DOI: https://doi.org/10.1016/j.jechem.2023.01.001

IF: 13.1

2023-04-01

Journal of Energy Chemistry

Abstract:Despite the existence of plentiful photocatalyst heterojunctions, their separation efficiency and charge flow precision remain low on account of lacking interfacial modulation.Herein, through a defect-induced heterojunction constructing strategy, Ni4Mo alloys were in-situ grown on the unsaturated coordinated sulfur atoms of sulfur vacancies-rich ZCS (Sv-ZCS) via interfacial Ni-S covalent bonds. The experimental and theoretical results reveal that these unsaturated sulfur atoms induced by sulfur vacancies vastly facilitate to anchor more Ni-Mo nanoparticles and form abundant Ni-S covalent bonds, meanwhile, these sulfur vacancies could form dual internal electric field (IEF) and work with Ni-S covalent bonds as “Electron Bridge” to further accelerate photoelectrons transfer, as well as promote the activation of water molecules and the desorption of hydrogen proton. Accordingly, the optimized Ni4Mo/Sv-ZCS composite achieves an improved photocatalytic hydrogen evolution (PHE) rate of 94.69 mmol h−1 g−1 without an evident decrease after 6 cycles of photocatalytic tests, which is 21.2 and 1.94 times higher than those of Pt/ZCS and Ni4Mo/ZCS, respectively. This tactic opens a new way for optimizing Zn x Cd1- x S-based heterojunctions by constructing sulfur vacancies and covalent bonds as “Electron Bridge” to enhance the activity of PHE.

chemistry, physical,engineering, chemical, applied,energy & fuels
Sulfur vacancies engineered over Cd 0.5 Zn 0.5 S by Yb 3+ /Er 3+ co-doping for enhancing photocatalytic hydrogen evolution

Ping Mu,Man Zhou,Kai Yang,Chensheng Zhou,Yuan Mi,Zhenzhen Yu,Kangqiang Lu,Zhengquan Li,Shaobo Ouyang,Weiya Huang,Changlin Yu

DOI: https://doi.org/10.1039/d1se01384j

2021-01-01

Abstract:Sulfur vacancies can improve photocatalytic properties, which can be the center of the electrons-captured state to promote the separation and transfer of photogenerated carriers.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Porous ZnIn 2 S 4 with confined sulfur vacancies for highly efficient visible-light-driven photocatalytic H 2 production

Wen Li Jia,Xuefeng Wu,Yuanwei Liu,Jia Yue Zhao,Yang Zhang,Peng Fei Liu,Qilin Cheng,Hua Gui Yang

DOI: https://doi.org/10.1039/d2ta07302a

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:A porous ZnIn 2 S 4 photocatalyst rich in sulfur vacancies shortens the charge transfer pathway, rapidly capturing the photogenerated electrons, which enhances the separation and migration ability of photoexcited charge carriers, thus enhancing photocatalytic H 2 evolution.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Synergism of Sulfur Vacancy and Schottky Junction in Ni/Znin2s4 Nanosheet Assembly for Efficient Charge Separation and Photocatalytic Hydrogen Evolution

Hui Chen,Mingxia Li,Jinyu Gao,Decai Yang,Zhenzi Li,Haixia Liu,Ying Xie,Liping Guo,Wei Zhou

DOI: https://doi.org/10.1016/j.apsusc.2023.157385

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Surface and interface engineering play vital roles on improving the photocatalytic hydrogen evolution. Herein, Ni/ZnIn2S4 nanosheet assembly with sulfur vacancy and Schottky junction (Ni/DZIS) is fabricated through facile ethanediol-assisted solvothermal method. Density functional theory (DFT) calculation reveals that the Ni is absorbed at the hollow site of three S atoms next to sulfur vacancy on the ZnIn2S4 (006) face due to the formation of sulfur vacancy. The resultant Ni/DZIS Schottky junction exhibits high photocatalytic H2 evolution rate of 703 μmol g−1 h−1 without any noble metal cocatalysts, which is 2.6 times higher than that of pristine ZnIn2S4 nanosheets. The improved photocatalytic performance is mainly attributed to the synergism of sulfur vacancy and Schottky junction accelerating the photogenerated charge transfer and thus inhibiting the charge recombination. Moreover, the photocatalytic performance of Ni/DZIS nearly keeps constant even after six recycles, indicating the high stability and potential applications in field of energy. This work provides a convenient strategy for constructing efficient defective heterojunction assembly photocatalysts via surface and interface engineering.
Synergism of Sulfur Vacancy and Schottky Junction in Ni/ZnIn 2 S 4 Nanosheet Assembly for Efficient Charge Separation and Photocatalytic Hydrogen Evolution

