Abstract:We report a new nBn photodetector (nBn-PD) design based on the InAlSb/AlSb/InAlSb/InAsSb material systems for mid-wavelength infrared (MWIR) applications. In this structure, delta-doped compositionally graded barrier (δ-DCGB) layers are suggested, the advantage of which is creation of a near zero valence band offset in nBn photodetectors. The design of the δ-DCGB nBn-PD device includes a 3 μm absorber layer (n-InAs 0.81 Sb 0.19 ), a unipolar barrier layer (AlSb), and 0.2 μm contact layer (n-InAs 0.81 Sb 0.19 ) as well as a 0.116 μm linear grading region (InAlSb) from the contact to the barrier layer and also from the barrier to the absorber layer. The analysis includes various dark current contributions, such as the Shockley–Read–Hall (SRH), trap-assisted tunneling (TAT), Auger, and Radiative recombination mechanisms, to acquire more precise results. Consequently, we show that the method used in the nBn device design leads to diffusion-limited dark current so that the dark current density is 2.596 × 10 −8 A/cm 2 at 150 K and a bias voltage of − 0.2 V. The proposed nBn detector exhibits a 50% cutoff wavelength of more than 5 μm, the peak current responsivity is 1.6 A/W at a wavelength of 4.5 μm and a − 0.2 V bias with 0.05 W/cm 2 backside illumination without anti-reflective coating. The maximum quantum efficiency at 4.5 μm is about 48.6%, and peak specific detectivity ( D *) is of 3.37 × 10 10 cm⋅Hz 1/2 /W. Next, to solve the reflection concern in this nBn devices, we use a BaF 2 anti-reflection coating layer due to its high transmittance in the MWIR window. It leads to an increase of almost 100% in the optical response metrics, such as the current responsivity, quantum efficiency, and detectivity, compared to the optical response without an anti-reflection coating layer.

Theoretical Simulation of Extended Mid-Wave Infrared High Operating Temperature InSb Pbn Photodetectors

Design of uncooled mid-wave infrared detectors based on lead selenide barrier structure

High performance InAs0.91Sb0.09 MWIR detectors with an AlAs1-ySby graded barrier

Design and modeling of high-performance mid-wave infrared InAsSb-based nBn photodetector using barrier band engineering approaches

High-Performance InAs1-xSbx Detector Based on AlAs1-ySby/AlSb Quantum Tunneling Barrier

Long wavelength InAs/InAsSb superlattice barrier infrared detectors with p-type absorber quantum efficiency enhancement

Theoretical Design of Uncooled Mid-Infrared PbSe P+pBn+ Barrier Detectors

Dark-Current-Blocking Mechanism in BIB Far-Infrared Detectors by Interfacial Barriers

Mid-wavelength Nbn Photodetector with High Operating Temperature and Low Dark Current Based on InAs/InAsSb Superlattice Absorber

Black Arsenic Phosphorus Mid-Wave Infrared Barrier Detector with High Detectivity at Room Temperature

Performance limits of the mid-wave InAsSb/AlAsSb nBn HOT infrared detector

Long and Very Long Wavelength InAs/InAsSb Superlattice Complementary Barrier Infrared Detectors

A Thermoelectrically Cooled nBn Type‐II Superlattices InAs/InAsSb/B‐AlAsSb Mid‐Wave Infrared Detector

Room-temperature InAsSb pBin detectors for mid-infrared application

Theoretical Study of Quaternary nBp InGaAsSb SWIR Detectors for Room Temperature Condition

High Performance InAs/GaSb Superlattice Long Wavelength Photodetectors Based on Barrier Enhanced Structures

High‐Performance Room‐Temperature Extended‐Wavelength InAs‐Based Middle‐Wavelength Infrared Photodetector

Enhanced Performance of HgCdTe Long-Wavelength Infrared Photodetectors with Nbn Design

Multistep InAs/InAsSb Staircase Nbn Long-Wavelength Infrared Detectors with Enhanced Charge Carrier Transport

Ultrahigh-performance superlattice mid-infrared nBn photodetectors at high operating temperatures

Low dark current Sb-based short-wavelength infrared photodetector