Abstract:The purpose of this research was to enhance the stab resistance of protective clothing material by developing a new high-density nonwoven structure. Ice picks often injure Japanese police officers due to the strict regulation of swords in the country. Consequently, this study was designed to improve stab resistance against ice picks. Most existing anti-stab protective clothing research has focused on various fabrics impregnated with resin, an approach that brings with it problems of high cost and complicated processing. Seldom has research addressed the potential for improving stab resistance by using nonwoven structures, which exhibit better stab resistance than fabric. In this research, we prepared a series of nonwoven structures with densities ranging from about 0.14 g/cm<sup>3</sup> to 0.46 g/cm<sup>3</sup> by varying the number of stacked layers of Kevlar/polyester nonwoven under a hot press. We then proposed two methods for producing such hot-press nonwovens: the multilayer hot-press method and the monolayer hot-press method. Stab resistance was evaluated according to NIJ Standard-0115.00. We also investigated the relationship among nonwoven density, stab resistance, and flexural rigidity, and here we discuss the respective properties of the two proposed methods. Our results show that stab resistance and flexural rigidity increase with nonwoven density, but flexural rigidity of nonwovens prepared using the monolayer hot-press method only shows a slight change as nonwoven density increases. Though the two methods exhibit little difference in maximum load, the flexural rigidity of nonwovens prepared using the monolayer hot-press method is much lower, which contributes to superior wear comfort. Finally, we investigated the mechanism behind the stabbing process. Stabbing with an ice pick is a complicated process that involves many factors. Our findings indicate that nonwovens stop penetration primarily in two ways: nonwoven deformation and fiber fractures.

Stab-resistant Properties of Multi-Axial Warp Knitted Fabric

The experimental research on the stab resistance of warp-knitted spacer fabric

Experimental investigation on stab-resistant properties of co-woven-knitted fabric

Tensile Properties of Reinforced Multi-Axial Warp Knitted Fabrics

Failure Analysis of High-performance Woven Fabrics during Quasistatic Stabbing

Stab resistance of triaxial woven fabrics for soft body armor

Investigation of impact performance of 3-dimensional interlock polymer fabrics in double and multi-angle pass stabbing

Stab/Puncture Resistance Performance of Needle Punched Nonwoven Fabrics: Effects of Filament Reinforcement and Thermal Bonding

Preparation and sports performance of multilayer flexible anti stabbing fabric martial arts sports composite conjugate materials

Optimization the Stab Resistance and Flexibility of Ultra-High Molecular Weight Polyethylene Knitted Structure Fabric with Response Surface Method

Characterization of mechanical properties of stab-resistant angle-ply flexible composites

Effects of STF and Fiber Characteristics on Quasi-Static Stab Resistant Properties of Shear Thickening Fluid (STF)-Impregnated UHMWPE/Kevlar Composite Fabrics

Consideration of Yarn Anisotropy in the Investigation of the Puncture Resistance of Fibrous Materials

Stab-Resistant Performance of the Well-Engineered Soft Body Armor Materials Using Shear Thickening Fluid

Development of a high-density nonwoven structure to improve the stab resistance of protective clothing material

Synergistic Effects of Needle Punching and Shear-Thickening Fluid on Sandwich-Structured Composites Made of Nonwoven and Woven Fabrics

Yarn dynamic tensile behavior and meso-scale numerical simulation method for STF-Kevlar fabrics

Study of the knife stab and puncture-resistant performance for shear thickening fluid enhanced fabric

Process Technology and Performance Evaluation of Nylon 6/PU Stab Resistance Fabric Matrix

Investigation of slashing mechanisms and behavior of high-performance fabrics

The Effect of Stitch Density and Stitching Patterns on the Puncture Resistance of High Strength Plain Woven Fabric