Hui Chen,Mingxia Li,Jinyu Gao,Decai Yang,Zhenzi Li,Haixia Liu,Ying Xie,Liping Guo,Wei Zhou

DOI: https://doi.org/10.1016/j.apsusc.2023.157385

IF: 6.7

2023-05-01

Applied Surface Science

Abstract:Surface and interface engineering play vital roles on improving the photocatalytic hydrogen evolution. Herein, Ni/ZnIn 2 S 4 nanosheet assembly with sulfur vacancy and Schottky junction (Ni/DZIS) is fabricated through facile ethanediol-assisted solvothermal method. Density functional theory (DFT) calculation reveals that the Ni is absorbed at the hollow site of three S atoms next to sulfur vacancy on the ZnIn 2 S 4 (006) face due to the formation of sulfur vacancy. The resultant Ni/DZIS Schottky junction exhibits high photocatalytic H 2 evolution rate of 703 μmol g −1 h −1 without any noble metal cocatalysts, which is 2.6 times higher than that of pristine ZnIn 2 S 4 nanosheets. The improved photocatalytic performance is mainly attributed to the synergism of sulfur vacancy and Schottky junction accelerating the photogenerated charge transfer and thus inhibiting the charge recombination. Moreover, the photocatalytic performance of Ni/DZIS nearly keeps constant even after six recycles, indicating the high stability and potential applications in field of energy. This work provides a convenient strategy for constructing efficient defective heterojunction assembly photocatalysts via surface and interface engineering.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Zn‐Vacancy Engineered S‐Scheme ZnCdS/ZnS Photocatalyst for Highly Efficient Photocatalytic H2 Evolution

Dingzhou Xiang,Xuqiang Hao,Zhiliang Jin

DOI: https://doi.org/10.1002/cctc.202100994

2021-08-24

Abstract:Vacancy defects engineering is a valid strategy to enhance the separation efficiency of photo‐generated charges. Herein, a zinc vacancy mediated S‐scheme ZnCdS/ZnS composite derived from ZnCdS/MOF‐5 was constructed in‐situ through the sacrificial reagent of Na2S/Na2SO3 aqueous solution in visible‐light irradiation. The MOF‐5 converted to ZnS (ZnS−VZn) with abundant zinc vacancies which were proved by the XPS and PL results. ZnS−VZn has two‐photon absorption performance, which immensely enhanced the visible light absorption capacity for the photocatalysts. The photo‐generated electrons of ZnS−VZn on the Zn‐vacancy defect would regroup with the holes in the valence band (VB) of ZnCdS via ohmic contact which is induced by Zn‐vacancy defects. Therefore, the photoexciton of ZnCdS can be able to separate effectively and eliminate the useless electrons and holes. The ZnCdS/ZnS(20) sample revealed an outstanding photocatalytic hydrogen generation rate of 12.31 mmol h−1g−1 with a turnover number (TON) of 64.61, which is about 82.06 and 21.98 times greater than that of neat ZnS−VZn and ZnCdS. This work gives an insight into the design of the zinc vacancy‐engineered S‐scheme photocatalyst of ZnCdS/ZnS for highly efficient photocatalysis.

Chemistry,Environmental Science,Materials Science
Zinc Vacancy-Promoted Photocatalytic Activity and Photostability of ZnS for Efficient Visible-Light-driven Hydrogen Evolution

Xuqiang Hao,Yicong Wang,Jun Zhou,Zhiwei Cui,Ying Wang,Zhigang Zou

DOI: https://doi.org/10.1016/j.apcatb.2017.09.006

2018-01-01

Abstract:Zinc sulfide is a superior photocatalyst for H-2 evolution, whereas the wide bandgap restricts its performance to only UV region. In this work, zinc vacancy (V-zn) defects are successfully introduced into ZnS via adding sodium sulfide as sulfur source during the hydrothermal reaction. The defective ZnS with different amount of zinc vacancies were employed as catalysts for the examination of vacancy-dependent catalytic activity toward photocatalytic hydrogen evolution under visible light irradiation. Fluorescence emission spectra and XPS results confirm that existence of abundant zinc vacancies on ZnS. These zinc vacancies exhibit remarkable effects on modifying the electronic structure of ZnS as shown in UV-visible absorption spectra and Mott-Schottky plots. Zinc vacancies can raise valence band (VB) position that weaken the oxidative capacity of the holes to protect Zn-deficient ZnS from photocorrsion. And electrochemical and photo-electrochemical experiments also demonstrate that the charge separation and the electrons transfer are more efficient with the introduction of the Zn vacancies in ZnS. The zinc-deficient ZnS-2.5 with optimum amount of Zn vacancies shows superior photo catalytic activity for H-2 evolution that reaches 337.71 +/- 3.72 mu mol h(-1) g(-1) under visible-light irradiation and also exhibits a much higher photostability. The intrinsic modify by self-defects might be a potential strategy for design novel photocatalysts with photocorrosion stability and visible-light activity in photocatalysis proton reduction.
Synergistic manipulation of sulfur vacancies and palladium doping of In2S3 for enhanced photocatalytic H2 production

Ruyu Zhang,Xiaowei Jia,Mingliang Sun,Xianchun Liu,Cong Wang,Xiaodan Yu,Yan Xing

DOI: https://doi.org/10.1016/j.jcis.2024.07.242

2024-07-31

Abstract:In this study, a simple one-pot synthesis process is employed to introduce Pd dopant and abundant S vacancies into In2S3 nanosheets. The optimized Pd-doped In2S3 photocatalyst, with abundant S vacancies, demonstrates a significant enhancement in photocatalytic hydrogen evolution. The joint modification of Pd doping and rich S vacancies on the band structure of In2S3 result in an improvement in both the light absorption capacity and proton reduction ability. It is worth noting that photogenerated electrons enriched by S vacancies can rapidly migrate to adjacent Pd atoms through an efficient transfer path constructed by Pd-S bond, effectively suppressing the charge recombination. Consequently, the dual-defective In2S3 shows an efficient photocatalytic H2 production rate of 58.4 ± 2.0 μmol·h-1. Additionally, further work has been conducted on other ternary metal sulfide, ZnIn2S4. Our findings provide a new insight into the development of highly efficient photocatalysts through synergistic defect engineering.
Vacancy-induced 2H@1T MoS2 phase-incorporation on ZnIn2S4 for boosting photocatalytic hydrogen evolution

Yanhua Peng,Mengjie Geng,Jianqiang Yu,Yan Zhang,Fenghui Tian,Ya’nan Guo,Dongsheng Zhang,Xiaolong Yang,Zhuo Li,Zixin Li,Shengyue Zhang

DOI: https://doi.org/10.1016/j.apcatb.2021.120570

2021-12-01

Abstract:Photocatalytic hydrogen evolution (PHE) is of great significance to pursue sustainable and clean fuel, however, it remains a great challenge due to the high recombination of photo-generated carriers and low efficiency of surface catalytic activity. Here, we discover the synergistic regulations of both structural and electronic benefits by introducing sulfur vacancies in a 1T-MoS2 nanosheets host to prompt the transformation of the surrounding 1T-MoS2 local lattice into a 2H phase, leading to the dramatically enhanced PHE activity. Multiple in situ spectroscopic and microscopic characterizations combined with theoretical calculations demonstrated that in-plane sulfur vacancies as active sites can activate the proton, while the 2H@1T-MoS2 phase-incorporation can effectively regulate the electronic structure and further improve the conductivity. Therefore, the optimized ZnIn2S4@MoS2 photocatalyst achieves a high PHE activity of 23,233 μmol g−1 with an apparent quantum yield (AQY) of ∼5.09 %. This work provides a new design for improving the photocatalytic activity by synergistically structural and electronic modulations.

chemistry, physical,engineering, chemical, environmental
Cu Doped Sns2 Nanostructure Induced Sulfur Vacancy Towards Boosted Photocatalytic Hydrogen Evolution

