Abstract:Reactive dyes, widely applied in the textile industry for their vibrant colors, excellent fastness, and ease of application. Their presence poses multifaceted threats to aquatic ecosystems and health risks, including skin irritation, allergic reactions, respiratory problems, and increased cancer risk. In response to these challenges, this study explores the potential of acid-activated red mud, an industrial solid waste by-product from the aluminum industry, as an economical adsorbent for the removal of commercial reactive dyes from industrial wastewater. The robustness of the employed Box-Behnken design is evidenced by the high determination coefficient (0.997) and correlation coefficient (0.994) values. The optimum acid activation condition was determined to be 385 K activation temperature, 91 min activation time, and 2.5 N HCl acid concentration, resulting in a 99.24 ± 0.04 % removal efficiency for reactive dyes. Analysis of X-ray Diffraction and X-ray Fluorescence data revealed that the activation process significantly increased the composition of Al and Fe compounds. This enhancement was achieved by eliminating compounds that block active sites and improves the overall surface area from 37.35 m2/g to 173.81 m2/g. Detailed morphological analysis, conducted through high-resolution transmission electron microscopy and scanning electron microscopy, reveals profound transformation in the surface structure. The study primarily focuses on removing four commercial reactive dyes: Reactive Blue 2 (RBL-2), Reactive Black 5 (RBK-5), Reactive Red 24 (RR-24), and Reactive Yellow 15 (RY-15). These dyes demonstrate maximum adsorption capacities of 118.24 mg/g, 121.02 mg/g, 129.19 mg/g, and 142.64 mg/g, respectively. In order to comprehend the interactions between dye molecules and the adsorbent, a first principle based model was employed to simulate the adsorption kinetics.

Remarkable Purification of Organic Dyes by NiOOH-modified Industrial Waste Residues

An integrated strategy for ultra-efficient recovery and sustainable reuse of Congo red from wastewater

A Strategy-Purifying Wastewater with Waste Materials: Zn2+ Modified Waste Red Mud As Recoverable Adsorbents with an Enhanced Removal Capacity of Congo Red

A strategy-purifying wastewater with waste materials: Zn 2+ modified waste red mud as recoverable adsorbents with an enhanced removal capacity of congo red

Surface Oxidized Nano-Cobalt Wrapped By Nitrogen-Doped Carbon Nanotubes For Efficient Purification Of Organic Wastewater

Synthesis of Ce–Ni/sepiolite with Excellent Adsorption and Catalytic Oxidation Performance Toward Dyes

Highly Efficient Removal Of Organic Dyes From Waste Water Using Hierarchical Nio Spheres With High Surface Area

CRAB SHELL: A POTENTIAL HIGH-EFFICIENCY AND LOW-COST ADSORBENT FOR DYE WASTEWATER

Fabrication of nickel-iron layered double hydroxides using nickel plating wastewater via electrocoagulation, and its use for efficient dye removal

Preparation of Reusable Porous Carbon Nanofibers from Oxidized Coal Liquefaction Residue for Efficient Adsorption in Water Treatment

Efficient Removal of Organic Pollutants on Sponge-Type Inorganic Adsorbent Derived from Spent Cotton Fiber/layered Double Hydroxides

Efficient removal of refractory dyestuffs from textile wastewater by composite hydrated alumina derived from waste aluminum polishing solution

A review on modified red mud-based materials in removing organic dyes from wastewater:Application, mechanisms and perspectives

Waste to wealth: Facile activation of red mud waste and insights into industrial reactive dye removal from wastewater

Optimization of hydrothermal synthesis conditions of Bidens pilosa-derived NiFe2O4@AC for dye adsorption using response surface methodology and Box-Behnken design

NiFe-LDH nanosheet/carbon fiber nanocomposite with enhanced anionic dye adsorption performance

Trace nitrogen-doped hierarchical porous biochar nanospheres: Waste corn roots derived superior adsorbents for high concentration single and mixed organic dyes removal

High-concentration Organic Dye Removal Using Fe2O3.3.9MoO(3) Nanowires As Fenton-like Catalystst

NiO(111) nanosheets as efficient and recyclable adsorbents for dye pollutant removal from wastewater

Study on the Adsorption Properties of Oxalic Acid-Modified Cordierite Honeycomb Ceramics for Neutral Red Dyes

Efficient and sustainable treatment of anionic dye wastewaters using porous cationic diatomite