Controlled Synthesis of Triazole Polymers Via Atrp/Click Chemistry Reaction and Preparation of Their Self-Assembled Film Against Copper Corrosion

Jin Li,M. Wang,Fang Ye,Caichao Zhu,Da Quan Zhang,Jie Luo

DOI: https://doi.org/10.2139/ssrn.4691299

2024-01-01

Abstract:Download This Paper Open PDF in Browser Add Paper to My Library Share: Permalink Using these links will ensure access to this page indefinitely Copy URL Copy DOI

What problem does this paper attempt to address?

Improvement on Stability of Polymeric Latexes Prepared by Emulsion Atrp Through Copper Removal Using Electrolysis

Yipeng Wei,Qi Zhang,Wen-Jun Wang,Bo-Geng Li,Shiping Zhu

DOI: https://doi.org/10.1016/j.polymer.2016.07.088

IF: 4.6

2016-01-01

Polymer

Abstract:Copper contamination results in poor stability and limited application of latexes generated using emulsion ATRP. This work describes an electrolysis method, which provides for the removal of copper from such latexes, while preserving colloidal stability and latex particle integrity. Polyacrylate latexes were synthesized via emulsion polymerization with reverse ATRP. The reaction was mediated by CuCl2/ 4,4-di-(5-nonyl)-2,2'-bipyridine (dNbpy) and stabilized with a combined surfactant system of Brij-98 and a new surfactant-ligand (SL) design, which provides for the capture Cu species residing at the interface of latex particles. It is shown that > 98% of the residual Cu was removed after 14-h of electrolysis at a voltage of 3 V, and > 99% Cu removal was achieved after 7-h treatment at 9 V. For comparison, a Cu removal of < 50% was measured in polyacrylate latexes prepared by emulsion ATRP using dNbpy as a sole ligand. The removal of Cu using this process is shown to be rapid and efficient and provide for a substantial increase in latex stability and weather resistance of polymers. (C) 2016 Elsevier Ltd. All rights reserved.
In-situ preparation of triazole polymerization films on copper surface via SI-ATRP method and their performance against copper corrosion

Chun-ping Li,Cai-chao Zhu,Meng-wu Wang,Fang Ye,Jin Li,Da-quan Zhang

DOI: https://doi.org/10.1016/j.jmrt.2023.11.053

IF: 6.267

2023-11-11

Journal of Materials Research and Technology

Abstract:As one of the most advanced film forming technologies, the surface-initiated controlled/living radical polymerization provides an effective method for in-situ fabricating functional films on material surface. In this paper, the triazole film of polymerized (1-tosyl-1H-1,2,3-triazol-4-yl) methyl acrylate (P-TTMA) is in-situ prepared on copper surface via Cu catalyzed surface-initiated atom transfer radical polymerization (SI-ATRP) method. The P-TTMA film with different degree of polymerization (DP) is obtained by varying its molecular weight, which is achieved via regulating the polymerization time of SI-ATRP reaction. When the polymerization time is within 48 h, the SI-ATRP system can achieve a regular chain growth of P-TTMA film, the DP value of P-TTMA film shows an S-shaped variation as the polymerization time increasing. The electrochemical test is performed to evaluate the anticorrosion performance of different P-TTMA films for copper. The result demonstrates that the P-TTMA films exhibit good anticorrosion performance for Cu in 3.5 wt% NaCl solution. The P-TTMA obtained by 48 h polymerization time, with the DP value of 105, exhibits the stable and good protection performance. The anticorrosion performance of P-TTMA film can be optimized via regulating the SI-ATRP reaction. This paper provides a new idea for preparing inhibition film with a certain degree of polymerization and protection performance on metal surface. It is expected to be a theoretical guidance for fabricating triazole polymer film using ATRP with lower catalyst loading or metal-free ATRP in the coming future.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Thiol-Yne Click Polymerization: Regio- And Stereoselective Synthesis Of Sulfur-Rich Acetylenic Polymers With Controllable Chain Conformations And Tunable Optical Properties