Yue Liu,Yansong Zhou,Xin Zhou,Xiaoli Jin,Beibei Li,Jingyuan Liu,Gang Chen

DOI: https://doi.org/10.1016/j.cej.2020.127180

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Tin disulfide (SnS2) has been recognized as a promising nonprecious photocatalyst for hydrogen evolution using solar energy. Herein, sulfur vacancies are introduced to SnS2 photocatalyst by doping Cu for improving photocatalytic efficiency. The generation of sulfur vacancies enables formation of a new donor level near the conduction band minimum (CBM), resulting in the higher separation efficiency of photogenerated carriers and increased carrier density. Additionally, a theoretical study reveals that incorporating Cu and sulfur vacancies reduces the work function of SnS2, making it easier for photogenerated electrons to react with water. As a result, the hydrogen generation rate of sample 5%Cu/SnS2-x reaches 1.37 mmol h(-1) g(-1) under visible-light, far exceeding (more than 6 times) that of pure SnS2 nanoplates. This work not only reinforces the new understanding of defect engineering in SnS2-based photocatalysts but also provides valuable guides in rationally designing new efficient photocatalysts.
Porous ZnIn2S4 with confined sulfur vacancies for highly efficient visible-light-driven photocatalytic H-2 production

Wen Li Jia,Xuefeng Wu,Yuanwei Liu,Jia Yue Zhao,Yang Zhang,Peng Fei Liu,Qilin Cheng,Hua Gui Yang

DOI: https://doi.org/10.1039/d2ta07302a

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:Ternary ZnIn2S4 (ZIS) chalcogenide is regarded as a promising candidate for photocatalytic hydrogen production performance; however, its activity is limited by the low separation efficiency and poor migration ability of photoexcited charge carriers. Herein, porous ZnIn2S4 photocatalysts with confined sulfur vacancies were successfully fabricated, alleviating the above issues that impair the hydrogen evolution rate. Due to the pore structure, the charge transfer diffusion pathway is greatly shortened. Furthermore, the sulfur vacancies can serve as electron trapped centers, which greatly suppresses the recombination of photogenerated carriers. As a result, the porous ZnIn2S4 with confined sulfur vacancies exhibits an optimum hydrogen evolution rate of up to 1537.65 +/- 118.65 mu mol h(-1) (61 506 +/- 4746 mu mol g(-1) h(-1)), which is approximately 6 times higher than that of pristine ZIS, and achieves an apparent quantum efficiency of 56.53% at 420 +/- 15 nm. This work highlights the synergistic effects of pore structure and vacancy structure for enhancing H-2 evolution performance, and further provides new ideas to design and synthesize novel photocatalysts for highly efficient solar energy conversion.
Interfacial W-S Bond and Sulfur Vacancy-Enhanced W/Sv-CdS Photocatalysts for Efficient Hydrogen Evolution

Ming Xie,Tong Li,Xueqi Zhang,Kang le Wan,Wei Yan,Yingcong Wei,Jing Xu

DOI: https://doi.org/10.1016/j.jece.2024.114932

IF: 7.7

2024-01-01

Journal of Environmental Chemical Engineering

Abstract:Metal cocatalysts play a crucial role in facilitating charge separation and promoting surface reaction kinetics in photocatalytic processes. There is an increasing interest in optimizing both the properties of metal cocatalysts and the interactions between cocatalysts and main catalyst. Herein, the smartly-designed tungsten/sulfur vacancies-rich CdS (W/Sv-CdS) photocatalysts with abundant interface W-S bonds were synthesized for efficient photocatalytic hydrogen evolution. The interface W-S bonds between Sv-CdS and W act as atomic level electron transfer channels, reducing the potential energy barrier for interface charge transfer. The introduction of S-vacancies improves the separation and transport efficiency of charge carriers. As a result, W/Sv-CdS photocatalysts exhibit an enhanced hydrogen evolution rate of up to 56mmolh−1 g−1 and an apparent quantum efficiency of 26.5% at 425nm, significantly higher than that Sv-CdS and W/CdS. This work provides reliable guidance for the design and construction of a low-cost, efficient and durable CdS cocatalyst, opening up new avenues and possibilities for energy and environment-related applications.
Ultrathin Nickel‐doped ZnIn 2 S 4 Nanosheets with Sulfur Vacancies for Efficient Photocatalytic Hydrogen Evolution

