Abstract:The intrinsic stacking fault energy (SFE) of copper under volumetric, longitudinal, and shear strains is investigated using density functional theory (GGA-PBE). Calculations are performed using a copper slab model aligned perpendicular to the (111) intrinsic stacking fault plane. The calculated SFE for unstrained copper is γ = 41 mJ/m2. Results show a strong dependence of γ on strain and distinct behavior for different types of strain: (a) volumetric and longitudinal in the direction perpendicular to the stacking fault, (b) longitudinal parallel to the stacking fault, and (c) shear parallel to the stacking fault. In the first case (a), the SFE decreases monotonically with strain with a slope dγ/dε|ɛ=0 = −0.44 J/m2 and −0.87 J/m2 for volumetric and longitudinal, respectively, and with d2γ/dε2 > 0. In contrast, for longitudinal strain parallel to the stacking fault (b), the SFE dependence exhibits d2γ/dε2 < 0 with a maximum at ε ≈ −0.015. For the case of shear parallel to the stacking fault (c), the SFE is nearly constant at small and moderately large strain, but drops rapidly at very large strain (by a factor of 1/3 for 〈1¯10〉{111} shear at ε = ±0.1). For large 〈112¯〉{111} shear strains, the SFE can either increase or decrease at large strain depending on the sign of the strain. In volumetric or longitudinal (perpendicular to the stacking fault) tension and longitudinal strain in the boundary plane (and for some shear directions), the SFE can become negative, implying a limit on the stability of the fcc crystal structure. The strong dependence of the SFE on strain suggests deep implications for the mechanical properties, microstructural evolution, and dynamic plasticity of metals at high pressure, during severe plastic deformation, and in shock-loading conditions.

First-principles Investigation of Strain Effects on the Stacking Fault Energies, Dislocation Core Structure, and Peierls Stress of Magnesium and Its Alloys

Local Lattice Distortion Mediated Formation of Stacking Faults in Mg Alloys

Solute effect on basal and prismatic slip systems of Mg

First Principles Studies of Stacking Fault Energies in Ternary Magnesium Alloys

Synergetic effects of solute and strain in biocompatible Zn-based and Mg-based alloys

Effect of temperature-induced solute distribution on stacking fault energy in Mg–X(X = Li, Cu, Zn, Al, Y and Zr) solid solution: a first-principles study

Effects of Doping Atoms on the Generalized Stacking-Fault Energies of Mg Alloys from First-Principles Calculations

Synergistic effect of solute and strain on the electrochemical degradation in representative Zn-based and Mg-based alloys

Precipitation Size and Strain Rate Dependence of Dislocation-Amorphous Nanopillar Interaction Mechanism in Magnesium

Generalized Stacking Fault Energy, Ideal Strength and Twinnability of Dilute Mg-based Alloys: A First-Principles Study of Shear Deformation

First-principles data for solid-solution strengthening of magnesium: From geometry and chemistry to properties

Basal-plane Stacking-Fault Energies of Mg Alloys: A First-Principles Study of Metallic Alloying Effects

Synergistic Impact of Mg and Ge Co-doping on Stacking Fault Energy and Underlying Mechanisms in Al

Room Temperature High-Plasticity Magnesium Alloy Design Based on Stacking Fault Energy Theory

Effect of strain on the stacking fault energy of copper: A first-principles study

Ab Initio Study of the Effect of Solute Atoms Zn and Y on Stacking Faults in Mg Solid Solution

Effects of Alloying Elements on Stacking Fault Energies and Electronic Structures of Binary Mg Alloys: A First-Principles Study

Strategy to Enhance Intrinsic Ductility and Surface Stability of Mg-Zn-R (R = La to Sm) Alloys from a First-Principles Study

First-principles Calculations of Generalized Stacking Fault Energy in Mg Alloys with Sn, Pb and Sn+Pb Dopings

Basal-Plane Stacking-Fault Energies of Mg: A First-Principles Study of Li- and Al-Alloying Effects

First-principles determination of dislocation properties in magnesium based on the improved Peierls–Nabarro equation