Jianzhao Liu,Jacky Lam,Cathy Ka Wai Jim,Jason C Y Ng,Jianbing Shi,Huimin Su,Kwok Fai Yeung,Yuning Hong,Mahtab Faisal,Yong Yu,Kamsing Wong,Benzhong Tang

DOI: https://doi.org/10.1021/ma1023473

IF: 5.5

2011-01-01

Macromolecules

Abstract:The atom-economical alkyne polyhydrothiolations of aromatic diynes (1) and dithiol (2) catalyzed by rhodium complexes proceed smoothly under mild conditions at room temperature in a regioselective manner, producing sole anti-Markovnikov products of poly(vinylene sulfide)s (3) with high molecular weights (M-w up to 31500) and stereoregularities (E content up to 100%) in high yields (up to 95.2%). The stereostructures of the polymers are readily tuned by engineering control on the sequential addition of monomers during the polymerization process and postmanipulation by light irradiation. All the poly(vinylene sulfide)s are soluble in common organic solvents and exhibit good film-forming ability and high optical transparency. The functional pendants in 1 have endowed 3 with novel properties such as aggregation-enhanced emission characteristics, optical limiting to harsh laser pulses, and ceramization capability to semiconducting nanoparticles. The polymers are thermal and UV curable, enabling the fabrication of fluorescent photopatterns. Their thin films show high refractive indices (n(D) = 1.75-1.70) and low optical dispersions (down to 0.006) at telecom important wavelengths. Their refractive indices vary with their stereostructures and can be modulated by UV irradiation.
Metal-free click polymerizations of activated azide and alkynes

Qiang Wang,Hongkun Li,Qiang Wei,Jingzhi Sun,Jianfeng Wang,Xiao A. Zhang,Anjun Qin,Benzhong Tang

DOI: https://doi.org/10.1039/c2py20797d

IF: 4.6

2013-01-01

Polymer Chemistry

Abstract:The Cu(I)-catalyzed azide-alkyne click polymerization has become a powerful tool for the preparation of functional polytriazoles. However, copper residues in the products could harm the performance of optoelectronic devices and be cytotoxic in biological applications. The complete removal of these residues after reaction from the polymers is therefore necessary but difficult. The metal-free azide-alkyne click polymerization (MFCP) provides a solution to this problem. Currently, the MFCP is facilitated by activated alkynes, and no activated comonomer, i.e. azide, has been reported. In this paper, an activated azide, 4,4'-diazidoperfluorobenzophenone , was designed and synthesized. Compared to the ordinary azide, such a monomer can remarkably accelerate the MFCP with alkynes. Thus, a new MFCP of activated azide and alkyne was established, and polytriazoles with high regioregularity (fraction of 1,4-isomer higher than 82%) and satisfactory molecular weights (M-w up to 34 000) were produced in high yields (up to 95.1%).
Surface-initiated atom transfer radical polymerization of triazole monomer from copper surface and its anticorrosion performance

