Abstract:Prototype measurements belong to the key steps in the development of antenna structures. Although accurate validation of their far-field performance can be realized in dedicated facilities, such as anechoic chambers, the high cost of their construction and maintenance might not be justified if the main goal of measurements is to support teaching or low-budget research. Instead, they can be performed in non-anechoic conditions and then refined using appropriate correction algorithms. Unfortunately, the existing post-processing methods suffer from multiple challenges that include manual setup of parameters as well as validation of performance in idealized conditions. In this communication, a multi-taper-based framework for correction of antenna characteristics obtained in non-anechoic environments has been proposed. The algorithm augments one-shot measurements of the structure under test in order to extract the line-of-sight responses while attenuating the interferences pertinent to multi-path propagation and noise from external sources of radiation. The performance of the proposed correction routine has been demonstrated in two test sites using a geometrically small Vivaldi radiator and validated against state-of-the-art techniques from the literature. The uncertainty budget for the measurements performed using the approach amounts to 0.26 dB, which is low given challenging propagation conditions considered for experiments.

A Study on the Correction of Reflection and Transmission Coefficients for Electromagnetic Waves Incident on Dielectric and Plasma Based on FDTD Method

An Area-Averaged Conformal Technique for the Electromagnetic Simulations of Debye Medium

Hybrid FDTD Method for Studying Electromagnetic Coupling Effects of Transmission Line Networks

An Improved Indirect Time-domain Technique on Lower Frequency Antenna

Methods of Correcting for Variations in Cable in Microwave Measurement

Microwave method based on curve fitting method for high-precision collision frequency diagnosis

Reflection of Transmitting Antenna in Reverberation Chamber and Its Effect on Chi-square Validation

An Improved Calibration Method for Target Positioning in RFSS

On the Antenna Illumination Effects in Monostatic Reflectivity Determination for Microwave Calibration Targets

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

Near-Field Measurements Based Source Reconstruction Approach for Radiated Emissions Prediction

An Efficient Probe Calibration Based Near-Field to Near-Field Transformation for EMI Diagnosis

SO-FDTD Method and Its Application to the Calculation of Electromagnetic Wave Reflection Coefficients of Plasma

The Transmission Characteristics of Radio Wave in the Plasma Based on Finite Difference Time Domain

Multi-Taper-Based Automatic Correction of Non-Anechoic Antenna Measurements

Measuring the Time-Varying Channel Characteristics of the Plasma Sheath From the Reflected Signal

Study on Near-Field to Far-Field Transformation of Equipment'S Electromagnetic Radiant Field

Evaluation Of Disturbance In The Antenna Calibration Of The Microwave Radiometer

Improving Calibration Accuracy of Scattered Field Based on Full Wave Simulation of Microwave Imaging System

A Calculation Method of Electromagnetic Wave Reflection in Plasma Sheath Environment

A Calibrated Over-the-Air Measurement Method for Error Vector Magnitude Characterization