Abstract:In this study, through reasonable composition design, three elements of Zn, Mn and Ca, which are harmless to human body, were selected for alloying magnesium. The effects of ECAP treatment on the microstructure and corrosion properties of Mg-4Zn-1Mn-0Ca, Mg-4Zn-1Mn-0.2Ca and Mg-4Zn-0Mn-0.2Ca alloys were studied. The corrosion mechanism of Mg-Zn-Mn-Ca alloys with different components in Simulated. Body fluid (SBF) was analyzed by weight loss method and electrochemical test. The grains and the second phase were refined by Equal Angular Channel Pressing (ECAP). It was found that after 8 ECAP deformations, the microstructure of the alloy was refined and more uniform than that of the extruded alloy. The corrosion resistance of the Mg-Zn-Mn-Ca alloy after ECAP deformation in simulated body fluids was studied by electrochemical testing techniques, immersion experiments and observation of the microstructure and morphology of corrosion products. The relationship between microstructure characteristics, the behavior of the magnesium metal matrix and the properties of corrosion products was revealed. The results show that the microstructure of the alloy is refined and the corrosion resistance is improved with the increase in extrusion passes in the SBF solution. The corrosion resistance of magnesium alloy after 8 ECAP deformation is the best, showing small Icorr and large Rt. With the extension of the soaking time, the surface of the alloy will form a passivation film, which will protect the matrix and avoid further corrosion of the alloy. It is found that in SBF, the corrosion of the alloy surface is mainly pitting, which indicates that Ca2+, HCO3- and HPO42(-) in SBF can reduce the corrosion rate of magnesium alloy.

Effects of Cu and Mg on Corrosion Resistance of Al-7Si Cast Alloy

Influence of β-Mg 17 Al 12 and Al-Mn intermetallic compounds on the corrosion behaviour of cast and solution treated Mg-Al-Zn-Mn alloys

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

Corrosion evaluation of Al-Cu-Mn-Zr cast alloys in 3.5% NaCl solution

Effect of CaCl2 and NaHCO3 in Physiological Saline Solution on the Corrosion Behavior of an As-Extruded Mg–Zn–Y–Nd alloy

Effect of Alloying Mg on Corrosion Resistance of Cu at High Temperature

Microstructure and Corrosion Behavior of the As-cast Mg-xAl (x=9%, 12%, 15%) Alloys

Corrosion behavior of magnesium and its alloy in NaCl solution

Effects of Al addition on corrosion behavior and mechanical property of high-strength and high-elasticity Cu-20Ni-20Mn-0.3Nb-0.3Cr-0.3Zr alloy

Effect of Solid-Solution Treatment on Corrosion and Electrochemical Behaviors of Mg-15Y Alloy in 3.5 Wt.% NaCl Solution

In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment

Comparison on corrosion resistance and surface film of pure Mg and Mg−14Li alloy

Effect of Al Element on the Microstructure and Properties of Cu-Ni-Fe-Mn Alloys

Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy

Effect of micro-alloying element La on corrosion behavior of Al-Mg-Si alloys

Effect of Mg on the Corrosion Resistance of Hot-Dip Zn-Cu-Ti Alloy

Effect of Al Addition and Heat Treatment on the Microstructures and Corrosion Resistance of Mg-Cu Alloys

Effect of Trace Zn on the Mechanical Properties and Corrosion Behavior of Al-Mg-Si Alloys with High Cu

Corrosion Behavior of Mg-Zn-Y-Zr Alloys in Nacl Solution

Role of alloyed Al on the microstructure and corrosion behavior of as-cast dilute Mg-2Zn- x Al-0.5Ca alloys