Abstract:In this work, an electrooxidation (EO) of amoxicillin (AMX) wastewater treatment was performed based on a three-stage electrochemical flow-through mode to address the emerging issue of antibiotic contaminants in water matrices. The removal of 96.1 % for AMX was obtained and followed pseudo-first-order reaction kinetics (kobs) with a value of 0.1197 min−1 and electric energy per order (EE/O) of 20.47 kWh/m3 at a current density of 8.49 mA/cm2. Compared with single-stage EFTM, the three-stage EFTM had an outstanding performance with a slight difference for AMX degradation and a significantly reduced EE/O. However, a marked difference was achieved in mineralization efficiency. It obtained TOC removal of 81.3 %, which was improved about 1.52 times that of the single-stage EFTM (53.5 %) when an analogous current was applied (500 mA) and reduced 1.77 times concerning the specific energy consumption (EC) of TOC mass removed (3.337 kWh/g TOC). It was moreover astonished that the EC per unit TOC mass removed decreased by increasing an initial quantity of TOC mass. More interestingly, the electrocatalytic of porous Ti–ENTA/SnO2–Sb benefited the production of OH in a three-stage EFTM at high current, which contributes a vital role in removing organic pollutants. Furthermore, scavenging experiments revealed that SO4− radical plays a dominant role as the main radical species compared to OH radical in indirect electrooxidation of AMX. As such, the results of this study indicate that both hydroxyl and sulfate radicals-mediated oxidation. Furthermore, the feasibility and stability of the porous Ti-ENTA/SnO2-Sb anode were evidenced by the practical application potential of a multi-stage flow-through system through its significant and stable AMX removal efficiency of at least 94.2 % during the long-term EO test of 12 h. Hence, the three-stage flow-through system furnishes the superiority with insight and application into the effective treatment of antibiotic wastewater.

EDTA and Electricity Synergetic Catalyzed Fe(3+)/H2O2 Process for Amoxicillin Oxidation.

Edta And Electricity Synergetic Catalyzed Fe3+/H2o2 Process For Amoxicillin Oxidation

EDTA and electricity synergetic catalyzed Fe<sup>3 + </sup>/H<sub>2</sub>O<sub>2</sub>process for amoxicillin oxidation

Characteristics of Amoxicillin Wastewater Degradation by Electro-Fenton Process

Efficient Degradation of Amoxicillin by Scaled-Up Electro-Fenton Process: Attenuation of Toxicity and Decomposition Mechanism

Effective degradation of amoxicillin by multi-stage flow-through electrochemical system using porous electrodes

Pretreatment by Fenton Oxidation of an Amoxillin Wastewater

Fabrication of multi-walled carbon nanotubes and carbon black co-modified graphite felt cathode for amoxicillin removal by electrochemical advanced oxidation processes under mild pH condition

Electrochemical removal of amoxicillin using a Cu doped PbO2 electrode: Electrode characterization, operational parameters optimization and degradation mechanism

Enhanced amoxicillin treatment using the electro-peroxone process: key factors and degradation mechanism

Treatment of Biotreated Amoxicillin Wastewater by Fenton Reagent Oxidation-SBR Process

Feasibility Study of Treatment of Amoxillin Wastewater with a Combination of Extraction, Fenton Oxidation and Reverse Osmosis

Advanced treatment of secondary effluent of antibiotic wastewater using Fenton oxidation method

Degradation of COD in antibiotic wastewater by a combination process of electrochemistry, hydroxyl-functionalized ball-milled zero-valent iron/Fe3O4 and Oxone

Application of Electro-Activated Persulfate Oxidation Enhanced with an Ultraviolet Process in a Multi-Stage Flow-Through Filtration System for Antibiotics Abatement

Study of The Performance of A Cylindrical Flow-Through Electro-Fenton Reactor Using Different Arrangements of Carbon Felt Electrodes: Degradation of Amoxicillin In Aqueous Solution

The degradation of antibiotic amoxicillin in the Fenton-activated sludge combined system

Application of photo-electro oxidation process for amoxicillin removal from aqueous solution: Modeling and toxicity evaluation

EDTA-modified Zero-Valent Iron Activated Peracetic Acid for Sulfamethazine Removal: Performance and Mechanism

A Three-Dimensional Gas Diffusion Electrode Without External Aeration for Producing H2O2 and Eliminating Amoxicillin Using Electro-Fenton Process

Using Peroxymonosulfate-Ozone Advanced Oxidation For The Treated Wastewater Disinfection and Amoxicillin Micro-Pollutant Removal Simultaneously