Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In-situ Polymerization of P-Sulfonated Allyl Phenyl Ether Coated Graphite Electrode for Lithium Ion Battery

Construction of Artificial SEI on Graphite Electrode through Electropolymerization of p-Sulfonated Polyallyl Phenyl Ether

Organic salts with unsaturated bond and diverse anions as substrates for solid electrolyte interphase on graphite anodes

In Situ Synthesis of Li2S‐Loaded Amphiphilic Porous Carbon and Modification of the Li2S Electrode for Long‐Life Li2S Batteries

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Isotropic Structure and Polymer Interface Intensified Lithium-Ion Transmission in Spherical Graphite Tailings/Coke Composite Anode

Scalable Synthesis of Carbon Stabilized Sio/Graphite Sheets Composite As Anode for High-Performance Li Ion Batteries

Efficient Utilization of Macropores as Artificial Solid–Electrolyte Interphase Channels for High-Capacity Silicon/Graphite Anode Materials

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries

Highly Graphitized Carbon Coating on SiO with a π–π Stacking Precursor Polymer for High Performance Lithium-Ion Batteries

Novel Gel Polymer Electrolyte for High-Performance Lithium–sulfur Batteries

Controllable solid electrolyte interphase precursor for stabilizing natural graphite anode in lithium ion batteries

Employing Ni-Embedded Porous Graphitic Carbon Fibers for High-Efficiency Lithium–Sulfur Batteries

Engineering Polymer-Assisted Self-Assembly Process for High-Capacity and Cycle-Stable Si-on-Graphite Anode of Li-Ion Batteries

In Situ Self‐Polymerization of Thioctic Acid Enabled Interphase Engineering Towards High‐Performance Lithium–Sulfur Battery

Constructing a universal artificial polymeric ionic liquid interfacial film for graphite anode and High-Voltage cathode

Sulfonated poly(vinyl alcohol) as an artificial solid electrolyte interfacial layer for Li metal anode

Enabling Bio‐Cathode with Graphene Coating via Networking Soy‐Protein and Polydopamine for Li–S Batteries

Elastic and Stretchable Gel Polymer Electrolyte Coating to Improve Long-Term Cycling Stability of High-Areal-Capacity Sio Electrode for Lithium-Ion Battery

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating