Abstract:Compared to organic-inorganic halide perovskites (e.g., MAPbBr(3) and FAPbBr(3)), all-inorganic CsPbBr3 perovskite has shown to be a more promising candidate for application in light-emitting diodes (LEDs) due to higher photoluminescence quantum efficiency and thermal stability. Yet, the external quantum efficiency (EQE) of polycrystalline (3D) CsPbBr3 based PeLEDs needs further improvement. The low efficiency was attributed to severe luminescence quenching at PEDOT:PSS (Poly-(3,4-ethylenedioxythiophene):poly(styrenesulfonate))/ CsPbBr3 interface arising from (i) interfacial energy barrier between PEDOT:PSS and CsPbBr3 layer, (ii) poor crystallization and large pinholes in perovskite film, and (iii) indium fin oxide (ITO) anode etching due to PEDOT:PSS acidity. Therefore, it is necessary to address all these problems simultaneously to reduce the luminescence quenching and to improve device efficiency. Here, we introduce a feasible approach to modify the PEDOT:PSS layer in order to reduce the luminescence quenching at PEDOT:PSS/CsPbBr3 interface. In this modification, PEDOT:PSS is mixed with a MoO3 ammonia solution at desired volume ratios. Our studies demonstrate that upon this treatment, not only hole injection and crystallization of perovskite film are improved but also ITO is protected from etching by the acidic nature of PEDOT:PSS. This modification result in a high performance all inorganic CsPbBr3 LED with a maximum luminance of similar to 34420 cd/m(2) and a current efficiency of similar to 7.30 cd/A. In addition, our state-of-the-art perovskite LEDs (PeLEDs) exhibit no degradation after 2 h of continuous operation, representing a stable PeLEDs based on one-step solution processed polycrystalline CsPbBr3.

Efficient Perovskite Light-Emitting Diodes Achieved by Suppressing the Acidic Surface of PEDOT:PSS Films

Conjugated Polyelectrolytes as Efficient Hole Transport Layers in Perovskite Light-Emitting Diodes.

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Modification of PEDOT: PSS to Enhance Device Efficiency and Stability of the Quasi-2D Perovskite Light-Emitting Diodes

Towards Efficient Perovskite Light-Emitting Diodes: A Multi-Step Spin-Coating Method for a Dense and Uniform Perovskite Film

Perovskite-molecule Composite Thin Films for Efficient and Stable Light-Emitting Diodes.

Interfacial Engineering With Ultrathin Poly (9,9-Di-N-Octylfluorenyl-2,7-Diyl) (Pfo) Layer For High Efficient Perovskite Light-Emitting Diodes

Improved Efficiency for Silicon‐Based Perovskite Light‐Emitting Diodes Via Interfacial Hydrophilic Modification

Boosting the Efficiency and Stability of Perovskite Light-Emitting Devices by a 3-Amino-1-propanol-Tailored PEDOT:PSS Hole Transport Layer

Modification of Interface Between PEDOT:PSS and Perovskite Film Inserting an Ultrathin LiF Layer for Enhancing Efficiency of Perovskite Light-Emitting Diodes

Performance Enhancement of Perovskite Quantum Dot Light-Emitting Diodes via Management of Hole Injection

Gaining Insight into the Underlayer Treatment for In Situ Fabrication of Efficient Perovskite Nanocrystals Based Light-Emitting Diodes

Acid Doping of PEDOT:PSS Strengthens Interfacial Compatibility Toward Efficient and Stable Perovskite Solar Cells

Solving the Contradiction of Work Function and Conductivity in PEDOT:PSS to Achieve High‐Performance Perovskite Light‐Emitting Diode via Aniline Interface Modification

High Performance and Stable All-Inorganic Perovskite Light Emitting Diodes by Reducing Luminescence Quenching at PEDOT:PSS/Perovskites Interface

Modified Conducting Polymer Hole Injection Layer for High-Efficiency Perovskite Light-Emitting Devices: Enhanced Hole Injection and Reduced Luminescence Quenching.

All-solution Preparation of Perovskite Light-Emitting Diodes in Ambient Air Through Film-forming Regulation of Light-emitting Layers Based on Dual-additive Doping and Oxygen Plasma Treatment

Efficient Perovskite Light-Emitting Diodes with Chemically Bonded Contact and Regulated Charge Behavior.

Interface Engineering of a Compatible PEDOT Derivative Bilayer for High‐Performance Inverted Perovskite Solar Cells

A Cost-Effective Strategy to Modify the Electrical Properties of PEDOT:PSS via Femtosecond Laser Irradiation

Alkali Cations Modified Poly(styrene Sulfonate) Enabling Interfacial Band Structure Regulation for Efficient True-Blue Perovskite Light-Emitting Diodes