Jin Li,Mengwu Wang,Fang Ye,Chunping Li,Daquan Zhang

DOI: https://doi.org/10.1016/j.electacta.2024.143947

IF: 6.6

2024-03-01

Electrochimica Acta

Abstract:Triazole compounds are the special corrosion inhibitors for copper and its alloys. The degree of polymerization of triazole molecules is a critical factor determining their anticorrosion performance. Surface-initiated atom transfer radical polymerization (SI-ATRP) is a robust method for preparing the polymer films with controlled conformation on material surface. In this work, the triazole film of polymerized (1-tosyl-1H-1,2,3-triazol-4-yl) methyl acrylate (P-TTMA) is in-situ prepared on copper surface via Cu catalyzed surface-initiated atom transfer radical polymerization (SI-ATRP) method. The P-TTMA film with different anticorrosion performance is obtained by regulating their conformation (graft density, degree of polymerization). The conformation of P-TTMA is achieved by varying the assembling concentration of the initiator in SI-ATRP reaction. When the assembling concentration of the initiator ranges from 0.05 wt% to 1.00 wt%, the P-TTMA exhibits different graft density and degree of polymerization, the conformation of P-TTMA polymer chains gradually changes from “mushroom-type” to “brush-type”. The electrochemical test is performed to evaluate the anticorrosion performance of different P-TTMA films for copper. The result demonstrates that the P-TTMA films exhibit good anticorrosion performance for Cu in 3.5 wt% NaCl solution. When the assembling concentration is 0.16 wt%, the P-TTMA film shows the best protection performance for copper and the corrosion inhibition efficiency is 97%. However, when the assembling concentration exceeds 0.16 wt%, the corrosion inhibition efficiency of P-TTMA film for copper decrease gradually. The anticorrosion performance of P-TTMA film can be optimized via regulating the assembling concentration of the initiator in SI-ATRP reaction. This work provides a novel idea for in-situ preparing triazole polymer films on copper surface and regulating their conformation via SI-ATRP method. It is of significance to design the multifunctional polymer film on material surface.

electrochemistry
A Recyclable and Reusable Supported Cu(I) Catalyzed Azide-Alkyne Click Polymerization.

Haiqiang Wu,Hongkun Li,Ryan T K Kwok,Engui Zhao,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1038/srep05107

IF: 4.6

2014-01-01

Scientific Reports

Abstract:The azide-alkyne click polymerization (AACP) has emerged as a powerful tool for the synthesis of functional polytriazoles. While, for the Cu(I)-catalyzed AACP, the removal of the catalytic Cu(I) species from the resulting polytriazoles is difficult, and the research on the recyclability and reusability of the catalyst remains intact. Herein, we reported the first example of using recyclable and reusable supported Cu(I) catalyst of CuI@A-21 for the AACP. CuI@A-21 could not only efficiently catalyze the AACP but also be reused for at least 4 cycles. Moreover, pronounced reduction of copper residues in the products was achieved. Apart from being a green and cost-effective polymer synthesis strategy, this method will also broaden the application of AACP in material and biological sciences and provide guidelines for other polymerizations with metal catalysts.
SYNTHESIS OF A HYPERBRANCHED POLY(AROYLARYLENE) CONTAINING TRIAZOLE AND FLUORENE FUNCTIONALITIES BY CLICK CHEMISTRY AND METAL-FREE,REGIOSELECTIVE POLYCYCLOTRIMERIZATION

An-jun Qin,Cathy K. W. Jim,Jacky W. Y. Lam,Jing-zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1142/s0256767909003765

2009-01-01

Chinese Journal of Polymer Science

Abstract:A new bis(aroylacetylene) containing triazole and fluorene moieties is synthesized by click chemistry. Polycyclotrimerization of the monomer is catalyzed by piperidine in refluxed dioxane, furnishing a regioregular poly(aroylarylene) in a satisfactory yield. The hyperbranched structure of the polymer is characterized spectroscopically with satisfactory results. The polymer enjoys no metal detriment and is soluble in common organic solvents such as tetrahydrofuran (THF), chloroform, dichloromethane (DCM), and N,N-dimethylformamide (DMF).
Click Synthesis of Triazole Polymers Based on Lignin-Derived Metabolic Intermediate and Their Strong Adhesive Properties to Cu Plate

Yijie Jin,Manjusha Joshi,Takuma Araki,Naofumi Kamimura,Eiji Masai,Masaya Nakamura,Tsuyoshi Michinobu

