Experimental Investigation of Flow Control Using Blade End Slots in a Highly Loaded Compressor Cascade

Yumeng Tang,Yangwei Liu,Lipeng Lu,Haibao Lu,Ming Wang

2017-01-01

Abstract:A detailed experimental investigation is conducted to suppress three-dimensional (3D) corner separation by a proposed passive control method using blade end slots in a highly loaded high-speed compressor cascade. Experiments are carried out under a wide range of incidence angles at Ma=0.59 using blades with and without blade end slots, respectively. Based on the experimental results, extensive comparisons show that the proposed method using blade end slots can efficiently suppress the 3D corner separation and broaden the effective operating range in the highly loaded high-speed compressor cascade. The total pressure loss is significantly reduced under most conditions. The reduction of total pressure loss in the measurement plane is as high as 18.4%, 20.6%, 24.3% and 39.4% at the incidence angle of-1.69˚, 0˚, 2˚ and 4˚, respectively. Furthermore, spanwise distributions of the pitch-averaged total pressure loss and deviation angle as well as the 3D flow field structures are analyzed to reveal the flow control mechanisms using blade end slots. The blade end slots can generate self-adaptive high momentum jet flow through the pressure difference from blade pressure and suction surface. These jet flows from the blade end slots effect downstream along the blade suction surface and significantly increase the flow momentum in the corner region. The main secondary vortex structures are suppressed by the high momentum jet flow; the 3D corner separation is reduced, and the two-dimesionality in the mid-span region is enhanced.