Abstract:A 3D multiphysics coupling numerical model is developed to predict plasma jet characteristics and particle in‐flight behavior in atmospheric plasma spraying. The velocity, temperature, and diameter of yttria‐stabilized zirconia particles are experimentally diagnosed by DPV‐2000 system to verify the accuracy of the model. Issues such as process parameters affecting particle in‐flight behavior and melting state are investigated. The preparation of coatings by atmospheric plasma spraying gives rise to complex physical processes, which present challenges to the study of plasma jet characteristics and particle in‐flight behavior. Herein, a 3D numerical model that integrates multiple physical phenomena, including electromagnetism and thermal and gas dynamics, to simulate the heating, acceleration, and melting of particles under the thermal–mechanical effect, is developed. Meanwhile, yttria‐stabilized zirconia (YSZ) coatings are prepared under varying process parameters. The DPV‐2000 system is employed for the diagnosis of particle velocity, surface temperature, and diameter. Following comparison, the simulation exhibits errors of 4.5% and 14.8% for the maximum temperature and velocity, respectively. An increase in current intensity from 500 to 600 A results in a rise in the proportion of particles exhibiting temperatures above the melting point (2963 K), from 75.1 to 93.4%, accompanied by an increase in average velocity of ≈16.6%. As the spraying distance increases from 60 to 100 mm, the proportion of particles melting decreases from 93.5 to 66.3%, and the average velocity decreases by ≈9.2%. This work will provide a theoretical foundation for the optimization of process parameters to adjust particle behavior and melting state, thus achieving an optimal spraying effect.

A Preliminary Microstructure Investigation of YSZ Coatings Deposited by Plasma Spray-Physical Vapor Deposition Using a Shrouded Plasma Torch

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Microstructures of Yttria-Stabilized Zirconia Coatings by Plasma Spray-Physical Vapor Deposition

Very low-pressure plasma-sprayed dense yttria-stabilized zirconia coatings using an axial bi-cathode plasma torch

Effects of different nano-agglomerated powders on the microstructures of PS-PVD YSZ coatings

Effect of spraying power on the morphology of YSZ splat and micro-structure of thermal barrier coating

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Regional characteristic of 7YSZ coatings prepared by plasma spray-physical vapor deposition technique

Dense nanostructured YSZ coating prepared by low-pressure suspension plasma spraying: Atmosphere control and deposition mechanism

A Study on YSZ Abradable Seal Coatings Prepared by Atmospheric Plasma Spray and Mixed Solution Precursor Plasma Spray

Power controlled microstructure and infrared properties of air plasma spraying based on YSZ coatings

Microstructural and columnar growth characteristics of 7YSZ thermal barrier coatings fabricated by plasma spray physical vapor deposition

Highly Segmented Thermal Barrier Coatings Deposited by Suspension Plasma Spray: Effects of Spray Process on Microstructure

Phase transitions and microstructure evolutions of in-situ YSZ-ZrC composite coating under long-time plasma torch ablation

Systematic Investigation on the Influence of Spray Parameters on the Mechanical Properties of Atmospheric Plasma-Sprayed YSZ Coatings

Modeling Microstructure Formation in Yttria-Stabilized Zirconia (YSZ) Droplet with High Impact Velocity in Supersonic Plasma Spray

Effect of Process Parameters on Yttria‐Stabilized Zirconia Particles In‐Flight Behavior and Melting State in Atmospheric Plasma Spraying

Effect of the core-shell structure powders on the microstructure and thermal conduction property of YSZ/Cu composite coatings