DOI: https://doi.org/10.3390/polym15061349

2023-03-08

Abstract:2-Pyrone-4,6-dicarboxylic acid (PDC) is a chemically stable metabolic intermediate of lignin that can be produced on a large scale by transforming bacteria. Novel biomass-based polymers based on PDC were synthesized by Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) and fully characterized by nuclear magnetic resonance, infrared spectroscopies, thermal analysis, and tensile lap shear strength measurements. The onset decomposition temperatures of these PDC-based polymers were all above 200 °C. In addition, the PDC-based polymers exhibited strong adhesive properties to various metal plates, with the highest adhesion to a copper plate of 5.73 MPa. Interestingly, this result was in contrast to our previous findings that PDC-based polymers weakly adhere to copper. Furthermore, when bifunctional alkyne and azide monomers were polymerized in situ under hot-press conditions for 1 h, the resulting PDC-based polymer displayed a similar adhesion to a copper plate of 4.18 MPa. The high affinity of the triazole ring to copper ions improved the adhesive ability and selectivity of the PDC-based polymers to copper while still maintaining the strong adhesive ability to other metals, which is conducive to enhancing the versatility of PDC-based polymers as adhesives.
An Improved Approach to Prepare Triazole Protective Film by Click-Assembly on Copper Surface

Kai Zhang,Jiamin Lu,Jin Li,Daquan Zhang,Lixin Gao,Hao Zhou

DOI: https://doi.org/10.1016/j.corsci.2019.108352

IF: 7.72

2020-01-01

Corrosion Science

Abstract:Triazole (TTE) film is assembled on copper surface via click chemistry reaction between p-toluenesulfonyl azide (TA) and 3-butyne-1-ol (BTO). The mechanism of promoting the formation of TIM film by sodium thioacetate (STG) is investigated by electrochemical methods and surface analysis techniques. It shows STG coordinates with Cu(I) to avoid the salvation reaction of Cu(I) in aqueous solution. The STG-Cu(I) complex is an excellent catalyst for the click reaction between TA and BTO. The presence of STG promotes the click-assembly process on copper surface and improves the protection of TTE film against copper corrosion effectively.
One-pot Synthesis of Two New Copper(i) Coordination Polymers: in Situ Formation of Different Ligands from 4-Aminotriazole

Zhen-Guo Zhao,Rong-Min Yu,Xiao-Yuan Wu,Qi-Sheng Zhang,Yi-Ming Xie,Fei Wang,Seik Weng Ng,Can-Zhong Lu

DOI: https://doi.org/10.1039/b821491c

IF: 3.756

2009-01-01

CrystEngComm

Abstract:Two Cu4I4 coordination polymers, [Cu2I2(aadtz)](n) (1) and [Cu2I(dtz)](n) (2) [aadtz = 4-[(1-aminoethylidene)-amino]-3,5-diethyl-1,2,4-triazole, dtz = 3,5-diethyl-1,2,4-triazole], were synthesized in a one-pot reaction of CuI and 4-amino-3,5-diethyl-1,2,4-triazole under solvothermal conditions. The organic components were generated in situ from a common triazolate source. The structures of the Cu4I4 units in the polymers are different. The Cu4I4 cluster in complex 1 is an inorganic 8-membered ring with a chair-chair conformation, while the one in complex 2 is a distorted cubane. The topologies of the complexes were assigned as a two-dimensional 4-connected grid for 1 and a three-dimensional (3,4)-connected jph-type framework for 2. In addition, the luminescent properties of the complexes in the solid state were also investigated.
Anti-corrosion Performance of Covalent Layer-by-layer Assembled Films Via Click Chemistry Reaction on the Copper Surface

Daquan Zhang,Jiamin Lu,Cheng Shi,Kai Zhang,Jin Li,Lixin Gao

DOI: https://doi.org/10.1016/j.corsci.2020.109063

IF: 7.72

2021-01-01

Corrosion Science

Abstract:Constructing the films with remarkable anti-corrosion performance is the key issue to metal protection. A kind of covalent layer-by-layer (LbL) assembly films of triazole is fabricated on the copper surface in this work. The covalent LbL system provides a promising and efficient protection. The optimum assembly layers are three and the best protection efficiency is 96.9 %. Enhancement in corrosion resistance is due to the formation of the covalent triazole films via the click chemistry reaction catalysed by cuprous oxide. The mechanism of protection is discussed via the surface analysis and the molecular dynamics simulation.
The Role of Cuprous Ions on the Click-Assembled Triazole Films Against Copper Corrosion

