Abstract:Objective: A novel X-ray field produced by an ultrathin conical target is described in the literature. However, the optimal design for an associated collimator remains ambiguous. Current optimization methods using Monte Carlo calculations restrict the efficiency and robustness of the design process. A more generic optimization method that reduces parameter constraints while minimizing computational load is necessary. A numerical method for optimizing the longitudinal collimator hole geometry for a cylindrically-symmetrical X-ray tube is demonstrated and compared to Monte Carlo calculations. Approach: The X-ray phase space was modelled as a four-dimensional histogram differential in photon initial position, final position, and photon energy. The collimator was modelled as a stack of thin washers with varying inner radii. Simulated annealing was employed to optimize this set of inner radii according to various objective functions calculated on the photon flux at a specified plane. Main results: The analytical transport model used for optimization was validated against Monte Carlo calculations using Geant4 via its wrapper, TOPAS. Optimized collimators and the resulting photon flux profiles are presented for three focal spot sizes and five positions of the source. Optimizations were performed with multiple objective functions based on various weightings of precision, intensity, and field flatness metrics. Finally, a select set of these optimized collimators, plus a parallel-hole collimator for comparison, were modelled in TOPAS. The evolution of the radiation field profiles are presented for various positions of the source for each collimator. Significance: This novel optimization strategy proved consistent and robust across the range of X-ray tube settings regardless of the optimization starting point. Common collimator geometries were re-derived using this algorithm while simultaneously optimizing geometry-specific parameters. The advantages of this strategy over iterative Monte Carlo-based techniques, including computational efficiency, radiation source-specificity, and solution flexibility, make it a desirable optimization method for complex irradiation geometries.

Optimization and Thermal Analysis of Collinear Load on LINAC

Electromagnetic analyses and optimization for slit configuration of ITER blanket shield block

Analysis and Optimization of Cooling Channels in ITER Blanket Module

Effects Evaluation of Fin Layouts on Charging Performance of Shell-and-tube LTES under Fluctuating Heat Sources

Numerical optimization of longitudinal collimator geometry for novel x-ray field

RF thermal and new cold part design studies on TTF-III input coupler for Project-X

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

Proposal and design of 81.25 MHz heavy ion drift tube linacs for BISOL

Design and Optimization of Compact Linear Collider Main Linac Accelerating Structure

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Physical Design of A 10 Mev Linac for Polymer Radiation Processing

Multi-physics Analysis and Experiment of a CW Four-Rod RFQ

Study on transient beam loading compensation for China ADS proton linac injector II

Optimization and Measurement for an Electron Side-Coupled Linac with Longitudinally Off-Axis Coupling Cavities

Multi-physics Field Coupling Analysis of RFQ Cavity for SSC-LINAC

Monte carlo simulation of radiation field optimization for medical linac

Numerical Optimization of Electromagnet Current Distribution in Superconducting Linear Acceleration System

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility

Numerical analysis and process optimization of electron beam melting for superalloys

RF Electromagnetic Design and Field Tuning Study of the Coupled Ladder RFQ-IH DTL Structure