Abstract:The absorption efficiencies of CO2 in hollow-fiber membrane contactors using an ethanolamine (MEA) solvent under both concurrent- and countercurrent-flow operations were investigated theoretically and experimentally. Two-dimensional mathematical modeling was developed by Happel's free surface model, and the resultant partial differential equations were solved analytically using the separated variables method with the use of an orthogonal expansion technique. A simplified expression of Sherwood number variations was reported by employing the relevant operations conditions and expressed in terms of the computed eigenvalues for predicting concentration distribution and absorption efficiency. It is emphasized that, in comparing various fiber packing configurations, both theoretical predictions and experimental results should be compared to find the absorption flux increment accomplished by the CO2/N2 stream passing through the fiber cells under the same mass flow rate. The value of the present mathematical treatment is evident to propose a simplified expression of the averaged Sherwood number variations, and provides the predictions of the absorption flux, absorption efficiency, average Sherwood number with the absorbent Graetz number, inlet CO2 concentration, and absorbent flow rates as parameters. The availability of such concise expressions, as developed directly from the analytical formulations, is the value of the present study. The experiments of the CO2 absorption using MEA with alumina (Al2O3) hollow fiber membranes are also set up to confirm the accuracy of the theoretical predictions. The accuracy derivations between the experimental results and theoretical predictions for concurrent- and countercurrent-flow operations are 4.10×10−2≤E≤1.50×10−2 and 1.40×10−2≤E≤9.0×10−1, respectively. The operations of the hollow-fiber membrane contactor implementing N = 7 fiber cells and N = 19 fiber cells offer an inexpensive method of improving absorption efficiency by increasing fiber numbers with consideration of device performance.

CO_2 Absorption Characteristics and Mass Transfer Performance in Grafted PVDF Hollow Fiber Membrane Contactor

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

CO2 Facilitated Transport Through an Acrylamide and Maleic Anhydride Copolymer Membrane

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Study on Co2 Removal in Air by Hydrogel Membranes

Effect of Non-Solvent Additive Concentration on CO2 Absorption Performance of Polyvinylidenefluoride Hollow Fiber Membrane Contactor

Absorption of CO2 Form Natural Gas via Gas-liquid PVDF Hollow Fiber Membrane Contactor and Potassium Glycinate as Solvent

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Preparation of a novel dual-layer polyvinylidene fluoride hollow fiber composite membrane with hydrophobic inner layer for carbon dioxide absorption in a membrane contactor

Fabrication and Characterization of Poly(vinylidene Fluoride)–polytetrafluoroethylene Composite Membrane for CO2 Absorption in Gas–liquid Contacting Process

Hollow Fiber Contained Hydrogel-Ca Membrane Contactor for Carbon Dioxide Removal from the Enclosed Spaces

An Experimental Study PVDF and PSF Hollow Fiber Membranes for Chemical Absorption Carbon Dioxide

Experimental Study on the Separation of CO2 from Flue Gas Using Hollow Fiber Membrane Contactors Without Wetting

Fabrication of a super hydrophobic polyvinylidene fluoride–hexadecyltrimethoxysilane hybrid membrane for carbon dioxide absorption in a membrane contactor

Two-Dimensional Conjugated Mass Transfer of Carbon Dioxide Absorption in a Hollow-Fiber Gas-Liquid Membrane Contactor

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

Microporous polypropylene hollow fiber membranes contactor for the separation and fixation of carbon dioxide from simulative flue gas

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Long-term stability of PVDF-SiO2-HDTMS composite hollow fiber membrane for carbon dioxide absorption in gas–liquid contacting process

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Fabrication of a superhydrophobic mixed matrix PVDF-SiO2-HDTMS hollow fiber membrane for membrane contact carbon dioxide absorption