Abstract:The influences of compacting temperature ( T c ), molding pressure ( P m ), contents of lubricant ( C l ) and binder ( C b ) on the compacted density ( ρ c ) and its comprehensive soft magnetic properties for the FeSiCr soft magnetic composites (SMCs) fabricated by warm compaction were systematically studied. Appropriate increase of T c is beneficial to improve the surface lubrication effect of magnetic powders during the forming process of SMCs, thus giving rise to the increase of ρ c and the decrease of porosity fraction for the SMCs. Under this situation, the resistance of domain rotation and domain wall displacement in the SMCs during magnetization process is reduced, which is finally in favor of the improvement of SMCs's soft magnetic properties. The results of loss separation show that the P h value plays a dominant role in the variation trend of P cv value for the FeSiCr-SMCs in the test frequency range of 20–200 KHz, wherein the ratio of P h / P cv is large than 81 %. Under the optimized process parameters of T c = 110 °C, P m = 600 MPa, C l = 1.5 wt. % and C b = 2.5 wt. %, the ρ c of FeSiCr-SMCs increases by 8.14 % to 6.38 kg/m 3 , and the SMCs exhibit better comprehensive soft magnetic properties compared with those at T c = 25 °C. Hereinto, μ e increases by 19.89 % to 45.8 @ 100 kHz, P cv decreases by 26.11 % to 495.8 kW/m 3 @ f = 100 kHz, B m = 50mT, and μ e % reached 85.5 % at H = 8000 A/m. These results indicated that the warm compaction process is one of the effective ways to further promote Fe-based SMCs to meet the development requirements of high-frequency, miniaturization and high-power of electronic equipment.

Influence of Sintering Parameters on Tensile Strength of Warm Compacted Fe-2Ni-2Cu-1Mo-1C Material

Study on fatigue behavior of Fe-2Cu-2Ni-1Mo-1C powder metallurgy material

Microstructure and Mechanical Properties of Sintered and Forged Fe-2Cu-0.5C-0.11S Materials

Microstructure evolution and densification behavior of TiC/316L composite powders during cold/warm die compaction and solid-state sintering: 3D particulate scale numerical modelling and experimental validation

Microstructure evolution, phase decomposition and transition of Al0.8Co0.5Cr1.5CuFeNi HEA during high temperature sintering and mechanical properties corresponding to different microstructures

Densification and Properties Investigation of W-Mo-Cu Composites Prepared by Large Current Electric Field Sintering with Different Technologic Parameter

Numerical study on the warm compaction and solid-state sintering of TiC/316L composite powders from particulate scale

Tensile and Fatigue Characteristics of WC-20wt%Co Cemented Carbide with Sintering Methods

High density Fe-based soft magnetic composites with nice magnetic properties prepared by warm compaction

In-Situ Observations on the Fracture Mechanism of Diffusion-Alloyed Ni-Containing Powder Metal Steels and a Proposed Method for Tensile Strength Improvement

Influence of Ni-P content on microstructure and mechanical properties of Fe-x(Ni+P)-1Cu alloys

The simultaneous improvement of strength and ductility of the 93W-4.6Ni-2.4Fe prepared by additive manufacturing via optimizing sintering post-treatment

Influences of Fe Content and Cold Drawing Strain on the Microstructure and Properties of Powder Metallurgy Cu-Fe Alloy Wire

Process optimization, microstructures and mechanical/thermal properties of Cu/Invar bi-metal matrix composites fabricated by spark plasma sintering

The Influence of Ball Milling Time and Sintering Temperature on the Structural and Capabilities of FeCoCrNiMn High-Entropy Alloy

Analysis of powder metallurgy process parameters for mechanical properties of sintered Fe–Cr–Mo alloy steel

The effects of particle size distribution and sintering conditions on bending strength of sintered Ni-30%Fe alloys

Investigation of the elevated temperature tribological property and wear mechanism of Fe‐15Cu‐0.8C materials containing Mo‐coated MoS2 powders

Distinct Electrical and Mechanical Responses of a Cu-10Fe Composite Prepared by Hot-Pressed Sintering and Post Treatment

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Effects of milling time and sintering temperature on the mechanical properties of 8 wt% WC/AlCoCrFeNiTi 0.5 high entropy alloy matrix composite