Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Fabrication and Performance Optimization of Photoelectrodes for Dye-sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

Strategy to Improve the Performance of Dye-sensitized Solar Cells Based on TiO 2 Films Prepared by Room Temperature Cold Spray

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

Enhanced performance of dye-sensitized solar cell via surface modification of mesoporous TiO2 photoanode with electrodeposited thin TiO2 layer

Influence of Nanoporous TiO_2 Films on the Performance of Dye-Sensitized Solar Cells

Microstructure Design of Nanoporous TiO2Photoelectrodes for Dye-Sensitized Solar Cell Modules

Photovoltaic Performance Improvement of Dye-Sensitized Solar Cells Through Introducing In-doped TiO2 Film at Conducting Glass and Mesoporous TiO2 Interface As an Efficient Compact Layer

Efficiency Improvement in Dye-Sensitized Solar Cells by Modify Titanium Dioxide Formation on Supercritical Carbon Dioxide Fluid Synchronous Dyeing

Enhanced Photovoltaic Properties of Dye-Sensitized Solar Cell Based on Ultrathin 2D TiO2 Nanostructures

Light absorption enhancement in dye-sensitized solar cells using thin nanostructured photoelectrodes

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Fabrication of TiO2 photoelectrodes doped with copper and zirconium to improve electron generation and flow in dye-sensitized solar cell

Study of How Photoelectrodes Modified by TiO2/Ag Nanofibers in Various Structures Enhance the Efficiency of Dye-Sensitized Solar Cells under Low Illumination

Optimization of Photoelectrode Introduced to Dye-Sensitized Solar Cells by Anodic Oxidative Hydrolysis

Fabrication of Enhanced Electron Transport Layer by Laser Scanning Technology for Dye-sensitized Solar Cells

Enhanced Photovoltaic Performance of Dye-Sensitized Solar Cells with TiO 2 Micro/nano-Structures As Light Scattering Layer