Wangxi Liu,Jianmin Chen,Xueling Pan,Tingting Wang,Yingwei Li

DOI: https://doi.org/10.1002/cctc.202101267

IF: 4.5

2021-10-25

ChemCatChem

Abstract:Introducing vacancies and element doping are effective approaches to boost photocatalytic activities of metal sulfides. In this work, sulfur vacancies and nickel dopants were simultaneously introduced into ultrathin ZnIn2S4 nanosheets (ZIS NSs) to explore their synergistic role in promoting photocatalytic hydrogen evolution. The S vacancies can trap the photo-generated electrons, lower the conduction band minimum (CBM), improve the photo-generated charge reduction capacity and prolong the carrier lifetime. Meanwhile, Ni dopants cause an increase in the Fermi level (EF), which ensures a higher charge density and an effective carrier separation efficiency. The optimum hydrogen evolution rate of sample Ni0.05-VS-ZIS reaches 8.91 mmol·g-1·h-1 under visible light due to the synergistic effect of the S vacancies and Ni dopants.

chemistry, physical
S Vacancy Modulated ZnxCd1-xS/CoP Quantum Dots for Efficient H2 Evolution from Water Splitting under Visible Light

Qi Xie,Min Wang,Yong Xu,Xiaoke Li,Xin Zhou,Liang Hong,Luhua Jiang,Wen-Feng Lin

DOI: https://doi.org/10.1016/j.jechem.2021.03.019

IF: 13.1

2021-01-01

Journal of Energy Chemistry

Abstract:Energy band structure and interfacial compatibility of heterojunctions are crucial for photocatalysts in promoting photogenerated charge separation and transfer. Here, a combined strategy of vacancy engineering and quantum effect via a facile phosphating process is reported, for the first time, to modulate the energy band structure and the interface of ZnxCd1-xS/CoP quantum dots (ZCS(v)/CoP QDs) heterojunction. The combined experimental and theoretical investigation revealed that phosphating process transformed CoOx QDs to CoP QDs, and more importantly, generated considerable amount of sulfur vacancies in ZCS(v). As a result, a Type II ZCS(v)/CoP QDs heterojunction with compatible interfaces was constructed via in-situ generated P-Zn, P-Cd and S-Co bonds, which facilitated the separation and transfer of the photogenerated charge and thus resulted in a high ability towards hydrogen evolution under visible light (17.53 mmol g(-1) h(-1)). This work provides an effective and adaptable strategy to modulate band structure and interfacial compatibility of heterojunctions via vacancy engineering and quantum effect. (C) 2021 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
Enhancing Photocatalytic H2 Evolution of Cd0.5zn0.5s with the Synergism of Amorphous Cos Cocatalysts and Surface S2− Adsorption

Longxin Hu,Xing Liu,Rui Dai,Hua Lai,Junhua Li

DOI: https://doi.org/10.1016/j.fuel.2024.133737

IF: 7.4

2025-01-01

Fuel

Abstract:Designing surface phase is an efficient strategy to facilitate charge separation and photocatalytic H2-evolution performance. In this work, CoS cocatalysts were intimately anchored on Cd0.5Zn0.5S (denoted as CZS) photocatalyst via in-situ precipitate transformation in S2−/SO32− solution with cobaltous phosphate (CoPi) as a precursor, meanwhile, S2− ions were adsorbed on the CZS to form a sulfur-rich surface (denoted as CZS-S). The photocatalytic H2-evolution rate of CoS/CZS-S is 2.02 mmol·g−1·h−1 in 0.1 M Na2S/Na2SO3 sacrificial agent system. In addition, CoS/CZS-S exhibits excellent stability in both Na2S/Na2SO3 and lactic acid system. The theoretical calculations (DFT) and experimental results reveal that amorphous CoS can work as a highly effective cocatalyst for H2 evolution reaction and the intimate contact between CZS and CoS facilitates the photoelectrons transfer from CZS to CoS. The adsorbed S2− ions mainly work as effective hole acceptors. As a result of the synergism of CoS and adsorbed S2− ions, the boosted separation and immigration of photoelectrons and photoholes and high photocatalytic H2-evolution performance of CoS/CZS-S are realized. The present work highlights simultaneous reinforcing reduction and oxidation half-reaction dynamics via a facile and economic surface strategy to achieve efficient solar H2-evolution from H2O splitting.
Photoinduced Generation of Metastable Sulfur Vacancies Enhancing the Intrinsic Hydrogen Evolution Behavior of Semiconductors

