Abstract:MnOx–CeO2, MnOx and CeO2 catalysts were synthesized by the sol–gel method. The structural, redox and adsorption properties of the individual and mixed oxides were investigated by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), CO temperature-programmed reduction (TPR), NO temperature-programmed oxidation (TPO), NOx temperature-programmed desorption (TPD) and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The TPO tests were performed with the soot–catalyst mixture under loose contact conditions to evaluate the catalytic activity of the oxide catalysts for soot oxidation. The MnOx–CeO2 mixed oxide catalyst presents the lowest soot oxidation temperature among the catalysts investigated in the presence of NO and O2. The synergetic effect between manganese oxide and ceria restrains the growth of oxide crystallites, increases the specific surface area and improves the low-temperature redox property. Especially, the activity of MnOx–CeO2 mixed oxides for NO oxidation and its capacity for NO2 storage in the form of surface nitrates are greatly enhanced. Not only the NO2 released from decomposition of surface nitrates but also that formed by catalytic oxidation of gaseous or adsorbed NO on the catalyst is confirmed important for soot oxidation. It is found by the in situ DRIFTS tests with the soot–catalyst mixture that the generation of surface oxygen complexes (SOCs), such as carboxylic anhydrides, lactones, quinine, ceto-enol groups, ethers and phenols, occurs at about 100°C lower temperature with exposure to NO than in the absence of NO, which is an important step for soot oxidation.

Simultaneous Catalytic Removal of Soot and NO_x over Nd_2O_3-based Complex Catalysts

Simultaneously Catalytic Removal of Nox and Soot on Rare Earth Element Oxide Loaded with Potassium and Transition Nanosized Metal Oxides

Effect of loading transition metal oxide on Nd_2O_3-based catalysts for simultaneous removing of NO_x and soot

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Simultaneous Catalytic Removal of NOχ and Diesel Soot Particulates over Ternary AB2O4 Spinel-Type Oxides

Influence of Composition of Perovskite-type Catalysts La_(1-x)A_xB_yMn_(1-y)O_3 on Simultaneous Removal of NO_x and Soot

Simultaneous catalytic removal of nitrogen oxides and diesel soot particulate over perovskite-related oxides

The Catalytic Removal of Diesel Soot and NOx on Molybdenum Trioxide-Based Composites

A Highly Efficient and Porous Catalyst for Simultaneous Removal of NOx and Diesel Soot

Simultaneous Removal of Soot and NOx over Ir-based Catalysts in the Presence of Oxygen

Effects of Adsorbed and Gaseous NOx Species on Catalytic Oxidation of Diesel Soot with MnOx–CeO2 Mixed Oxides

Simultaneous Catalytic Removal of Nox and Diesel Soot over Cu-Containing Hydrotalcite Derived Catalysts

Investigation of catalytic removal of NO_x and soot over La_(0.8)K_(0.2)Cu_(0.05)Mn_(0.95)O_3

An Exploratory Study on Simultaneous Removal of Nitrogen Oxides and Soot from Diesel Exhaust Gas: Single Component Metal Oxide Catalysts

Oxidation of model soot over MnOx and CeO2 catalysts in the presence of NO

A Novel Active Catalyst for Simultaneous Removal of NOx and Soot

Simultaneous catalytic removal of NOx and soot particulate over Co–Al mixed oxide catalysts derived from hydrotalcites

Soot Oxidation in NO Atmosphere via MnOx-CeO2 Prepared with Co-precipitation

Efficient Catalysts of K and Ce Co-Doped LaMnO 3 for NO x –Soot Simultaneous Removal and Reaction Kinetics

An Exploratory Study on Simultaneous Removal of Soot and NO over Ir/γ-Al2O3 Catalyst in the Presence of O2

Catalytic Combustion Of Soot Over The Highly Active (La0.9k0.1coo3)(X)/Nmceo(2) Catalysts