A KIND OF INTELLIGENT INTERNAL MODEL CONTROL

Jie Chen,Ceng Jiang,Lixin Xu

2008-01-01

Abstract:In this paper, a kind of intelligent internal model control (IIMC) Algorithm was proposed. The simulation results show that the IIMC algorithm has good performance at model mismatching within some range and is superior to ordinary internal model control in dynamic performance. Keywords: Internal model, Intelligent, Identification, Simulation

What problem does this paper attempt to address?

Research of a Kind of Intelligent Internal Model Control

Ling Zhou,Jie Chen,Ceng Jiang,Lixin Xu

DOI: https://doi.org/10.1109/csse.2008.1644

2008-01-01

Abstract:In this paper, a kind of intelligent internal model control (IIMC) algorithm was proposed. The simulation results show that the IIMC algorithm has good performance at model mismatching within some range and is superior to ordinary IMC in dynamic performance.
Multi-loop Adaptive Internal Model Control Based on a Dynamic Partial Least Squares Model

Zhao,Bin Hu,Jun Liang

DOI: https://doi.org/10.1631/jzus.a1000316

2011-01-01

Journal of Zhejiang University SCIENCE A

Abstract:A multi-loop adaptive internal model control (IMC) strategy based on a dynamic partial least squares (PLS) framework is proposed to account for plant model errors caused by slow aging, drift in operational conditions, or environmental changes. Since PLS decomposition structure enables multi-loop controller design within latent spaces, a multivariable adaptive control scheme can be converted easily into several independent univariable control loops in the PLS space. In each latent subspace, once the model error exceeds a specific threshold, online adaptation rules are implemented separately to correct the plant model mismatch via a recursive least squares (RLS) algorithm. Because the IMC extracts the inverse of the minimum part of the internal model as its structure, the IMC controller is self-tuned by explicitly updating the parameters, which are parts of the internal model. Both parameter convergence and system stability are briefly analyzed, and proved to be effective. Finally, the proposed control scheme is tested and evaluated using a widely-used benchmark of a multi-input multi-output (MIMO) system with pure delay.
Adaptive Internal Model Controller Design Using Dynamic Partial Least Squares Decoupling Structure

Qinghua Chi,Zhao Zhao,Xin Jin,Jun Liang

2014-01-01

Abstract:A new adaptive internal model control (IMC) scheme based on a novel adaptive model is proposed to account for the process uncertainties in MIMO system. A dynamic partial least squares (PLS) decoupling structure which integrated tradition PLS model and auto-regressive exogenous (ARX) is introduced to model the dynamic process. In the presence of uncertainties, adaptive mechanisms including recursive PLS (RPLS) and recursive least squares (RLS) are used to update the model on-line. Accordingly, the adaptive IMC is designed based on the updated model. To demonstrate the modeling effect of the dynamic PLS decoupling structure and the control performance of the adaptive IMC scheme under uncertainties, a simulation example is presented.
Internal Model Control of Internal Thermally Coupled Air Separation Column

丛琳,刘兴高

DOI: https://doi.org/10.3969/j.issn.1671-7147.2010.04.009

2010-01-01

Abstract:Internal Thermally Coupled Air Separation Column(ITCASC) has great potential for energy saving in air separation,which is a breakthrough in the energy saving technique of internal thermally coupled distillation.However,the control of the system is very difficult due to the nonlinearity,complex dynamics and interactive nature of the process.A novel reduced-order model for ITCASC is therefore proposed,and an internal model controller is further designed based on the above proposed reduced-order model.The research results demonstrate that the IMC controller can deal with the nonlinearity and the interactive nature,which is more effective for ITCASC than PID controllers.
Adaptive Internal Model Control of a High‐Purity Heat‐Integrated Air Separation Column

Yao Fu,Xinggao Liu

DOI: https://doi.org/10.1002/ceat.201400393

IF: 2.2148

2015-01-01

Chemical Engineering & Technology

Abstract:An internal model control scheme based on a second-order internal model (SI-IMC) is proposed for the heat-integrated air separation column (HIASC). An adaptive internal model control (ASI-IMC) scheme is further presented to make the model more accurate. The IMC scheme based on the first-order model (F-IMC) and the multi-loop PID (M-PID) scheme are also explored as the comparison basis of ASI-IMC and SI-IMC schemes. Comparative researches among these four control schemes are carried out in detail. The results indicate that ASI-IMC presents the best performances among the four control schemes in both servo control and regulatory control, which proves the improvement of ASI-IMC over the SI-IMC and the superiority of ASI-IMC for the high-purity HIASC.
Technical Communique: Optimal closed-loop identification test design for internal model control

Yucai Zhu,Paul P. J. Van Den Bosch

DOI: https://doi.org/10.1016/S0005-1098(00)00034-0

2000-01-01

Abstract:AbstractIn this work, optimal closed-loop test design for control is studied. Simple design formulas are derived based on the asymptotic theory of Ljung. The control scheme used is internal model control (IMC) and the design constraint is the power of the process output or that of the reference signal. The test signal is applied at the setpoint. The results give clear guidelines for closed-loop identification applications.
Speed Control of PMLSM Based on Internal Model Control

Lu Huacai,Xu Yuetong,Chen Zichen

DOI: https://doi.org/10.3321/j.issn:1000-6753.2008.05.005

2008-01-01

Abstract:According to the internal model control (IMC) theory, non-parameter model of the permanent magnet linear synchronous motor (PMLSM) was made, then a novel IMC controller of PMLSM was designed. The optimal parameters of IMC was adjusted and decided by theory analysis and simulation. The simulating and experimental results show that the proposed controller provides perfect dynamic response performance in both reference tracking and disturbance rejection,moreover, it is robust to external disturbance.
SVM based internal model control for nonlinear systems

Weimin Zhong,Daoying Pi,Youxian Sun,Chi Xu,Sizhen Chu

DOI: https://doi.org/10.1007/11760023_135

2006-01-01

Abstract:In this paper, a design procedure of support vector machine (SVM) with RBF kernel function based internal model control (IMC) strategy for stable nonlinear systems with input-output form is proposed. The control scheme consists of two controllers: a SVM based controller which fulfils the direct inverse model control and a traditional controller which fulfils the close-loop control. And so the scheme can deal with the errors between the process and the SVM based internal model generated by model mismatch and additional disturbance. Simulations are given to illustrate the proposed design procedure and the properties of the SVM based internal model control scheme for unknown nonlinear systems with time delay.
A Scheme of Model Invalidation Assessment for Multivariable Dynamic Matrix Controllers

Tengwei Liang,Jun Zhao,Zuhua Xu,Jixin Qian

DOI: https://doi.org/10.1109/FSKD.2008.337

2008-01-01

Abstract:Model mismatch is an inherent problem in model predictive control (MPC), but the performance of MPC will descend and even be invalid when the model mismatch extent exceeds a certain level. This paper introduces a mechanism for assessing model invalidation for dynamic matrix control (DMC) in a probabilistic framework. The relationship between model predictive error and disturbance series, which can determine model-plant mismatch (MPM), is presented using internal model control (IMC) structure of DMC. Then the difference between these two time series is used to assess model invalidation through statistical inference method. The model is invalid if the calculated statistics is larger than a threshold with a given significant level. Numerical examples demonstrate the effectiveness of proposed method.
Multi-loop Internal Model Controller Design Based on a Dynamic PLS Framework

Bin HU,Pingyou ZHENG,Jun LIANG,胡斌,郑平友,梁军

DOI: https://doi.org/10.1016/S1004-9541(08)60353-5

IF: 3.8

2010-01-01

Chinese Journal of Chemical Engineering

Abstract:In this paper, a multi-loop internal model control (IMC) scheme in conjunction with feed-forward strategy based on the dynamic partial least squares (DyPLS) framework is proposed. Unlike the traditional methods to decouple multi-input multi-output (MIMO) systems, the DyPLS framework automatically decomposes the MIMO process into a multi-loop system in the PLS subspace in the modeling stage. The dynamic filters with identical structure are used to build the dynamic PLS model, which retains the orthogonality among the latent variables. To address the model mismatch problem, an off-line least squares method is applied to obtain a set of optimal filter parameters in each latent space. Without losing the merits of model-based control, a simple and easy-tuned IMC structure is readily carried over to the dynamic PLS control framework. In addition, by projecting the measurable disturbance into the latent subspace, a multi-loop feed-forward control is yielded to achieve better performance for disturbance rejection. Simulation results of a distillation column are used to further demonstrate this new strategy outperforms conventional control schemes in servo behavior and disturbance rejection.
ILC strategy for progress improvement of economic performance in industrial model predictive control systems

xing cai,pei sun,junghui chen,lei xie

DOI: https://doi.org/10.1016/j.jprocont.2014.09.010

IF: 3.951

2014-01-01

Journal of Process Control

Abstract:•Economic performance design and control performance design is integrated for MPC.•Without LQG curve, ILC design can enhance economic control performance.•LP problems and ILC design are used to optimize the economic performance.•Convergence of the proposed ILC algorithm is proved.
Model Optimization of Servo System Based on Internal Model Control

