Abstract:Flow chemistry has greatly expanded the reaction toolbox by demonstrating a wide range of individual chemical transformations. For commercial scale processes, it provides an appealing alternative to batch reactors by reducing production costs, increasing product yield and overall process robustness. We describe an approach for continuous processing of a specialty chemical manufactured using a batch process with a typical yield of 150 kg per hour and concomitant adiabatic temperature increase of up to 250 °C. This necessitates controlled feed addition causing longer processing time, lower productivity, and undesirable polymerization reactions. We present a continuous process that addresses the challenges of thermal management and reaction selectivity using flow chemistry thereby enabling up to 12-fold reduction in residence time with a comparable product profile. Fundamental reactor engineering and design principles and associated safety considerations used for designing the reactor and continuous process are described. Guided by this analysis, a continuous process using a 1⁄4 inch tubular reactor is investigated. The results indicate residence time reduction from 6 hours to 30 minutes for comparable feed conversion of 87% and similar product composition. Greater than 90% conversion could not be achieved in the current reactor configuration and associated reactor runaway analysis suggests feed decomposition due to pressure fluctuations or insufficient reactants in the reactor. The analysis highlights the need for designing a reactor with better pressure control using a back pressure regulator and choosing a smaller diameter tube. These insights underscore the importance of applying fundamental reactor engineering principles for designing safe and efficient processes at an industrial scale.

Application of Stop-Flow Micro-Tubing Reactor System in Organic Reaction Development

Application of microfluidic reactors on synthesis reactions

The Continuous Flow Micro-Reaction

Microfluidic Device: A Miniaturized Platform for Chemical Reactions

Beyond Organometallic Flow Chemistry: The Principles Behind the Use of Continuous-Flow Reactors for Synthesis

Fundamental and Development of Microreaction Technology for the Application of Fine Chemicals Synthesis

Recent Advances and Applications in High-Throughput Continuous Flow

Synthesis and post-processing of nanomaterials using microreaction technology

An Efficient and Safe Platform Based on the Tube-in-tube Reactor for Implementing Gas-Liquid Processes in Flow

Reaction Discovery Using Acetylene Gas As the Chemical Feedstock Accelerated by the “Stop-Flow” Micro-Tubing Reactor System

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime

A platform for automated nanomole-scale reaction screening and micromole-scale synthesis in flow

Manipulation of gas-liquid-liquid systems in continuous flow microreactors for efficient reaction processes

Easy-to-perform and cost-effective fabrication of continuous-flow reactors and their application for nanomaterials synthesis

Continuous-Flow Microreactors for Polymer Synthesis: Engineering Principles and Applications

Towards Industrially Important Applications of Enhanced Organic Reactions by Microfluidic Systems

High-Speed Circulation Flow Platform Facilitating Practical Large-Scale Heterogeneous Photocatalysis

Fundamental Research and Applications of Droplet-Based Microreactor

New Progress of Fully Continuous Flow Reaction Technologies in Pharmaceutical Synthesis (20192022)

Multi‐Step Continuous‐Flow Organic Synthesis: Opportunities and Challenges

On-line monitoring of continuous flow chemical synthesis using a portable, small footprint mass spectrometer