Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

In-situ Study of SAMs Growth Process by Cross Analysis of AFM Height and Lateral Deflection

In situ differential atomic force microscopy (AFM) measurement for ultra-thin Thiol SAM patterns by area-selective deposition technique

Investigation of Molecular Rearrangement by AFM Analysis of SAMs Annealing Process

Electrochemical Studies on Self-Assembled Monolayer (sam) Upon Exposure to Anionic Surfactants: Pfoa, Pfos, Sds and Sdbs

Molecular Dynamics Simulation of Form Measurement Process of Soft Materials Using Atomic Force Microscope

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

A Novel Atomic Force Microscope Operating in Liquid for in Situ Investigation of Electrochemical Preparation of Porous Alumina.

Study of the Raman-Afm System for Simultaneous Measurements of Raman Spectrum and Micro/Nano-Structures

Self-assembly Technology and Its Application in Electrochemical Analysis

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

Formation of Nanopatterns of a Self-Assembled Monolayer (SAM) Within a SAM of Different Molecules Using a Current Sensing Atomic Force Microscope

Nonideal electrochemical behavior of ferrocenyl-alkanethiolate SAMs maps the microenvironment of the redox unit

Mixed-SAM Surfaces Monitoring CTX-Protein Part I: Using Atomic Force Microscope Measurements

Quantifying Gauche Defects and Phase Evolution in Self-Assembled Monolayers through Sessile Drops

Investigation of coherent Fourier scatterometry as a calibration tool for determination of steep side wall angle and height of a nanostructure

AFM-Assisted Fabrication of Thiol SAM Pattern with Alternating Quantified Surface Potential

Auger Electron Spectroscopy (AES) and X-ray Photoelectron Spectroscopy (XPS) Profiling of Self Assembled Monolayer (SAM) Patterns Based on Vapor Deposition Technique

Development of a Scanning Probe Microscopy Integrated Atomic Layer Deposition System for in Situ Successive Monitoring of Thin Film Growth

Investigation of crossed SAW fields by scanning acoustic force microscopy

In situ AFM investigation of electrochemically induced surface-initiated atom-transfer radical polymerization.