Abstract:Flow chemistry has greatly expanded the reaction toolbox by demonstrating a wide range of individual chemical transformations. For commercial scale processes, it provides an appealing alternative to batch reactors by reducing production costs, increasing product yield and overall process robustness. We describe an approach for continuous processing of a specialty chemical manufactured using a batch process with a typical yield of 150 kg per hour and concomitant adiabatic temperature increase of up to 250 °C. This necessitates controlled feed addition causing longer processing time, lower productivity, and undesirable polymerization reactions. We present a continuous process that addresses the challenges of thermal management and reaction selectivity using flow chemistry thereby enabling up to 12-fold reduction in residence time with a comparable product profile. Fundamental reactor engineering and design principles and associated safety considerations used for designing the reactor and continuous process are described. Guided by this analysis, a continuous process using a 1⁄4 inch tubular reactor is investigated. The results indicate residence time reduction from 6 hours to 30 minutes for comparable feed conversion of 87% and similar product composition. Greater than 90% conversion could not be achieved in the current reactor configuration and associated reactor runaway analysis suggests feed decomposition due to pressure fluctuations or insufficient reactants in the reactor. The analysis highlights the need for designing a reactor with better pressure control using a back pressure regulator and choosing a smaller diameter tube. These insights underscore the importance of applying fundamental reactor engineering principles for designing safe and efficient processes at an industrial scale.

The Continuous Flow Micro-Reaction

Ionic Polymerizations in Continuous Flow

Continuous flow technology-a tool for safer oxidation chemistry

The Chapman Rearrangement in a Continuous-Flow Microreactor

Gas–Liquid Microchemical Oxidation for Continuous Synthesis Processes: A Short Review

Fundamental and Development of Microreaction Technology for the Application of Fine Chemicals Synthesis

Microreaction Processes for Synthesis and Utilization of Epoxides: A Review

Manipulation of gas-liquid-liquid systems in continuous flow microreactors for efficient reaction processes

Photochemical and photoredox reactions in continuous microreactors : application to cycloaddition, controlled polymerization and radical chemistry

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime

Microreaction Technology For Synthetic Chemistry

Accelerating Electrochemical Reactions in a Voltage‐Controlled Interfacial Microreactor

Transition-metal catalyzed asymmetric reactions under continuous flow from 2015 to early 2020

Recent Advances and Applications in High-Throughput Continuous Flow

Biocatalysts used for multi-step reactions in continuous flow

Liquid metal enabled continuous flow reactor: A proof-of-concept

Liquid–liquid Microflow Reaction Engineering

Contribution of microreactor technology and flow chemistry to the development of green and sustainable synthesis

Efficient pinnick oxidation by a superheated micro-reaction process

Recent advances in photoredox catalytic transformations by using continuous-flow technology

Advances in Continuous Aerobic Oxidation Based on Nitroxyl Radical Catalyst in Microreactors