Abstract:Successful in situ chemical oxidation (ISCO) applications require real-time monitoring to assess the oxidant delivery and treatment effectiveness, and to support rapid and cost-effective decision making. Existing monitoring methods often suffer from poor spatial coverage given a limited number of boreholes in most field conditions. The ionic nature of oxidants ( e.g. , permanganate) makes time-lapse electrical resistivity tomography (ERT) a potential monitoring tool for ISCO. However, time-lapse ERT is usually limited to qualitative analysis because it cannot distinguish between the electrical responses of the ionic oxidant and the ionic products from contaminant oxidation. This study proposed a real-time quantitative monitoring approach for ISCO by integrating time-lapse ERT and physics-based reactive transport models (RTM). Moving past common practice, where an electrical-conductivity anomaly in an ERT survey would be roughly linked to concentrations of anything ionic, we used PHT3D as our RTM to distinguish the contributions from the ionic oxidant and the ionic products and to quantify the spatio-temporal evolution of all chemical components. The proposed approach was evaluated through laboratory column experiments for trichloroethene (TCE) remediation. This ISCO experiment was monitored by both time-lapse ERT and downstream sampling. We found that changes in inverted bulk electrical conductivity, unsurprisingly, did not correlate well with the observed permanganate concentrations due to the ionic products. By integrating time-lapse ERT and RTM, the distribution of all chemical components was satisfactorily characterized and quantified. Measured concentration data from limited locations and the non-intrusive ERT data were found to be complementary for ISCO monitoring. The inverted bulk conductivity data were effective in capturing the spatial distribution of ionic species, while the concentration data provided information regarding dissolved TCE. Through incorporating multi-source data, the error of quantifying ISCO efficiency was kept at most 5 %, compared to errors that can reach up to 68 % when relying solely on concentration data.

Dynamic Monitoring of In-situ Chemical Oxidation for Remediation of Hydrocarbon Contamination with Electrical Resistivity Tomography

Monitoring of In-Situ Chemical Oxidation for Remediation of Diesel-Contaminated Soil with Electrical Resistivity Tomography

Real-time monitoring of in situ chemical oxidation (ISCO) of dissolved TCE by integrating electrical resistivity tomography and reactive transport modeling

Electrokinetic remediation of petroleum hydrocarbon contaminated soil (I)

Evolution of in-situ thermal-enhanced oxidative remediation monitored by induced polarization tomography

In-Situ Generation Of Active Oxidants In Permeable Reactive Barriers

Geophysical Monitoring of Hydrocarbon-Contaminated Soils Remediated with a Bioelectrochemical System

Performance of Α-Methylnaphthalene Degradation by Dual Oxidant of Persulfate/calcium Peroxide: Implication for ISCO

Resistivity and Self-Potential Tomography Applied to Groundwater Remediation and Contaminant Plumes: Sandbox and Field Experiments

Multidisciplinary monitoring of an in-situ remediation test of chlorinated solvents

Recent progress on in-situ chemical oxidation for the remediation of petroleum contaminated soil and groundwater

Characterization of Contaminated Site Using Electrical Resistivity and Induced Polarization Methods

3D electrical resistivity tomography geophysical monitoring of the effectiveness of an environmental remediation system by pure oxygen injection

Quantitative study of in situ chemical oxidation remediation with coupled thermal desorption

Evaluating the potential for quantitative monitoring of in situ chemical oxidation of aqueous‐phase TCE using in‐phase and quadrature electrical conductivity

Raman Spectroscopic and Microscopic Monitoring of On-Site and In-Situ Remediation Dynamics in Petroleum Contaminated Soil and Groundwater

Application of in Situ Chemical Oxidation for the Remediation of Tph-Contaminated Soils

Decontamination of dense nonaqueous-phase liquids in groundwater using pump-and-treat and <i>in situ</i> chemical oxidation processes: a field test

In Situ Chemical Oxidation of Organic Contaminated Soil and Groundwater Using Activated Persulfate Process

Thermal conductive heating coupled with in situ chemical oxidation for soil and groundwater remediation: A quantitative assessment for sustainability

Application of <i>In Situ</i> Chemical Oxidation for the Remediation of TPH-Contaminated Soils