Abstract:Model predictive control (MPC) is an advanced control method that relies on a mathematical model containing the motor parameters in the field of Permanent Magnet Synchronous Motor (PMSM) application. However, the internal parameters of the motor and external load characteristic parameters are uncertain, and their actual values may be inconsistent with the nominal values, resulting in prediction errors, which in turn affect the performance of the control algorithm. Based on the analysis of the parameter sensitivity of the motor prediction model, traditional finite control set model predictive direct speed controller (FCS-MPDSC) predicts state parameters based on a mathematical model, and there is a problem that the parameters of the motor model are uncertain, which will lead to prediction errors. In order to improve the robustness of FCS-MPDSC parameters, this paper proposes an improved FCS-MPDSC for PMSM application, which abandons the traditional PMSM control cascade structure and has the advantages of fast speed response performance, small speed error and strong parameter robustness. In order to solve the problem of load characteristic parameter uncertainty, Luenberger observer and the Model Reference Adaptive System (MRAS) algorithm are used to estimate the variation of load characteristic parameters in this paper. Moreover, a proportional-integral (PI) control term of speed error is introduced into the cost function to achieve the zero steady state error of speed and torque, which make full use of the robustness of integral action and also a faster dynamic response of direct speed control is maintained. In this paper, the HIL experimental platform is built according to the simulation. The proposed method reduces the steady-state error of the traditional method under the parameter mismatch. When the inductance parameter and the permanent magnet flux parameters deviate two times larger than nominal values, the steady-state error of the motor speed are 0.1125% and 0.8725%, respectively, demonstrating the effectiveness of the proposed method.

Speed Control of PMLSM Based on Internal Model Control

Speed Tracking Control of PMSM Based on Direct Feedback Linearization

A PMSM Speed Servo System Based on Internal Model Control with Extended State Observer

Modified Internal Model Control of PMSM Speed-regulation System*

Precise and Robust Control of Permanent Magnet Linear Synchronous Motor in a High-Speed Feeding System

Fuzzy Adaptive Internal Model Control Schemes for PMSM Speed-Regulation System

Modeling and Simulation of Permanent Magnet Synchronous Motor Optimization Control System

Integrated Design for Permanent Magnet Synchronous Motor Servo Systems based on Dynamic Sliding Mode Control

Internal Model Control of PMSM Position Servo System: Theory and Experimental Results

Secant method-based internal model control system for permanent magnet linear synchronous motor

A New Sensorless Control Strategy of the PMLSM Based on an Ultra-Local Model Velocity Control System

Design of Improved Internal Model Control for Current Loop of Permanent Magnet Synchronous Motor

Integrated Predictive Control of PMLSM Current and Velocity Based on ST-SMO

Robust Control of Permanent Magnet Synchronous Motor Based on SMILC

Low-speed performance research for permanent magnet synchronous linear motor based on nonparametric model learning adaptive control

Sliding Mode Speed Control for PMSM Based on Model Predictive Current

A Speed Disturbance Control Method Based on Sliding Mode Control of Permanent Magnet Synchronous Linear Motor

An Internal Model Approach for Speed Tracking Control of PMSM Driven Electric Vehicle

Nonsingular Fast Terminal Sliding Mode Control Strategy for PMLSM Based on Disturbance Compensation

Speed Tracking Control of Permanent Magnet Synchronous Motor by a Novel Two-step Internal Model Control Approach

A finite control set model predictive direct speed controller for PMSM application with improved parameter robustness