Cheng Shi,Yizhen Wang,Yinzhe Yu,Jin Li,Daquan Zhang,Lixin Gao

DOI: https://doi.org/10.1016/j.corsci.2018.09.019

IF: 7.72

2018-01-01

Corrosion Science

Abstract:The click chemistry reaction between 2, 2-dimethylethynyl carbinol (MBY) and tosyl azide (TA) was used to form triazole films on copper surface. The effect of cuprous ions on the assembled films was investigated by the electrochemical measurements. The assembled films have the best protection efficiency of 93.8%. The attack of chloride ions gives out cuprous ions to catalyze the formation of compact triazole films. It shows that the assembled films have an anodic passivation role, and suppress the anodic corrosion reactions evidently. The role of cuprous ions on the films formation during the assembling process is discussed.
An air-stable supported Cu(І) catalyst for azide-alkyne click polymerization

Haiqiang Wu,Wenhui Dong,Zongtan Wang,Bicheng Yao,Ming Chen,Jingzhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-015-5475-x

2015-01-01

Abstract:An air-stable supported Cu(I) catalyst, CuI@PS-Phen, was designed and synthesized. CuI@PS-Phen can efficiently catalyze the click polymerization of diynes a and diazides b to produce soluble and thermally stable polytriazoles with high molecular weights ( M w up to 30800), and low copper residue content (down to 190 ppm) in high yields (up to 94.2%) under mild reaction conditions without the exclusion of oxygen.
Click-assembling Film Modified on Different Copper Substrates and Their Comprehensive Performance

Jin Li,Daquan Zhang,Cheng Shi,Lixin Gao,Yizhen Wang,Donghui Chen,Manhong Huang

DOI: https://doi.org/10.1016/j.apsusc.2019.06.232

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:A triazole (1-(p-tolylthio)-1H-1,2,3-triazole-4-carboxylic acid, TTC) film was prepared via an in-situ click-assembling reaction between tosyl azide (TA) and propiolic acid (PA) on Cu, Cu2O and CuO substrates. Its surface wettability, antibacterial activity and anticorrosion ability were evaluated by surface characterizations, antibacterial testing and electrochemical measurements. The modified-Cu2O film exhibits the best overall performance. The anticorrosion protection efficiency of the modified-Cu2O film for copper is 91.1%. The modified-Cu2O film shows a superior hydrophobicity with a contact angle of 137° and it also has the best antibacterial activity. The FT-IR and surface analysis (SEM and XPS) reveal that the excellent anticorrosion ability of the modified-Cu2O film is mainly due to the massive TTC film assembled on its surface. The large amount of TTC also contributes to the best hydrophobicity and antibacterial activity. The theoretical calculations show that the TTC film is formed via the horizontal adsorption of a triazole ring and O atoms in the TTC molecule.
Recyclable Cu nanoparticle catalyzed azide-alkyne click polymerization

Yizhao Chen,Benzhao He,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-019-9465-7

2019-01-01

Science China Chemistry

Abstract:The Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC) has been developed into a powerful polymerization reaction for the synthesis of new polytriazoles with versatile properties. However, research on recyclable and reusable copper catalyst for click polymerization to meet the requirement of green chemistry was rarely reported. Copper nanoparticles were reported to be capable catalysts for CuAAC. Replacing conventional copper catalyst with copper nanoparticles may realize the recycle and reuse of the copper catalyst in click polymerization. In this paper, copper nanoparticles were prepared and used as an effective catalyst for click polymerization, and soluble polytriazoles with high molecular weights were obtained in excellent yields under optimized reaction conditions. Importantly, the copper nanoparticles can be recycled and reused for up to 11 times for the click polymerization. Moreover, introducing aggregation-induced emission (AIE)-active moiety of tetraphenylethylene into the monomers makes the resultant polymers retain the AIE feature. This work not only provides an efficient recyclable catalytic system for the azide-alkyne click polymerization, but also might inspire polymer chemists to use recyclable copper species to catalyze other polymerizations.
Synthesis Of Sulfur-Containing Polyacetylenes And Fabrication Of Their Hybrids With Zno Nanoparticles

