Abstract:We report a new nBn photodetector (nBn-PD) design based on the InAlSb/AlSb/InAlSb/InAsSb material systems for mid-wavelength infrared (MWIR) applications. In this structure, delta-doped compositionally graded barrier (δ-DCGB) layers are suggested, the advantage of which is creation of a near zero valence band offset in nBn photodetectors. The design of the δ-DCGB nBn-PD device includes a 3 μm absorber layer (n-InAs 0.81 Sb 0.19 ), a unipolar barrier layer (AlSb), and 0.2 μm contact layer (n-InAs 0.81 Sb 0.19 ) as well as a 0.116 μm linear grading region (InAlSb) from the contact to the barrier layer and also from the barrier to the absorber layer. The analysis includes various dark current contributions, such as the Shockley–Read–Hall (SRH), trap-assisted tunneling (TAT), Auger, and Radiative recombination mechanisms, to acquire more precise results. Consequently, we show that the method used in the nBn device design leads to diffusion-limited dark current so that the dark current density is 2.596 × 10 −8 A/cm 2 at 150 K and a bias voltage of − 0.2 V. The proposed nBn detector exhibits a 50% cutoff wavelength of more than 5 μm, the peak current responsivity is 1.6 A/W at a wavelength of 4.5 μm and a − 0.2 V bias with 0.05 W/cm 2 backside illumination without anti-reflective coating. The maximum quantum efficiency at 4.5 μm is about 48.6%, and peak specific detectivity ( D *) is of 3.37 × 10 10 cm⋅Hz 1/2 /W. Next, to solve the reflection concern in this nBn devices, we use a BaF 2 anti-reflection coating layer due to its high transmittance in the MWIR window. It leads to an increase of almost 100% in the optical response metrics, such as the current responsivity, quantum efficiency, and detectivity, compared to the optical response without an anti-reflection coating layer.

Mid-wavelength Nbn Photodetector with High Operating Temperature and Low Dark Current Based on InAs/InAsSb Superlattice Absorber

Pbn Type Short-Wavelength Infrared Photodetector with an Ultralow Dark Current and Extended Wavelength Based on a Strained InGaAs/GaAsSb Superlattice.

MBE growth of mid-wavelength type II InAs/InAsSb superlattice photodetectors with wet etching and Al 2 O 3 passivation

Multistep InAs/InAsSb Staircase Nbn Long-Wavelength Infrared Detectors with Enhanced Charge Carrier Transport

Mid-Wave Infrared InAs/GaSb Type-II Superlattice Photodetector with N-B-p Design Grown on GaAs Substrate

High-Performance Midwave Type-II Superlattice Infrared Photodetectors With a Stepped InAs/GaSb Absorber

A Thermoelectrically Cooled nBn Type‐II Superlattices InAs/InAsSb/B‐AlAsSb Mid‐Wave Infrared Detector

Inas-Based Type-Ii Superlattice Long Wavelength Photodetectors

Low dark current Sb-based short-wavelength infrared photodetector

InP-based High-Performance Extended Short Wavelength P-B-n Infrared Photodetector with InGaAs/GaAsSb Type-Ii Superlattice Absorption Layer

Long and Very Long Wavelength InAs/InAsSb Superlattice Complementary Barrier Infrared Detectors

Molecular Beam Epitaxy Growth and Characteristics of the High Quantum Efficiency InAs/GaSb Type-Ii Superlattices MWIR Detector

Design and modeling of high-performance mid-wave infrared InAsSb-based nBn photodetector using barrier band engineering approaches

Mid-wavelength high operating temperature barrier infrared detector and focal plane array

High performance InAs0.91Sb0.09 MWIR detectors with an AlAs1-ySby graded barrier

Ultrahigh-performance superlattice mid-infrared nBn photodetectors at high operating temperatures

Mid-wavelength infrared InAs/GaSb type Ⅱ superlattice detectors

High Performance InAs/GaSb Superlattice Long Wavelength Photodetectors Based on Barrier Enhanced Structures

Theoretical Simulation of Extended Mid-Wave Infrared High Operating Temperature InSb Pbn Photodetectors

Infrared Al0.15InAsSb Digital Alloy Nbn Photodetectors

Long-Wavelength InAs/GaSb Superlattice Detectors With Low Dark Current Density Grown by MOCVD