Abstract:Textile Research Journal, Ahead of Print. Soft and lightweight personal protective equipment for civil or military use that is made of cut-resistant textiles is usually rigid and heavy, less elastic or flexible. Insertion of elastane fiber during the fabrication of rigid textiles seems to be working, but actually is not. Therefore, it presents a severe challenge in achieving an appropriate balance among elasticity, flexibility, and protection. To address this issue, an elastic cut-resistant composite yarn is fabricated by single wrapping ultra-high molecular weight polyethylene around elastic Spandex. The effects of wrapping parameters (including the twist, spindle speed, and yarn combination) on yarn elasticity and coverage are investigated to achieve a perfect wrapping, and the cut-resistance of the composite yarn is evaluated by using a self-improved AUTOGRAPH universal testing machine. It demonstrates that the cutting process of the composite yarn consists of four stages, the cut modulus and yarn elasticity are highly correlated with yarn structure and wrapping process parameters. The optimizing coverage and cut-resistance are achieved when the twist is 750 t/m, which is also with a high elastic recovery rate (79.79%) and low plastic deformation rate (10.11%). Groups of parallelized composite yarns with varying densities are fabricated by self-improved sample holders to simulate the cut-resistant weaving fabrics with different weaving densities, of which the cut-resistance is evaluated. The resistance against cutting varies significantly among different groups, which is directly proportional to their densities. Finally, two types of elastic cut-resistant fabrics with different structures are woven from fabricated elastic cut-resistant composite yarns practically. Both weft-backed weave and the double-layer weave fabrics have good flexibility and protection, of which the cut-resistance is level 1 and level 2, respectively. Thus, the composite yarn has an excellent elasticity and maintained cut-resistance, which is an ideal material for the production of highly elastic protective textiles.

Investigation of slashing mechanisms and behavior of high-performance fabrics

Failure Analysis of High-performance Woven Fabrics during Quasistatic Stabbing

Study of the knife stab and puncture-resistant performance for shear thickening fluid enhanced fabric

Stab resistance of triaxial woven fabrics for soft body armor

Soft Armor Materials Constructed with Kevlar Fabric and a Novel Shear Thickening Fluid

Enhancement of silk fabric knife-stabbing resistance for soft body armor

The experimental research on the stab resistance of warp-knitted spacer fabric

Effect of abrasion level on surface handling and thermal conductivity of blended suit fabrics

Stab and puncture resistance of silica-coated Kevlar–wool and Kevlar–wool–nylon fabrics in quasistatic conditions

Effects of STF and Fiber Characteristics on Quasi-Static Stab Resistant Properties of Shear Thickening Fluid (STF)-Impregnated UHMWPE/Kevlar Composite Fabrics

Structural Design and Performance of Cut-Resistant Fabrics with Concave-Convex Arrays

Properties of Kevlar Fabric Composites Reinforced by STF Composed of Monodisperse Polystyrene Microspheres

Cut-resistance of elastic high-performance composite yarn

Experimental analysis of the impact protection properties for Kevlar® fabrics under different orientation layers and non-Newtonian fluid compositions

Intralayer Interfacial Sliding Effect on the Anti-Impact Performance of STF/Kevlar Composite Fabric

Stab-resistant Properties of Multi-Axial Warp Knitted Fabric

Preparation and the influence of twist factor on cut resistance performance of Kevlar short fiber covered yarn fabric

Cut resistant characteristic of weft plain-knitted structure for protective clothing

Consideration of Yarn Anisotropy in the Investigation of the Puncture Resistance of Fibrous Materials

Optimization the Stab Resistance and Flexibility of Ultra-High Molecular Weight Polyethylene Knitted Structure Fabric with Response Surface Method

The Behaviour of Stratified Fabrics of Aramid Fibres under Stabbing Conditions