Abstract:Heterogeneous W-steel joining components will produce brittle intermetallic compounds (IMCs) and significant residual stress in the interface. Adding a Cu interlayer serves as an effective solution. Nevertheless, the strengthening of W-Cu-steel joints is restricted because W-Cu and Cu-steel are members of binary immiscible and finite solid solution systems. Thus, accomplishing interface alloying by overcoming the positive generating energy of insoluble systems and opening up interatomic diffusion channels is a crucial issue to be addressed. In this work, casting and brazing technologies were incorporated into bonding W-Cu-steel to provide a high temperature field, as well as the dissolving and wetting of Cu-based liquid phase to refractory W. It is shown that the superior tensile strength of the W/Cu castings-steel brazed joints (similar to 264 MPa) was achieved, and the joint survived 1000 cycles of thermal fatigue under 1 MW/m(2). To assess the effects of brazing and casting on the W-Cu-steel joint, a detailed analysis was conducted on the mechanism of atomic diffusion in the joint interface. It is considered that in W-Cu joining, casting provided a higher thermodynamic driving force than brazing, thus achieving better interatomic diffusion and a wider microalloying region. Cu-steel joining achieved good alloying and forming dendritic extensions by intergranular diffusion. Based on the process optimization results, the feasibility of preparing the U-shaped first wall (FW) mock-up with W armor using brazing technology was verified. This study provides a new technological path, offering a major design and manufacturing guide for plasma facing components (PFCs).

Dual Optimization of Energy-Absorbing Intermediate Layer for Diversified Enhancement of Heterogeneous Brazed Joints

Study on the Residual Stress Relieving Mechanism of C/C Composite-Nb Brazed Joint by Employing a Structurally Optimized Graphene Reinforced Cu Foam Interlayer

Long-lasting action mechanism of 3D skeleton regulated the residual stress fluctuations in SiC f /SiC heterogeneous joints

Low residual stress C/C composite-titanium alloy joints brazed by foam interlayer

AgCuTi/graphene-reinforced Cu Foam: A Novel Filler to Braze ZrB2-SiC Ceramic to Inconel 600 Alloy

Effect of Cu foam on the microstructure and strength of the SiCf/SiC-GH536 brazed joint

Graphite-reinforced AgCuTi/Cu foam composite filler to braze Al2O3 ceramic and 304 stainless steel

Microstructure and Performance of Graphite/Copper Joints by Brazing with Different Interfacial Structures

Improving the Interface Strength and Fatigue Property of W-Cu-steel Brazed Joint Via Induced Interface Alloying

Chemically dealloyed Mg–Cu alloy lamina as an interlayer for reinforcing a C/C composite – TC4 alloy vacuum brazed joint

An in situ 3D core–sheath interlayer utilized for reinforcing a WC–Co/3Cr13 brazed joint

Microstructure and shear strength of SiC/Zr joint brazed with LiAlSiO4/graphene-coated Cu-foam composite interlayer

High Reflectivity and Thermal Conductivity Ag–Cu Multi-Material Structures Fabricated via Laser Powder Bed Fusion: Formation Mechanisms, Interfacial Characteristics, and Molten Pool Behavior

Exploring avoiding brittle compounds in brazed joints of C/C composites and DD3 alloys through surface modification

Comprehensive Enhancement of the Mechanical and Thermo-Mechanical Properties of W/Cu Joints Via Femtosecond Laser Fabricated Micro/nano Interface Structures

Interfacial microstructure and strength of brazed copper/porous copper foam towards the effect of porous copper foam pore density and brazing holding time

Achieving Better Strength-Toughness Synergy in Heterogeneous Cu/Ni/graphene Composites: A Molecular Dynamics Simulation

Bonding of graphite to Cu with metal multi-foils

Improved mechanical-physical performances of copper composites with reduced graphene oxide and carbonized polymer dots as multi-scale synergetic reinforcements

A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites

Bonding Process of Copper Foam-Silver Composite and Performance Characterization of the Joint