Abstract:The microstructure of Al-Cu-Li alloys is influenced by the alloying contents, which in turn affect the ultimate performance. This study examined the microstructure characteristics of Al-Cu-Li alloys with varying Li contents (1.05, 1.30, and 1.66 wt.%) in as-cast state, as well as microstructure evolution during homogenization treatments. The investigation employed a range of analytical techniques, including optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), differential scanning calorimeter (DSC), focused ion beam (FIB), transmission electron microscopy (TEM), and thermodynamic calculation software. The findings indicate that the eutectic phase exhibited significant variations with the Li content changing. Three distinct low-melting phases were identified in 1.05Li alloy, including Ag-containing Al 2 CuMg, Al 7 Cu 4 Li, and Al 2 Cu. As Li content was elevated to 1.30 wt.%, there was a noticeable drop in the quantities of Ag-containing Al 2 CuMg and Al 7 Cu 4 Li phases. Conversely, the Al 2 Cu phase increased, and a few Al 2 CuLi phases emerged. When the Li raised to 1.66 wt.%, an increased Al 2 CuLi phase was discovered, which existed along the dendritic edges. However, there were only little Ag-containing Al 2 CuMg phase, and no Al 7 Cu 4 Li phase detected. The initial melting temperatures for the four soluble eutectic phases were systematically arranged in the following order: Ag-containing Al 2 CuMg < Al 7 Cu 4 Li < Al 2 Cu < Al 2 CuLi. The elevated Li content resulted in a challenge of dissolution of the eutectic phases. Following 500°C/12h homogenization process, the containing-Ag Al 2 CuMg phase dissolved. Additionally, the Al 7 Cu 4 Li and Al 2 Cu phases were eliminated through subsequent 515°C/12h homogenization. In addition, the Al 2 CuLi phase was still existing.

A New Polymorph Phase of LiAlSiO4in Β-Lialsio4/cu Composite

Interface structure and properties of spray-forming (SiCp+β-LiAlSiO4)/6092Al matrix composites

A new Al5Cu6(Li,Mg)2 cubic phase in an Al-Cu-Li-Mg-X alloy

Microstructure and thermal properties of binary ceramic particle-reinforced aluminum matrix composites with SiC/LAS

Theoretical Investigation of Cu Influence on the Stability Characteristics of T-phase in Crossover Alloys

Influence of lanthanum additive on phase transition, microstructure and lithium ionic conductivity of beta-eucryptite

On the Hardness and Elastic Modulus of Phases in SiC-Reinforced Al Composite: Role of La and Ce Addition

Influence of enhanced Li content on the as-cast eutectic phase features and the evolution during homogenization of Al-Cu-Li alloys

Tuning high and low thermal expansion coefficients of Li2O–BaO–Al2O3–B2O3–SiO2/quartz LTCC composites by replacing quartz partly with α-Al2O3 or ZrO2

Phase Equilibria of the Al-Li Binary System

Role of Phonons in Li-Diffusion, Thermal Expansion and Phase Transitions in beta-eucryptite: Inelastic Neutron Scattering and Lattice Dynamics Studies

Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB 2 co-reinforced Al-Zn-Mg-Cu composites

Realizing reversible phase transformation of shape memory ceramics constrained in aluminum

Ab-initio Molecular Dynamics study of 1-D Superionic Conduction and Phase Transition in \b{beta}- Eucryptite

Enhanced thermal and mechanical properties of Li–Al–Si composites with K2O–B2O3–SiO2 glass for LTCC application

Cohesive, Electronic, and Structural Properties Ofal3li: an Important Metastable Phase

Experimental determination of the phase equilibria of aluminum-rich Al−Li−Cu alloys

Study Of Multi-Carbide B4c-Sic/(Al, Si) Reaction Infiltrated Composites By Sem With Ebsd

Processing and Mechanical Properties of Ti<sub>2</sub>AlC MAX Phase Reinforced AE44 Magnesium Composite