Abstract:The binary perovskite-type compound (1 − x )BiFeO 3 – x BaTiO 3 (BF-BT) is considered as a promising high-temperature lead-free piezoelectric material due to its high Curie temperature ( T C > 400 °C) and better electromechanical properties. In this work, ternary lead-free piezoelectric ceramics with a chemical formula of (0.67 − x )BiFeO3–0.33BaTiO3– x Bi(Zn0.5Ti0.5)O 3 + 1 mol% MnO 2 (where x = 0–0.05) were prepared by the conventional solid-state reaction route. The effects of Bi(Zn 0.5 Ti 0.5 )O 3 introduction on the phase structures and microstructures, piezoelectric and dielectric properties, as well as impedance characteristics of BF-BT ceramics were investigated in detail. Firstly, all the samples synthesized exhibit a pure perovskite structure with the coexistence of rhombohedral ( R ) and tetragonal ( T ) phases, and the T phase content increases with increase in x . A small amount of Bi(Zn 0.5 Ti 0.5 )O 3 ( x ≤ 0.03) that were incorporated into the perovskite lattice of BF-BT can promote the grain growth of ceramics. Secondly, all samples were found with a notable relaxed phase transition behavior, T C of the system decreases with increase in x . The AC impedance spectra of the samples were fitted and analyzed according to the R-CPE equivalent circuit model, the electric impedance of the ceramics at high temperatures was mainly contributed by grain boundaries. Moreover, the dielectric relaxation activation energy of the samples firstly decreases and then increases with increase in x . Finally, the composition with x = 0.02 shows the optimized electrical properties among these samples, including T C = 454 °C, d 33 = 117 pC/N, k p = 23%, tan δ = 0.11, which are mainly benefited from the bismuth content compensation and the substitution of (Zn 0.5 Ti 0.5 ) 3+ for Fe 3+ at B-site reducing the valence change of Fe 3+ in BF-BT.

Significant Impact of TiO2 Purity on the Phase Structure and Electrical Properties of BiFeO3–BaTiO3 Lead‐free Piezoelectric Ceramics

Large electric‐field‐induced strain and enhanced piezoelectric constant in CuO‐modified BiFeO3‐BaTiO3 ceramics

Effects of Bi(Zn0.5Ti0.5)O3 introduction on the structures and electrical properties of BiFeO3–BaTiO3 lead-free piezoelectric ceramics

Investigation of BiFeO3-BaTiO3 Lead-Free Piezoelectric Ceramics with Nonstoichiometric Bismuth

Phase transition and electrical properties of Ba 0.7 Ca 0.3 TiO 3- BiFeO 3 ceramics

Investigation of Lead-Free BiFeO3–BaTiO3 Piezoelectric Ceramics Through Precise Composition Control

Effects of Bi(Zn0.5Zr0.5)O3 Addition on the Structure and Electric Properties of BaTiO3 Lead-Free Piezoelectric Ceramics

Effect of Dy2O3 on the Structure and Electrical Properties of (bi0.5na0.5)0.94ba0.06tio3 Lead-Free Piezoelectric Ceramics

Phase Transition, Microstructure and Electrical Properties of Fe Doped Ba0.70Ca0.30TiO3 Lead-Free Piezoelectric Ceramics

Relationship between chemical composition, phase structure and piezoelectric property of BiFeO3–BaTiO3 ceramics near morphotropic phase boundary

Effects of Fe2O3 doping on the electrical properties of Na0.47Bi0.47Ba0.06TiO3 lead-free ceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Effects of Ti nonstoichiometry on microstructure, dielectric, ferroelectric and piezoelectric properties of (Na0.54Bi0.5)(0.94)Ba0.06Ti1+xO3 lead-free ceramics

Effect of BaTiO3 Particles with Different Shape on Electrical Properties of (bi0.5na0.5)tio3 Piezoceramics

Microstructure, dielectric and piezoelectric properties of BiFeO3‐SrTiO3 lead‐free ceramics

High Depolarization Temperature and Superior Piezoelectric Performance with Complex Structural Evolution in BiFeO3PbTiO3–(Sr0.7Bi0.2□0.1)TiO3 Systems

Correlation between phase, microstructure and electrical properties of Ba0.7Sr0.3TiO3-modified Bi0.5Na0.5TiO3-0.06BaTiO3 lead free ceramics

Excellent Thermal Stability and Enhanced Piezoelectric Performance of Bi(Ni2/3Nb1/3)O3-modified BiFeO3-BaTiO3 Ceramics

Dielectric, Ferroelectric, and Piezoelectric Properties of BiFeO3–BaTiO3 Ceramics

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Lead-Free BiFeO3-BaTiO3 Ceramics with High Curie Temperature: Fine Compositional Tuning Across the Phase Boundary for High Piezoelectric Charge and Strain Coefficients.