Abstract:Purpose The purpose of this paper is to supplement and upgrade existing research on LPBF of NiTi alloys. Laser powder bed fusion (LPBF) is a promising method for fabricating nickel-titanium (Ni-Ti) alloys. It is well known that the energy density is mainly adjusted through the scanning speed and laser power. Nevertheless, there is lack in research on the effects of separately adjusting the scanning speed and laser power on the properties of the final Ni-Ti components. On the other hand, although Ni-rich Ni-Ti alloys [such as Ni54(at.%)Ti] have great potential in structural applications because of their high hardness and good shape stability, at present, there are few studies focusing on this grade of Ni-Ti alloy. Design/methodology/approach In this work, the energy density was adjusted by changing the laser power and scanning speed separately, and the corresponding process parameters were used to fabricate Ni54(at.%)Ti alloys. The formability (including the relative density, impurity content, etc.) and tensile properties of the LPBF Ni54(at.%)Ti alloys fabricated with different combinations of process parameters were analyzed. Findings The effects of increasing the laser power and reducing the scanning speed on the properties of the LPBF Ni54(at.%)Ti alloys and the property differences between components manufactured with different combinations of laser power and scanning speed under the same energy density were analyzed. The optimal process parameters were selected to fabricate the components that achieved the highest ultimate tensile strength of 537 MPa, a high relative density of 98.23%, a relatively low impurity content (0.073 Wt.% of carbon and 0.06 Wt.% of oxygen) and an ideal pseudoelasticity (95% recovery rate loaded at 300 MPa). Originality/value The effects of increasing the laser power and reducing the scanning speed on the properties of LPBF Ni54(at.%)Ti alloys were studied in this paper. This work is an upgrade and supplement to the existing research on fabricating Ni-rich Ni-Ti alloys by the LPBF method.

Heat Transfer Mode Shift for Regulating Microstructure of NiTi Alloys in Laser Powder Bed Fusion

Fabrication of multi-functional Ni–Ti alloys by laser powder bed fusion

Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion

Controlling the Crystal Texture and Microstructure of NiTi Alloy by Adjusting the Thermal Gradient of Laser Powder Bed Melting

Regulation of Microstructure, Phase Transformation Behavior, and Enhanced High Superelastic Cycling Stability in Laser Direct Energy Deposition NiTi Shape Memory Alloys Via Aging Treatment

Micro laser powder bed fusion of NiTi alloys with superior mechanical property and shape recovery function

Machine learning in additive manufacturing——NiTi alloy's transformation behavior

Selective Laser Melting of Pre-Alloyed NiTi Powder: Single-Track Study and FE Modeling with Heat Source Calibration

Anisotropy in Microstructural Features and Tensile Performance of Laser Powder Bed Fusion NiTi Alloys

Formation Mechanism of Heterogeneous Microstructures and Shape Memory Effect in NiTi Shape Memory Alloy Fabricated Via Laser Powder Bed Fusion

Enhancing Thermal Stability of Laser Powder Bed Fusion Fabricated 60niti Alloy Via Nb Alloying

Effect of laser emission mode on processability map, microstructure and martensitic transformation of Shape Memory NiTi alloy produced by laser powder bed fusion

Effect of microstructure on the superelasticity of high-relative-density Ni-rich NiTi alloys fabricated by laser powder bed fusion

Molecular Dynamics Simulation of NiTi Shape Memory Alloys Produced by Laser Powder Bed Fusion: Laser Parameters on Phase Transformation Behavior

Controlling microstructure evolution and phase transformation behavior in additive manufacturing of nitinol shape memory alloys by tuning hatch distance

Influence of Nb addition and process parameters on the microstructure and phase transformation behavior of NiTiNb ternary shape memory alloys fabricated by laser powder bed fusion

Strengthening Mechanism and Micropillar Analysis of High-Strength NiTi–Nb Eutectic-Type Alloy Prepared by Laser Powder Bed Fusion

Microstructure and Phase Transformation Temperature of NiTiNb Shape Memory Alloy Prepared by Laser Solid Forming Using Mixed Powder

A Functionally Gradient NiTi Shape-Memory Alloy Fabricated by Selective Laser Melting

In-situ alloying of NiTiNb ternary shape memory alloys via laser powder bed fusion using pre-alloyed NiTi and elemental Nb powders: Microstructure, phase transformation behavior and functional properties

Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion