Abstract:Latent heat storage systems play an essential role in energy applications by improving the utilization efficiency and increasing the system flexibility. In this study, a pilot-scale medium-to-high-temperature latent heat storage system was constructed, and experimental heat storage tests were conducted. The temperature distribution of the experimental system was verified through numerical simulations that coupled the physical fields of the fluids, heat transfer, and solid mechanics. Also, the changing dynamic behavior of the stresses in the heat storage process related to the experiments was carefully studied. It was discovered that there were stress concentrations where the heat exchanger tubes touched the casing, with the highest level being over 370.00 MPa. Experimental stress rupture of the shell occurred in the horizontally arranged heat-exchange tubes, whereas vertically arranged tubes significantly reduced the stress at the contact surfaces by 24.70 % according to simulations. Simulation studies on various influencing factors indicated a more significant impact of spiral fins on the system stress. Increasing the preheating temperature by 30 degrees C reduced stress on the front surface by 109.67 MPa; each 20 degrees C increase in heating temperature raised the stress by 223.30 MPa, whereas the effect of heat transfer fluid speed was minimal. Regarding the heat-exchange tube dimensions, increasing the height increased the tube body stress by 25.74 MPa, whereas increasing the thickness reduced the stress by 24.20 %. This study comprehensively analyzed the stress dynamics and mitigation strategies of the high-temperature latent heat storage system under various conditions, emphasizing the importance of heat-exchange tube orientation, temperature control, and fin design for optimizing system performance and durability.

EXPERIMENTAL INVESTIGATIONS ON THE CHARACTERISTICS AND AUGMENTATION OF MELTING PROCESSES OF STEARIC ACID IN AN ANNULUS

Effect of novel concentric annular fins on the melting and solidification process of stearic acid in thermal energy storage devices

Parametric Study on Melting Process of a Shell-and-tube Latent Thermal Energy Storage under Fluctuating Thermal Conditions

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Investigative Study of Solidification and Melting of Stearic Acid in Triplex Pipe with Perforated Fin Surface

Design optimization of a novel annular fin on a latent heat storage device for building heating

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Thermal energy storage system using stearic acid as a phase change material

Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube

Preparation and Characterization of Stearic Acid/Expanded Graphite Composites As Thermal Energy Storage Materials

Investigation on Melting Process of Finned Thermal Energy Storage with Rotational Actuation

Preparation and characteristics of microencapsulated stearic acid as composite thermal energy storage material in buildings

Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit

Study on melting process of latent heat energy storage system by nano-enhanced phase change material under rotation condition

An Industrial Experiemental Study on Heat Discharge Performance of Cylindrical Phase-change Thermal Energy Storage

Numerical Simulation of Transient Thermal Stresses in Medium- and High-Temperature Latent Heat Storage Systems with Different Fins: Incorporation of Experimental Stress Cracking

Experimental research and numerical simulation of the thermal performance of a tube-fin cold energy storage unit using water/modified expanded graphite as the phase change material

Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit

Experimental Investigation on Heat Transfer Enhancement of Phase Change Materials by Fractal Fins

Preparation and characterization of phase change material emulsions and their applications in liquid cooling systems for wind turbines

Numerical analysis on heat transfer and melting characteristics of a solid-liquid phase change process in a rectangular cavity inserted with bifurcated fractal fins