Abstract:2.25Cr-1Mo-0.25V steel is the main material of hydrogenation reactor due to its good high temperature properties and hydrogen embrittlement resistance. As we all know, there is a great performance gap between virgin material and actual product. Nevertheless, current design methods cannot evaluate the impact of manufacturing. In engineering practice, tensile testing is widely implemented on online surveillance samples or experimentally simulated samples to acquire the actual material characteristics. However, sampling from service hydrogenation reactor, as well as simulating actual manufacturing process, is time-consuming, labor-intensive, and difficult. To systematically analyze the effect of fabrication on 2. 25Cr-1Mo-0. 25V steel, a prediction method that can consider manufacturing residual effects needs to be proposed. Nowadays, many data-driven methods, such as back propagation neural network (BPNN), support vector machine (SVM) and random forest (RF), are employed in predicting material behavior during hot forming, whereas they are scarcely applied on 2.25Cr-1Mo-0.25V steel. In this work, the mentioned three machine learning procedures were constructed to simulate the behavior of actually manufactured 2. 25Cr-1Mo-0.25V steel in uniaxial tensile test. Firstly, tensile samples were extracted from different locations of an actually manufactured hydrogenation reactor, and stretched at 454 degrees C and 482 degrees C. Subsequently, BPNN, SVM and RF models were developed on the obtained tensile curves, respectively. Their inputs were manufacturing parameter, sampling location, service temperature and tensile strain, whereas their output was tensile stress. Finally, the predictability of models was evaluated by test set data which were not involved in model training process. The results show that the predictions of BPNN, SVM and RF all agree well with experimental data. BPNN exhibits lowest prediction error and highest generalization power, SVM is somewhere in between, while RF is the worst. This work will contribute to the application of data-driven methods in material property prediction of 2. 25Cr-1Mo-0.25V steel.

Predicting SCC Behavior of Austenitic Stainless Steels in High Temperature Water by Artificial Neural Network

Ultra-low Cycle Fatigue Life Prediction of Stainless Steel Based on Transfer Learning Guided Artificial Neural Network

Prediction and Analysis of Tensile Properties of Austenitic Stainless Steel Using Artificial Neural Network

Conditional Generative Adversarial Network-Based Predictive Method for Crack Initiation in a Dual-Phase Austenite Stainless Weld

Predicting Solidification Cracking Susceptibility of Stainless Steels Using Machine Learning

An ANN Hardness Prediction Tool Based on a Finite Element Implementation of a Thermal–Metallurgical Model for Mild Steel Produced by WAAM

APPLICATION OF DIFFERENT DATA-DRIVEN METHODS IN MATERIAL PERFORMANCE PREDICTION OF 2.25CR-1MO-0.25V STEEL AFTER FORMING AND TEMPERING

Modelling and Analysis of the Corrosion Characteristics of Ferritic-Martensitic Steels in Supercritical Water

Application of machine learning models to investigate the performance of stainless steel type 904 with agricultural waste

Artificial Neural Network Prediction of Retained Austenite Content and Impact Toughness of High-Vanadium High-Speed Steel (HVHSS)

A deep learning-based method for predicting the low-cycle fatigue life of austenitic stainless steel

A cGAN-based fatigue life prediction of 316 austenitic stainless steel in high-temperature and high-pressure water environments

Machine Learning-Assisted Prediction of Stress Corrosion Crack Growth Rate in Stainless Steel

Artificial Neural Network Prediction of Heat-Treatment Hardness and Abrasive Wear Resistance of High-Vanadium High-Speed Steel (Hvhss)

A physics‐informed neural network for creep life prediction of austenitic stainless steels in air and liquid sodium

Prediction of the Property of Corrosion Resistance of A Surface Alloyed Layer by Using Artificial Neural Networks

ARTIFICIAL NEURAL NETWORK MODELING FOR ATMOSPHERIC CORROSION OF CARBON STEEL AND LOW ALLOY STEEL

Machine learning approach for predicting and understanding fatigue crack growth rate of austenitic stainless steels in high-temperature water environments

Use Of Artificial Neural Network In Predicting Mechanical Properties Of High-Speed Steel (Hss)

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Performance prediction of 304 L stainless steel based on machine learning