Abstract:In hydraulic fracturing, fracturing fluids are used to create fractures in a hydrocarbon reservoir throughout transported proppant into the fractures. The application of many fields proves that conventional fracturing fluid has the disadvantages of residue(s), which causes serious clogging of the reservoir's formations and, thus, leads to reduce the permeability in these hydrocarbon reservoirs. The development of clean (and cost-effective) fracturing fluid is a main driver of the hydraulic fracturing process. Presently, viscoelastic surfactant (VES)-fluid is one of the most widely used fracturing fluids in the hydraulic fracturing development of unconventional reservoirs, due to its non-residue(s) characteristics. However, conventional single-chain VES-fluid has a low temperature and shear resistance. In this study, two modified VES-fluid are developed as new thickening fracturing fluids, which consist of more single-chain coupled by hydrotropes (i.e., ionic organic salts) through non-covalent interaction. This new development is achieved by the formulation of mixing long chain cationic surfactant cetyltrimethylammonium bromide (CTAB) with organic acids, which are citric acid (CA) and maleic acid (MA) at a molar ratio of (3:1) and (2:1), respectively. As an innovative approach CTAB and CA are combined to obtain a solution (i.e., CTAB-based VES-fluid) with optimal properties for fracturing and this behaviour of the CTAB-based VES-fluid is experimentally corroborated. A rheometer was used to evaluate the visco-elasticity and shear rate & temperature resistance, while sand-carrying suspension capability was investigated by measuring the settling velocity of the transported proppant in the fluid. Moreover, the gel breaking capability was investigated by determining the viscosity of broken VES-fluid after mixing with ethanol, and the degree of core damage (i.e., permeability performance) caused by VES-fluid was evaluated while using core-flooding test. The experimental results show that, at pH-value ( 6.17 ), 30 (mM) VES-fluid (i.e., CTAB-CA) possesses the highest visco-elasticity as the apparent viscosity at zero shear-rate reached nearly to 10 6 (mPa·s). Moreover, the apparent viscosity of the 30 (mM) CTAB-CA VES-fluid remains 60 (mPa·s) at (90 ∘ C) and 170 (s - 1 ) after shearing for 2-h, indicating that CTAB-CA fluid has excellent temperature and shear resistance. Furthermore, excellent sand suspension and gel breaking ability of 30 (mM) CTAB-CA VES-fluid at 90 ( ∘ C) was shown; as the sand suspension velocity is 1.67 (mm/s) and complete gel breaking was achieved within 2 h after mixing with the ethanol at the ratio of 10:1. The core flooding experiments indicate that the core damage rate caused by the CTAB-CA VES-fluid is ( 7.99 % ), which indicate that it does not cause much damage. Based on the experimental results, it is expected that CTAB-CA VES-fluid under high-temperature will make the proposed new VES-fluid an attractive thickening fracturing fluid.

Research of a Fracturing-Oil Displacement Integrated Working Fluid Based on Betaine Surfactant

Study on small molecule gel fracturing fluid and its in-situ convertion into efficient oil displacement agent

Research on Performance Evaluation of Polymeric Surfactant Cleaning Gel-Breaking Fluid (GBF) and Its Enhanced Oil Recovery (EOR) Effect

EOR mechanism of fracture oil displacement agent for ultra-low permeability reservoir

Preparation and performance evaluation of viscoelastic zwitterionic surfactant for cleaning fracturing fluids

Pseudo gemini surfactant fracturing fluid with dual function of fracturing and oil flooding for enhanced oil recovery

Self-Assembled Viscoelastic Surfactant Micelles with pH-Responsive Behavior: A New Fracturing-Displacement Integrated Working Fluid for Unconventional Reservoirs

Synergistic effect of dual hydrogen-donor deep eutectic solvent for performance improvement of fracturing-oil expulsion fluids

Performance evaluation of oil-displacement viscoelastic zwitterionic surfactant fracturing fluid

Formulation and evaluation of a new multi-functional fracturing fluid system with oil viscosity reduction, rock wettability alteration and interfacial modification

A Novel CO2 and Pressure Responsive Viscoelastic Surfactant Fluid for Fracturing

Research on EOR for ultralow interfacial tension foam in high-temperature and high-salinity reservoirs: flooding simulation and application in Shengli Oilfield

Organic Acid-Enhanced Viscoelastic Surfactant and Its Application in Fracturing Fluids

Zwitterionic-nonionic compound surfactant system with low chromatographic separation effect for enhanced oil recovery

A smart recyclable VES fluid for high temperature and high pressure fracturing

Study of a low-damage efficient-imbibition fracturing fluid without flowback used for low-pressure tight reservoirs

Study on a reusable surfactant fracturing fluid and its application in Chang‐6 oil reservoir

Construction and performance evaluation of novel compound oil displacement system for enhanced oil recovery

Synergistic anionic/zwitterionic mixed surfactant system with high emulsification efficiency for enhanced oil recovery in low permeability reservoirs

Preparation and Performance Evaluation of CO2 Foam Gel Fracturing Fluid

Experimental Investigation and Performance Evaluation of Modified Viscoelastic Surfactant (VES) as a New Thickening Fracturing Fluid