Abstract:Soil contamination from industrial activities is a large problem in urban areas worldwide. Understanding the spreading of contamination to underlying aquifers is crucial to make adequate risk assessments and for designing remediation actions. A large part of the northern hemisphere has quaternary deposits consisting of glacial clayey till. The till often has a complex hydrogeological structure consisting of networks of fractures, sand stringers and sand lenses that each contribute to a transport network for water, free phase and dissolved contaminants. Thus, to determine the possible flow-paths of contaminants, the geology must be described in great detail. Normally, multiple boreholes would be drilled in order to describe the geology, but boreholes alone do not provide the needed resolution to map such sand lenses and their connectivity. Cross-borehole full-decay time-domain induced polarization (TDIP) is a new tool that allows for quantitatively mapping not only contrasts in bulk resistivity, but also contrasts in spectral IP parameters. We present a feasibility study with synthetic tests and a field application on a clayey moraine environment with embedded sand lenses, with hitherto unseen ground-truth verification. Indeed, the investigated area was above the water table, which allowed for digging out the entire area after the investigation for an unprecedented description of the lens interconnectivity. The TDIP data were acquired with a full-waveform acquisition at high sampling rate, signal-processed by harmonic denoising, background removal, and de-spiking, and subsequently the full-waveform data were stacked in log-increasing tapered gates (with 7 gates per decade). The resulting TDIP decays, with usable time-gates as early as two milliseconds, were inverted in terms of a re-parameterization of the Cole-Cole model. The inverted models of the field data show a remarkable delineation of the sand lenses/layers at the site, with structure in both the resistivity and the IP parameters matching the results from the ground-truthing. The synthetic examples show that in models both below and above the groundwater table, sand-lenses with thicknesses comparable to the vertical electrode spacing can be well resolved. This suggests that full-decay cross-borehole TDIP is an ideal tool for high-resolution sand-lens imaging.

Characterization of Contaminated Site Using Electrical Resistivity and Induced Polarization Methods

Analysis of Subsurface Velocity Using CMP Gathers Picked Up by Unshielded GPR System: Results from an Experimental NAPL Contaminated Test Site

Delineation of contaminant plume for an inorganic contaminated site using electrical resistivity tomography: comparison with direct-push technique

Application of Electrical Resistivity Tomography to Monitor the Dewatering of Vertical and Horizontal Wells in Municipal Solid Waste Landfills

Reservoir evaluation method for complex resistivity using the borehole–surface electromagnetic method: A case study of an igneous reservoir in the K exploration area, China

Detailed LNAPL plume mapping using electrical resistivity tomography inside an industrial building

A framework for risk assessment of groundwater contamination integrating hydrochemical, hydrogeological, and electrical resistivity tomography method

Mapping and monitoring dense non-aqueous phase liquid source zone by fused surface and cross-borehole electrical resistivity tomography

Characterization of DNAPL source zones in clay-sand media via joint inversion of DC resistivity, induced polarization and borehole data

Image-guided structure-constrained inversion of electrical resistivity data for improving contaminations characterization

Application of induced polarization and resistivity to the environmental investigation of an old waste disposal area

Patterns of electrical properties change of heavy metal-organic compound contaminated media in soil-groundwater systems: From laboratory experiments to site application

An Analytical Solution for Contaminant Extraction from Multilayered Soil Using PVD-enhanced System

Detection of Soil Contamination Using Electrical Resistivity Tomography and Induced Polarization Methods By Tank Model

Evolution of in-situ thermal-enhanced oxidative remediation monitored by induced polarization tomography

Characterizing Multi-Source Heavy Metal Contaminated Sites at the Hun River Basin: an Integrated Deep Learning and Data Assimilation Approach

Optimized Survey Design for the Joint Use of Direct Current Resistivity and Induced Polarization: Monitoring of DNAPL Source Zone Evolution at a Virtual Field Site

Analytical Model for Electrokinetic Remediation of Contaminated Soil

Cross-borehole tomography with full-decay spectral time-domain induced polarization for mapping of potential contaminant flow-paths

Post-remediation geophysical assessment: Investigating long-term electrical geophysical signatures resulting from bioremediation at a chlorinated solvent contaminated site

Detection of Ionic Contaminants in Unsaturated Soils Using Time Domain Reflectometry Penetrometer