Abstract:(BaTiO3–SrTiO3)/(WO3)x ceramics with x = 0 up to 5% were synthesized using solid-state reaction via high-energy ballf milling technique. Various characterization techniques were used including X-ray powder diffraction (XRD), scanning electron microscope (SEM), Fourier transform-infrared spectroscopy (FT-IR), and UV–visible diffuse reflectance (DR) spectrophotometer. Structural analysis via XRD indicates the formation of two separate phases of SrTiO3 (STO) and BaTiO3 (BTO) having both cubic structures. The presence of BaWO4 as impurity was detected for higher concentration. SEM observations show a reduction in the average grains size with increasing WO3 addition. In comparison with free-added ceramic, the optical band gap energy (Eg) shows a slight increase with WO3 addition. Contextual investigations on the electrical and dielectric properties of various WO3 added to BTO–STO ceramics have been used to evaluate conductivity (\(\sigma\)), dielectric constant and loss (\(\varepsilon^{\prime}_{r}\) and \(\varepsilon^{\prime\prime}_{r}\)), and dissipation factor (\(\mathrm{t}\mathrm{a}\mathrm{n}\delta\)) against both frequency and dc bias voltages. Generally, both \(\sigma\) and \(\varepsilon^{\prime\prime}_{r}\) correspond to the tendency of the power law to frequency. However, dc bias has been noticed to be lesser affecting the conduction mechanisms, which has a small variation for various WO3 addition ratios. In addition, the dissipation factor was found to be highly dependent on both the addition ratio and the frequency as well as dc bias applied.

Dramatic Impact of Raw Chemicals on the Electrical Properties of SrTiO3 Ceramics

Structure, Dielectric Behaviours, Enhanced Polarization Responses and Energy Storage Properties in (1 − X )srtio 3 – X Bi(Mg 1/2 Ti 1/2 )O 3 Ceramics

The Effect of B2o3-Li2co3 Addition on Sintering Behavior and Dielectric Properties of Ba0.6sr0.4tio3 Ceramics

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Microwave Dielectric Properties And Thermally Stimulated Depolarization Currents Study Of (1-X)Ba0.6sr0.4la4ti4o15-Xtio(2) Ceramics

Synthesis and characterization of (sm, Al) co-doped SrTiO3 with giant dielectric constant and low dielectric loss through defect engineering design

Phase Structure, Bond Features, and Microwave Dielectric Characteristics of Ruddlesden–Popper Type Sr2TiO4 Ceramics

High Insulation Resistivity and Ultralow Dielectric Loss in La-Doped SrTiO3 Colossal Permittivity Ceramics through Defect Chemistry Optimization

Role of WO3 nanoparticles in electrical and dielectric properties of BaTiO3–SrTiO3 ceramics

Ultrahigh insulation resistivity potential under colossal permittivity SrTiO 3 based ceramics via controlling oxygen backfill

Effects of CaO and La2O3 doping of (Zr0.8Sn0.2)TiO4 ceramics on the densifying behavior and microwave dielectric properties

Effects of MgO, SrO and La$lt;inf$gt;2$lt;/inf$gt;O$lt;inf$gt;3$lt;/inf$gt; Co-doping on Structure and Properties of (Zr$lt;inf$gt;0.8$lt;/inf$gt;Sn$lt;inf$gt;0.2$lt;/inf$gt;)TiO$lt;inf$gt;4$lt;/inf$gt; Ceramics

Some Unusual Behavior of Dielectric Properties of SrTiO3 Metal Organic Chemical Vapor Deposition Grown Thin Films

Relationships between dielectric properties of SrTiO3 ceramics and the contacts of electrode/STO surface

The Effect of Different Oxides on Ba0.sSr0.5TiO3 Bulk Ceramics

Oxygen-Vacancy-Related High-Temperature Dielectric Relaxation In Srtio3 Ceramics

Relationship between dielectric properties and grain size for ceramic SrTiO3 grain boundary layer capacitor

Enhanced dielectric breakdown strength and ultra-fast discharge performance of novel SrTiO3 based ceramics system

Strontium doped CaCu3Ti4O12 ceramics with very low dielectric loss synthesized by the sol–gel method

Dielectric Properties of Ba0.6Sr0.4TiO3 Ceramic Doped with LaAlO3

Recent Development in the Preparation of Strontium Titanate Ceramic Materials