Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Method to Predict Resilient Modulus of Lime and Lime-Cement Stabilized Soils Used in Highway Subgrade

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Use of an Artificial Neural Network Approach for the Prediction of Resilient Modulus for Unbound Granular Material

Development of a Mechanistic-Empirical Model to Predict Equilibrium Suction for Subgrade Soil

Estimation of Resilient Modulus of Unbound Aggregates Using Performance-Related Base Course Properties

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Comparative Analysis of Using Laboratory Testing and Nondestructive Testing to Obtain Subgrade Resilient Moduli

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Research on Resilient Modulus Prediction Model and Equivalence Analysis for Polymer Reinforced Subgrade Soil under Dry-Wet Cycle

Modeling of Unsaturated Granular Materials in Flexible Pavements

A Method to Monitor and Evaluate Seasonal Variation in Resilient Modulus of Pavement Subgrade

A Combined Method to Predict the Long-Term Settlements of Roads on Soft Soil under Cyclic Traffic Loadings

Prediction of resilient modulus with pre-post experimental data of undisturbed subgrade soils using machine learning algorithms

Resilient Modulus of Minnesota Road Research Project Subgrade Soil

Impact of Cementitious Materials on the Resilient Modulus and Damping Ratio of Weak Subgrade

Water Retention Behavior and Shear Strength of Artificially Cemented Granite Residual Soil Subjected to Free Drying

Predicting Flexible Pavement Distress and IRI Considering Subgrade Resilient Modulus of Fine-Grained Soils Using MEPDG

Modeling the influence of lime on the unconfined compressive strength of reconstituted graded soil using advanced machine learning approaches for subgrade and liner applications

Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Experimental Study on Cumulative Plastic Deformation of Coarse-Grained Soil High-Grade Roadbed under Long-Term Vehicle Load

A laboratory investigation and numerical modeling on fiber reinforced lime and alkaline binder stabilized pavement subgrade soil