Yanjun Li,Min Zhang,Yan Dong,Yang Liu,Benzhen Lin,Junhua Li

DOI: https://doi.org/10.1109/ICAIT52638.2021.9702071

2021-01-01

Abstract:In order to improve the anti-interference ability of the servo system, the Internal Model Control(IMC) is applied to the turntable servo system. The strategy takes the velocity loop simplified by using the current loop as the control object, and uses the IMC to give the desired trajectory of the system out put. By introducing the IMC scheme into the servo system, the strategy can reduce the effects of model errors and external disturbances on the system, and enhanced the system’s anti-disturbances ability. The design procedures of the proposes controller and the structure of the closed-loop control system are given. The high performance of the proposed strategy is validated by comparative simulations. The simulation results showed that the proposed strategy has strong robustness to system parameter perturbation, and has higher stability accuracy and robustness than Proportion Integration Differentiation(PID) control.
The Imc Structure of Multi-Rate Multivariable Predictive Control Systems and an Improved Algorithm

LF Zhou,JX Qian

IF: 3.8

2001-01-01

Chinese Journal of Chemical Engineering

Abstract:Multirate multivariable predictive control system with the sampling mechanism that adjusts the plant inputs only once but detects the plant outputs several times during a period is examined. The IMC structure of the system is derived, and its robust stability and zero steady state error characteristics are analyzed. A new control algorithm is developed by adding the variation of the outputs to the index performance. The simulation results show that the method is effective and has zeros steady-state error.
Internal Model Control for Electronic-hydraulic Servo System

Zhi-cheng ZHAO,Zhi-yuan LIU,Jing-gang ZHANG

DOI: https://doi.org/10.3969/j.issn.1003-501X.2008.04.001

2008-01-01

Abstract:An Internal Model Control (IMC) method is proposed for electronic-hydraulic servo system in this paper. As an advanced control algorithm, the design idea of IMC is that the object model is connected to the actual object in parallel, and the controller approaches the dynamic inverse of the model. Considering the advantages of IMC such as being insensitive to the model error, the electronic-hydraulic servo system model is simplified by reducing orders. The controller based on the simplified model has only one adjustable parameter which is directly related to system dynamic performance and robustness. Therefore, the parameter is regulated conveniently, and the randomicity and complexity of the controller regulation are avoided. Simulation and experiment results show that the IMC method overcomes parameter perturbation and improves the tracking performance and robustness of system. Furthermore, the artillery tracking error is within ±0.36 mrad.
An Internal Model Control (imc) Algorithm for Automatic Trajectory Tracking

Sumin Zhang,Weiwen Deng,Yu Wang,Bingxu Shang

DOI: https://doi.org/10.4028/www.scientific.net/amr.712-715.2296

2013-01-01

Abstract:This paper presented a trajectory tracking algorithm applied for an intelligent driving system. Both the path tracking and longitudinal speed tracking controller are based on IMC algorithm and are carried out respectively. A simulation tool is introduced in this paper and some simulation tests were conducted to verify the proposed trajectory planning algorithm. The simulation results show that the proposed trajectory tracking algorithm is valid and good for the applications of vehicle driving in complex environment.
Modified internal model control and its application in non-square processes

CHEN Pei-ying,OU Lin-lin,SUN Jing,ZHANG Wei-dong

DOI: https://doi.org/10.3321/j.issn:1001-0920.2008.05.022

2008-01-01

Abstract:A modified internal model control(IMC)method for non-square processes with multiple time delays and right-half-plant zeros is proposed.By inserting compensated terms,the unrealizable factors of the derived controller are removed.A first-order filter is added to the IMC structure to improve the robustness of the control system.Meanwhile,the sufficient and necessary conditions for holding robust stability of the system are analyzed in the presence of parameters uncertainty.The low bounds of the control parameters are derived quantitatively to guarantee the robust stability of the system.Finally,simulation results show the effectiveness of the proposed control schemes.
FUZZY INTERNAL MODEL CONTROL ON THE LOAD SYSTEM OF A THERMAL POWER UNIT AND ITS SIMULATING STUDY

李益国,沈炯,吕震中

DOI: https://doi.org/10.3321/j.issn:0258-8013.2002.04.018

2002-01-01

Abstract:Internal model control(IMC) is a new controlmethod developed in the past decade. How to acquire theinversion model of a system is its key problem. Based on the T-S fuzzy model, this paper proposes a new fuzzy internalmodel control strategy. Firstly, a fast identification algorithm is employed to get the T-S fuzzy model of a system, then theproblem to acquire the inversion fuzzy model is converted tosolve simultaneous linear equations through some trans-formation simply. GA is adopted to optimize theparameters of filters within the IMC structure. At the end, the proposed method is applied to the simulation of the load control system of a power plant. Simulation results demonstrate itsefficiency.
The Study of an Improved Gain Predictive Adaptive Internal Model Control Algorithm

