Abstract:Pressure-swing distillation (PSD) is an alternative configuration used to separate pressure-sensitive azeotropes and avoid product contamination(s) in extractive or heterogeneous azeotropic distillation via the entrainer(s). Full heat integration between high- and low-pressure columns (HPC and LPC) can provide significant energy savings compared to the conventional case, while it also loses the control degree of freedom, trim condenser or reboiler heat load, via the integrated condenser/reboiler exchanger. Typically, the pressure of HPC is left uncontrolled, and additional pressure-compensated control strategies are implemented, which may create safety issues. To address this, the study proposes adding an auxiliary cooling-water-driven condenser to the fully heat-integrated PSD system, providing an extra manipulated variable to regulate the pressure of HPC. Compared to the conventional PSD system, the new modified process could achieve a 26.31% reduction in total annual cost. The research uses the maximum-boiling azeotropic mixture of acetone/chloroform as a case study which makes the distillation system characterized by high reflux ratios and a large recycle flow rate, leading to the unwelcome snowball effect. To achieve effective process control, robust control structures are proposed that rigorously regulate the pressure of the column by manipulating the heat removal in the trim condenser, attenuating or eliminating potential overpressure issues. Product purity and other evaluation indicators, such as product transient deviations, offsets, integral absolute error, and oscillation degrees, are also considered. Results show that the proposed control schemes can efficiently control the pressure of HPC, weaken the snowball effect, and maintain product purity. This study highlights the importance of pressure control for fully heat-integrated PSD systems, particularly for pressure-sensitive azeotropes with small pressure-induced shifts.

Pressure-driven batch distillation optimal control for acetone-methanol separation

Dynamic Simulation and Control schemes of hybrid membrane-distillation process on ethylene- ethane system

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Design and Control of Dimethyl Carbonate–Methanol Separation Via Pressure-Swing Distillation

Exploration of the Effects of Pressure on the Controllability of Extractive Distillation for Separating Pressure-Sensitive Azeotropes

Towards a comprehensive approach to optimal control of non-ideal binary batch distillation

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Reaction-assisted Separation of Acetone from the Azeotrope of Methanol and Acetone

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

A simulation study on selection of optimized process for azeotropic separation of methanol and benzene: Internal heat integration and economic analysis

Control structure selection of increased‐pressure extractive distillation process for DMC‐MeOH azeotropic mixture

Control of fully heat-integrated pressure-swing distillation with strict pressure manipulation: A case study of separating a maximum-boiling azeotrope with small pressure-induced shift

Process Design and Multi-Objective Optimization for Separation of Ternary Mixtures with Double Azeotropes Via Integrated Quasi-Continuous Pressure-Swing Batch Distillation

Process Design and Multi-Objective Optimization of Efficient Heat Utilization Distillation Based on the Influence of Pressure and Entrainer Flow on Separation Performance

Design and Control of a Fully Heat-Integrated Pressure-Swing Azeotropic Distillation System

Effect of Solvent Flow Rates on Controllability of Extractive Distillation for Separating Binary Azeotropic Mixture

Optimization of Pre-Concentration, Entrainer Recycle and Pressure Selection for the Extractive Distillation of Acetonitrile-Water with Ethylene Glycol

Comparison of alternative methods for methyl acetate + methanol + acetic acid + acetic anhydride mixture separation

Vapor-Liquid Equilibria and Conceptual Design of Extractive Distillation for Separating Ethanol and Ethyl Propionate

Control of side-stream pressure-swing distillation and extractive distillation for separating azeotropic mixture of cyclohexane and acetone

A Study of the Pressure Effect on the Relative Volatility of the Components in the Distillation Process of Mixtures of Different Natures