Haipeng Xu,Jia Ke Jin,Yu Mao,Jing Zhi Sun,Feng Yang,Wang Zhang Yuan,Yong Qiang Dong,Mang Wang,Ben Zhong Tang

DOI: https://doi.org/10.1021/ma702337z

IF: 5.5

2008-01-01

Macromolecules

Abstract:It has been a challenge to synthesize thiol-functionalized polyacetylenes because of the poisoning effect of mercapto group on the early transition-metal catalysts. Rhodium complexes such as [Rh(cod)Cl](2) can catalyze the polymerizations but the products are insoluble and intractable. In this work, we tackled this challenge. Sulfur-containing polyacetylenes with macroscopic processability were successfully synthesized by separating thiol pendant from polyene backbone with a flexible spacer (in PI), capping free mercapto group with acetyl or alkyl group (in P2 or P3), and using a zwitterionic complex Rh+[eta(6)-C6H5(nbd)B-(C6H5)(3)] as catalyst. The soluble polymers were characterized by NMR, IR, UV, PL, and TGA analyses. Due to the specific interactions between thiol group and zinc cation, ZnO nanoparticles were chemisorbed onto the surfaces of polymer films, as verified by AFM analysis. Polymer P2 and ZnO nanoparticles could be readily hybridized by simply mixing the two components in an organic solvent such as chloroform, THF, or DMF. SEM images revealed that the morphology of the film cast from the solution of the P2/ZnO hybrid was dominated by well-dispersed nanoparticles and smooth surface.
The Polymeric Nanofilm of Triazinedithiolsilane Capable of Resisting Corrosion and Serving As an Activated Interface on a Copper Surface

Yabin Wang,Zhong Liu,Yaping Dong,Wu Li,Yudong Huang,Yutai Qi

DOI: https://doi.org/10.1039/c5ra19490c

IF: 4.036

2016-01-01

RSC Advances

Abstract:It seems self-contradictory that a copper surface can resist corrosion and be activated concurrently.
Hyperbranched Poly(aroxycarbonyltriazole)s: Metal-Free Click Polymerization, Light Refraction, Aggregation-Induced Emission, Explosive Detection, and Fluorescent Patterning

Hongkun Li,Haiqiang Wu,Engui Zhao,Jie Li,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/ma400609m

IF: 5.5

2013-01-01

Macromolecules

Abstract:The metal-free click polymerization (MFCP) of azide and alkyne has become a powerful tool for the synthesis of functional polytriazoles. Among which, the MFCP of propiolate and azide has been used to prepare functional linear poly(aroxycarbonyltriazole)s (PACTs). Their hyperbranched analogues, however, have been rarely prepared In this paper, hyperbranched PACTs with satisfactory molecular weights and high regioregularities were synthesized in high yields by the MFCP of tripropiolates (1) and tetraphenylethene (TPE)-containing diazide (2) under the optimized reaction conditions without protection from oxygen and moisture. The resultant polymers are soluble in common organic solvents and thermally stable, with 5% loss of their weights at temperatures higher than 330 degrees C. The polymers exhibit high refractive indices with low chromatic dispersion. Thanks to their contained TPE units, the polymers show the unique feature of aggregation induced emission, and their aggregates can function as fluorescent sensors for the detection of explosives with the superamplification quenching effect Furthermore, the polymers can be readily photo-cross-linked, yielding two-dimensional fluorescent patterns with high resolution.
Formation of Triazole Inhibitive Film on Copper Surface by Click Assembly in Presence of Cu2S Quantum Dots