ZENG Yi,GONG Liang,YANG Yu-pu

DOI: https://doi.org/10.3969/j.issn.1008-0570.2009.16.001

2009-01-01

Abstract:The dynamic performance of conventional Internal Model Control(IMC) is usually improved at the expense of robustness.To against this disadvantage, an improved gain predictive adaptive IMC algorithm is proposed.This algorithm is based on an unaltered acceleration model and predicts the object's gain according to its historical variation, then tunes the gains of model and con-troller online.Consequently, the mismatch between model and object is narrowed and the system 's robustness is enhanced.After applying it in a temperature control system with time delay, excellent control performance is achieved.
A new multi-model internal model control scheme based on neural network

Zhicheng Zhao,Zhiyuan Liu,XinYu Wen,Jianggang Zhang

DOI: https://doi.org/10.1109/WCICA.2008.4593686

2008-01-01

Abstract:Aiming at the practical plants with strong nonlinear characteristics, a new multi-model internal model control (MIMC) strategy based on Gaussian potential function networks (GPFN) is proposed in this paper. The internal model is represented by GPFN and the corresponding controller can be got directly, which simplifies the control law design and analyses greatly. Meanwhile, the way of model switch is developed based on fuzzy decision. This MIMC scheme avoids the complex calculation when adjusting the controller parameter and overcomes the switch vibration. Simulation results demonstrate that the strategy has advantage of internal model control (IMC) and multi-model control and could achieve better system performance than the conventional IMC (CIMC).
An Internal Model Control Method Based on Reversible Residual Neural Network Model Applied to Turntable Servo Systems

Cheng Xie,Ting Chen,Yang Liu,Songlin Chen

DOI: https://doi.org/10.1109/DDCLS61622.2024.10606628

2024-01-01

Abstract:To meet the special requirements of high dynamic and performance for turntable servo systems, an internal model control (IMC) method based on reversible residual neural network model is proposed in this paper. In order to improve the accuracy and modeling efficiency of the forward and inverse models in the internal model controller and ensure the correlation between these two models, a reversible residual neural network model based on the forward and inverse dynamic characteristics of turntable servo systems is proposed. Through the special design of the network structure, the forward and inverse models can be obtained by one-way training. Then, the forward and inverse models are applied to the traditional IMC algorithm framework, the IMC method based on the reversible network model is obtained, and the stability of the control system is proved. The simulation results show that the proposed IMC method has better nonlinear compensation ability, tracking effect, and dynamic performance than the traditional IMC method. In addition, the design process of the proposed internal model controller is simpler and more practical. The method described in this paper has important value and significance for the intelligent development of traditional servo control.

A KIND OF INTELLIGENT INTERNAL MODEL CONTROL

Research of a Kind of Intelligent Internal Model Control

Multi-loop Adaptive Internal Model Control Based on a Dynamic Partial Least Squares Model

Adaptive Internal Model Controller Design Using Dynamic Partial Least Squares Decoupling Structure

Internal Model Control of Internal Thermally Coupled Air Separation Column

Adaptive Internal Model Control of a High‐Purity Heat‐Integrated Air Separation Column

Technical Communique: Optimal closed-loop identification test design for internal model control

Speed Control of PMLSM Based on Internal Model Control

SVM based internal model control for nonlinear systems

A Scheme of Model Invalidation Assessment for Multivariable Dynamic Matrix Controllers

Multi-loop Internal Model Controller Design Based on a Dynamic PLS Framework

ILC strategy for progress improvement of economic performance in industrial model predictive control systems

Model Optimization of Servo System Based on Internal Model Control

The Imc Structure of Multi-Rate Multivariable Predictive Control Systems and an Improved Algorithm

Internal Model Control for Electronic-hydraulic Servo System

An Internal Model Control (imc) Algorithm for Automatic Trajectory Tracking

Modified internal model control and its application in non-square processes

FUZZY INTERNAL MODEL CONTROL ON THE LOAD SYSTEM OF A THERMAL POWER UNIT AND ITS SIMULATING STUDY

The Study of an Improved Gain Predictive Adaptive Internal Model Control Algorithm

A new multi-model internal model control scheme based on neural network

An Internal Model Control Method Based on Reversible Residual Neural Network Model Applied to Turntable Servo Systems