Guiyang Yu,Xin Zhou,Haitao Zhao,Wenxiang Zhang,Wenfu Yan,Gang Liu

DOI: https://doi.org/10.1002/solr.202100580

IF: 9.1726

2021-09-24

Solar RRL

Abstract:Hydrogen evolution over pristine semiconductor is desirable but seldom realized in powdered photocatalysis. It requires the catalyst surface simultaneously possessing efficient electron transfer and rapid H2 production properties. Current semiconductor photocatalysts have to depend on additional cocatalysts to achieve H2 evolution process. Here, theoretical and experimental results demonstrate that metastable sulfur vacancy could significantly enhance the intrinsic H2 evolution behavior of semiconductors. The hydrogen adsorption free energy (ΔGH) of CdS could be optimized to ΔGH=0.01 eV, much lower than that over thermodynamically stable vacancies (ΔGH=0.31 eV). The experiment was carried out based on a kind of supported CdS nanoparticles prepared with anion exchange method. A series of in-situ characterizations disclose that metastable sulfur vacancy forms under photoexcitation and is stable during the reaction. These metastable sulfur vacancies cause the formation of intermediate states between the valence band and the conduction band that increase transportation and utilization of photogenerated electrons. The conceptual finding of critical role of metastable vacancy in enhancing H2 evolution would bring new thinking on the design of semiconductor photocatalysts less dependent on cocatalysts.This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary

Sulfur Vacancies and a Ni2P Co-Catalyst Synergistically Boost the Photocatalytic H2 Evolution of Zn0.5Cd0.5S

Sulfur vacancies and a Ni 2 P co-catalyst synergistically boost the photocatalytic H 2 evolution of Zn 0.5 Cd 0.5 S

Enhanced hydrogen evolution via interlaced Ni 3 S 2 /MoS 2 heterojunction photocatalysts with efficient interfacial contact and broadband absorption

Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Porous ZnIn2S4 with Confined Sulfur Vacancies for Highly Efficient Visible-Light-driven Photocatalytic H2 Production

Sulfur vacancies-induced “Electron Bridge” in Ni4Mo/Sv-Zn Cd1-S regulates electron transfer for efficient H2-releasing photocatalysis

Sulfur vacancies engineered over Cd 0.5 Zn 0.5 S by Yb 3+ /Er 3+ co-doping for enhancing photocatalytic hydrogen evolution

Porous ZnIn 2 S 4 with confined sulfur vacancies for highly efficient visible-light-driven photocatalytic H 2 production

Synergism of Sulfur Vacancy and Schottky Junction in Ni/Znin2s4 Nanosheet Assembly for Efficient Charge Separation and Photocatalytic Hydrogen Evolution

Synergism of Sulfur Vacancy and Schottky Junction in Ni/ZnIn 2 S 4 Nanosheet Assembly for Efficient Charge Separation and Photocatalytic Hydrogen Evolution

Zn‐Vacancy Engineered S‐Scheme ZnCdS/ZnS Photocatalyst for Highly Efficient Photocatalytic H2 Evolution

Zinc Vacancy-Promoted Photocatalytic Activity and Photostability of ZnS for Efficient Visible-Light-driven Hydrogen Evolution

Synergistic manipulation of sulfur vacancies and palladium doping of In2S3 for enhanced photocatalytic H2 production

Vacancy-induced 2H@1T MoS2 phase-incorporation on ZnIn2S4 for boosting photocatalytic hydrogen evolution

Cu Doped Sns2 Nanostructure Induced Sulfur Vacancy Towards Boosted Photocatalytic Hydrogen Evolution

Porous ZnIn2S4 with confined sulfur vacancies for highly efficient visible-light-driven photocatalytic H-2 production

Interfacial W-S Bond and Sulfur Vacancy-Enhanced W/Sv-CdS Photocatalysts for Efficient Hydrogen Evolution

Ultrathin Nickel‐doped ZnIn 2 S 4 Nanosheets with Sulfur Vacancies for Efficient Photocatalytic Hydrogen Evolution

S Vacancy Modulated ZnxCd1-xS/CoP Quantum Dots for Efficient H2 Evolution from Water Splitting under Visible Light

Enhancing Photocatalytic H2 Evolution of Cd0.5zn0.5s with the Synergism of Amorphous Cos Cocatalysts and Surface S2− Adsorption

Photoinduced Generation of Metastable Sulfur Vacancies Enhancing the Intrinsic Hydrogen Evolution Behavior of Semiconductors