Lixin Gao,Panpan Wu,Kai Zhang,Jin Li,Daquan Zhang

DOI: https://doi.org/10.1002/sia.6979

2021-01-01

Surface and Interface Analysis

Abstract:The triazole inhibitive film was assembled on copper surface via the click reaction between p‐toluenesulfonyl azide (TA) and propiolic acid (PA) in presence of Cu2S quantum dots (CuDs). The click‐assembled film on copper surface has good anticorrosion property in 3 wt.% NaCl solution. The best protective efficiency is 93.7%. The role of CuDs for the click assembly is investigated by the spectral analysis, electrochemical measurements, and surface morphology characterization. The Cu(I) in CuDs exhibited good thermodynamic stability and catalytic activity. During the assembly process, CuDs become the new interface of the click reaction and facilitate the formation of the triazole inhibitive film on copper surface.
Copper-Mediated Sequential C–N and N–N Bond Formation: Facile Synthesis of Symmetrical 1,2,4-Triazoles

Zhonglian Li,Zhiguo Zhang,Wei Zhang,Qingfeng Liu,Tongxin Liu,Guisheng Zhang

DOI: https://doi.org/10.1055/s-0033-1338985

2013-01-01

Synlett

Abstract:Via a one-pot process, catalyzed by Cu(OAc)(2), a series of 3,5-disubstituted 4H-1,2,4-triazoles was conveniently and efficiently synthesized by using low-toxicity, stable, readily available, inexpensive amidine hydrochloride.

Controlled Synthesis of Triazole Polymers Via Atrp/Click Chemistry Reaction and Preparation of Their Self-Assembled Film Against Copper Corrosion

Improvement on Stability of Polymeric Latexes Prepared by Emulsion Atrp Through Copper Removal Using Electrolysis

In-situ preparation of triazole polymerization films on copper surface via SI-ATRP method and their performance against copper corrosion

Thiol-Yne Click Polymerization: Regio- And Stereoselective Synthesis Of Sulfur-Rich Acetylenic Polymers With Controllable Chain Conformations And Tunable Optical Properties

Metal-free click polymerizations of activated azide and alkynes

Surface-initiated atom transfer radical polymerization of triazole monomer from copper surface and its anticorrosion performance

A Recyclable and Reusable Supported Cu(I) Catalyzed Azide-Alkyne Click Polymerization.

SYNTHESIS OF A HYPERBRANCHED POLY(AROYLARYLENE) CONTAINING TRIAZOLE AND FLUORENE FUNCTIONALITIES BY CLICK CHEMISTRY AND METAL-FREE,REGIOSELECTIVE POLYCYCLOTRIMERIZATION

Click Synthesis of Triazole Polymers Based on Lignin-Derived Metabolic Intermediate and Their Strong Adhesive Properties to Cu Plate

An Improved Approach to Prepare Triazole Protective Film by Click-Assembly on Copper Surface

One-pot Synthesis of Two New Copper(i) Coordination Polymers: in Situ Formation of Different Ligands from 4-Aminotriazole

Anti-corrosion Performance of Covalent Layer-by-layer Assembled Films Via Click Chemistry Reaction on the Copper Surface

The Role of Cuprous Ions on the Click-Assembled Triazole Films Against Copper Corrosion

An air-stable supported Cu(І) catalyst for azide-alkyne click polymerization

Click-assembling Film Modified on Different Copper Substrates and Their Comprehensive Performance

Recyclable Cu nanoparticle catalyzed azide-alkyne click polymerization

Synthesis Of Sulfur-Containing Polyacetylenes And Fabrication Of Their Hybrids With Zno Nanoparticles

The Polymeric Nanofilm of Triazinedithiolsilane Capable of Resisting Corrosion and Serving As an Activated Interface on a Copper Surface

Hyperbranched Poly(aroxycarbonyltriazole)s: Metal-Free Click Polymerization, Light Refraction, Aggregation-Induced Emission, Explosive Detection, and Fluorescent Patterning

Formation of Triazole Inhibitive Film on Copper Surface by Click Assembly in Presence of Cu2S Quantum Dots

Copper-Mediated Sequential C–N and N–N Bond Formation: Facile Synthesis of Symmetrical 1,2,4-Triazoles