Abstract:Flow chemistry has greatly expanded the reaction toolbox by demonstrating a wide range of individual chemical transformations. For commercial scale processes, it provides an appealing alternative to batch reactors by reducing production costs, increasing product yield and overall process robustness. We describe an approach for continuous processing of a specialty chemical manufactured using a batch process with a typical yield of 150 kg per hour and concomitant adiabatic temperature increase of up to 250 °C. This necessitates controlled feed addition causing longer processing time, lower productivity, and undesirable polymerization reactions. We present a continuous process that addresses the challenges of thermal management and reaction selectivity using flow chemistry thereby enabling up to 12-fold reduction in residence time with a comparable product profile. Fundamental reactor engineering and design principles and associated safety considerations used for designing the reactor and continuous process are described. Guided by this analysis, a continuous process using a 1⁄4 inch tubular reactor is investigated. The results indicate residence time reduction from 6 hours to 30 minutes for comparable feed conversion of 87% and similar product composition. Greater than 90% conversion could not be achieved in the current reactor configuration and associated reactor runaway analysis suggests feed decomposition due to pressure fluctuations or insufficient reactants in the reactor. The analysis highlights the need for designing a reactor with better pressure control using a back pressure regulator and choosing a smaller diameter tube. These insights underscore the importance of applying fundamental reactor engineering principles for designing safe and efficient processes at an industrial scale.

An Efficient and Safe Platform Based on the Tube-in-tube Reactor for Implementing Gas-Liquid Processes in Flow

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Accelerating gas–liquid chemical reactions in flow

Manipulation of gas-liquid-liquid systems in continuous flow microreactors for efficient reaction processes

Flow Distribution in a Novel Fixed Bed Bionic Reactor

Process intensification in gas-liquid mass transfer by nanofluids: Mechanism and current status

Remarkable improvement of gas–liquid mass transfer by modifying the structure of conventional T‐junction microchannel

Slurry Reactors For Gas-To-Liquid Processes: A Review

Scalable Thin-Layer Membrane Reactor for Heterogeneous and Homogeneous Catalytic Gas–liquid Reactions

Determination of fast gas–liquid reaction kinetics in flow

Hydrodynamics of gas-liquid microfluidics: A review

Bubble/Droplet Formation and Mass Transfer During Gas-Liquid-Liquid Segmented Flow with Soluble Gas in A Microchannel

Liquid metal enabled continuous flow reactor: A proof-of-concept

Automated in situ Measurement of Gas Solubility in Liquids with a Simple Tube-in-Tube Reactor.

An automated flow platform for accurate determination of gas-liquid-solid reaction kinetics

Hydrodynamics and mass transfer of concentric-tube internal loop airlift reactors: A review

Gas-liquid Countercurrent Flow Characteristics in a Microbubble Column Reactor

Microreactor designed for efficient plasma-liquid segmented flows

Rapid Measurement of Gas Diffusivity in Liquids Using a Tube‐in‐tube Reactor with an Unsteady‐state Strategy

Mass transfer mechanism and relationship of gas–liquid annular flow in a microfluidic cross-junction device

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime