Abstract:The effect of nozzle surface features on the overall atomization behavior of a liquid jet is analyzed in the present computational work by adopting three representative geometries, namely a single X-ray tomography scan of the Engine Combustion Network’s Spray A nozzle (Unprocessed), a spline reconstruction of multiple scans (Educated), and a purely external flow configuration. The latter configuration is often used in fundamental jet atomization studies. Numerically, the two-phase flow is solved based on algebraic volume-of-fluid methodology utilizing the OpenFoam solver, interFoam. Quantitative characterization of the surface features concerning the first two geometries reveals that while both of them have similar levels of cylindrical asymmetries, the nozzle configuration pertaining to the Unprocessed geometry has much larger surface features along the streamwise direction than the Educated geometry. This produces for the Unprocessed configuration a much larger degree of non-axial velocity components in the flow exiting the orifice and also a more pronounced disturbance of the liquid surface in the first few diameters downstream of the nozzle orifice. Furthermore, this heightened level of surface destabilization generates a much shorter intact liquid core length, that is, it produces faster primary atomization. The surprising aspect of this finding is that the differences between the Unprocessed and Educated geometries are of [Formula: see text](1) μm, and they are able to produce [Formula: see text](1) mm effects in the intact liquid core length. In spite of more pronounced atomization for the Unprocessed geometry, the magnitude of the turbulent liquid kinetic energy is roughly the same as the Educated geometry. This highlights the important role of mean field quantities, in particular, non-axial velocity components, in precipitating primary atomization. At the other end of the spectrum, the external-only configuration has the mildest level of surface disturbances in the near field resulting in the longest intact liquid core length.

Multi-Objective Optimization of Atomization Characteristics Based on Geometric Features of Pressure Swirl Nozzle

Measurement of Atomization Characteristics on Water Mist Fire Suppression Nozzle

INVESTIGATION OF ATOMIZATION PERFORMANCE ON A CENTRIFUGAL FUEL SLINGER WITH A PHASE DOPPLER ANEMOMETER

Multi-objective parameters optimization design of self-excited oscillation pulsed atomizing nozzle

Study on the Atomization Characteristics of High-pressure Nozzle with an In-line Distributor

Optimization of atomization performance of external mixing air atomizing nozzle based on response surface agent model

Study on spray characteristics of a compact pressure swirl nozzle integrating tangential inlet flow channel and swirl chamber

Multi-Physics Coupled Acoustic-Mechanics Analysis and Synergetic Optimization for a Twin-Fluid Atomization Nozzle

Three-Dimensional Simulation Of Effervescent Atomization Spray

Optimization design of hydrogen Laval nozzle based on response surface methodology (RSM)

Mean Droplet Size Prediction of Twin Swirl Airblast Nozzle at Elevated Operating Conditions

Conical Liquid Sheet Morphology and 3D Droplet Distribution of Aviation Kerosene Pressure-Swirl Spray with Digital Off-Axis Holography

High-Fidelity Multi-Scale Simulation of Swirled Air-blast Atomization with Comparison against Experiments

Numerical Models For Viscoelastic Liquid Atomization Spray

Multi-Objective Optimization of Three-Phase Jet Fire Monitor Nozzle Based on Kriging and NSGA-II

Characterization of the binding of rat liver ribosomal proteins L6, L7, and L19 to 5 S ribosomal ribonucleic acid.

Multi-Objective Parameter Optimized Design of Self-Oscillating Cavitation Jet Nozzles

The effect of nozzle internal flow on spray atomization

Numerical and experimental study of the effects of tangential to axial velocity ratio and structural parameters inside the nozzle on spray characteristics

Structure optimization of submerged water jet cavitating nozzle with a hybrid algorithm

Hybrid Eulerian-Lagrangian simulations of liquid jet atomization in swirling cross flow