Abstract:Ferromagnetic shape memory alloys (FSMAs), such as Ni2MnGa alloy, promise to be the key materials in manufacturing new type of actuator and sensor because of their high responsive speed and large strain output. In order to find the best functions of FSMAs, the understanding of their martensite transformation crystallography is of enormous necessity and importance. In the present study, the topological model of martensite transformation was applied to the analysis of the interphase interfacial defect structure and crystallography of martensite transformation, such as the habit plane index and orientation relationship, in a Ni2MnGa alloy. The results obtained in this work were compared with the prediction from the phenomenological theory of martensite crystallography (PTMC). When the transformation dislocation b(+1/+1)(D1) with smaller Burgers vectors and the lattice invariant deformation (LID) dislocation b(L)=0.186[11 (1) over bar](M) are activated to accommodate the coherency strain with a twist angle omega=3.2 degrees, the habit plane is determined to be {0.691 -0.117 0.713}(P) represented in the parent crystal frame, having an inclination angle psi(P)=42.000 degrees with the terrace plane (111)(P). Furthermore, the orientation relationship between the parent and martensite phases is found to be, namely, {0.69 -0.117 0.713}(P) 0.317 degrees away from (101)(M) and [1 (1) over bar0](P) about 3.200 degrees away from [11 (1) over bar](M), which are close to the calculated values based on the phenomenological theory of martensite crystallography. It is evident that the transformation dislocation with smaller Burgers vectors can be activated more easily during a martensite transformation. Additionally, for a range of twist omega, the alternative combination of disconnection and LID might be introduced in the topological model to obtain multiple predictions of martensite transformation crystallography, which could provide an explanation for the diversity and complexity of martensite transformation crystallography resulting from the different measured positions or external fields. Moreover, the parameters of the interfacial defect network, i.e., the line direction and the spacing of the interfacial defects, were also determined according to the topological model of martensite transformation, while the PTMC provides limited information of the microstructure of the martensite interface. It has been shown that the topological model of martensite transformation exhibits greater flexibility and advantage compared to the PTMC.

Surface Relief Accompanying Martensitic Transitions in an Fe-Ni-C Alloy by Atomic-Force Microscopy and Phenomenological Theory of Martensitic Crystallography

Modulus Softening During the Γ→ɛ Martensitic Transformation in Fe–25Mn–6Si–5Cr–0.14N Alloys

Surface Relief Associated with Martensite and Bainite in a Cu–Zn–Al Alloy Measured by Atomic Force Microscopy

Surface relief characteristics of martensitic transformation in a Fe-based shape memory alloy

Application of Atomic-Force Microscopy to Metallography

Quantitative Analysis for the Displacement of Tent-Shaped Surface Relief of Lath Martensite in Fe-Based Alloy

ATOMIC FORCE MICROSCOPE INVESTIGATION OF THE SURFACE RELIEF EFFECT OF BAINITE IN AN Fe-C-Mn-Ni-Si ALLOY

In-situ Study of Surface Relief Due to Cubic-Tetragonal Martensitic Transformation in Mn69.4Fe26.0Cu4.6 Antiferromagnetic Shape Memory Alloy

AFM Observation and Quantitative Analysis of Macroscopic Lattice Deformation Character in ｛225｝f Martensite Transformation

In Situ Atomic Force Microscope Study of High-Temperature Untwinning Surface Relief in Mn-Fe-Cu Antiferromagnetic Shape Memory Alloy

Atomic force microscopy study and qualitative analysis of martensite relief in zirconia

Study on Surface Relief Related to Reverse Martensitic Transformation in Mn-Based High-Temperature Antiferromagnetic Shape Memory Alloy

AFM Observation of Macroscopic Lattice Deformation Character Istic of {3,10,15}_f Martensite Transformation

STUDY ON THE DISLOCATION STRUCTURE OF INTERPHASE INTERFACE AND MARTEN SITE TRANSFORMATION CRYSTALLOGRAPHY IN Ni 2 MnGa ALLOY

A method of discrimination between stress-assisted and strain-induced martensitic transformation using atomic force microscopy

Method of Γ(fcc)→ε(hcp) Martensitic Transformation Shear Angle Determination by Atomic Force Microscope

Observation of Bainite Surface Reliefs in Fe–C Alloy by Atomic Force Microscopy

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Nanocrystallization and Martensitic Transformation in Fe–23.4Mn–6.5Si–5.1Cr (wt.%) Alloy by Surface Mechanical Attrition Treatment

High-resolution Electron Microscopy Study on the Substructure of Ti–Ni–Hf B19′ Martensite

Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy