Abstract:As the largest class of thermoplastic polymers, polyolefin materials have wide applications and huge annual production. The introduction of even a small amount of polar functional groups into the polyolefins could excise great control over important material properties. As the most direct and economic strategy, the coordination-insertion copolymerization of olefin with polar-functionalized monomers can enable molecular-level control of the copolymer microstructures. This represents one of the biggest challenges in this field, and is recognized as one of the last "holy grails" in this field. Late transition metal catalysts have attracted much attention in the direct copolymerization of olefin with polar monomers for the synthesis of functionalized polyolefin materials. In this field. research efforts have been devoted to palladium catalyst systems. which have been investigated thoroughly in the past few decades. In contrast, the utilization of less-expensive and earth-abundant nickel catalysts has received much less attention and is much more challenging, mainly due to the higher oxophilicity and lower polar group tolerance of the nickel metal versus palladium metal. However. the field of nickel-catalyzed copolymerization of olefins with polar monomers has witnessed rapid developments in recent years. This perspective mainly focuses on the work concerning nickel-catalyzed olefin copolymerization and summarizes the following subjects: First, we summarize the design and development of different nickel catalyst systems for the copolymerization of olefins with polar monomers, including alpha-diimine nickel, salicylaldimine nickel, various [N,O] nickel. phosphine-sulfonate nickel, phosphine-phenolate nickel and [P,C/N/P=O] nickel systems. We focus on their ligand design and catalytic properties (activity, copolymer molecular weight, comonomer incorporation, etc.) in these copolymerization reactions. In addition to the above-mentioned homogeneous nickel systems, we also summarize various heterogeneous nickel catalysts for the copolymerization of ethylene with polar monomers. Heterogeneous catalysts offer many distinct advantages, such as controlling the morphology of the copolymer product and preventing reactor fouling in the copolymerization processes. Second. we discuss some of the unique properties of the polar-functionalized polyolefin materials bearing various polar functional groups. These polar-functionalized polyolefin materials show great mechanical properties along with excellent antioxidant, self-healing, flame retardant properties, etc. Notably, there have been very few studies on the properties of functionalized polyolefins prepared by nickel catalysts. due to the inferior properties of nickel catalysts in the copolymerization reactions. Considering the recent developments of various high-performance nickel catalyst systems, more efforts should be directed towards this research field. Finally. we discuss problems and challenges in this field. and propose some promising research directions: (1) The design of new nickel catalysts with further improved catalytic properties. with special focus on expanding the scope of applicable olefins and polar monomers (ethylene. propylene, carbon monoxide, various polar monomers); (2) the development of new heterogeneous nickel catalysts and new supporting methods that could achieve product morphology control and enable continuous polymerization process by preventing reactor fouling; (3) the systematic studies on the properties of functionalized polyolefin materials with the aim of developing high-end applications. Although the research history of nickel-catalyzed copolymerization to access functionalized polyolefin materials is relatively short, we believe that it will become an important leading direction in the field of polyolefins.

Advance in Research on Copolymerization of Ethylene with Polar Monomers

Recent Advances in Nickel Catalysts with Industrial Exploitability for Copolymerization of Ethylene with Polar Monomers

Recent Advancements in Mechanistic Studies of Palladium- and Nickel-Catalyzed Ethylene Copolymerization with Polar Monomers

Polar and Functionalized Polyolefins: New Catalysts, New Modulation Strategies and New Materials

Recent Advances in Transition metal‐based Catalysts for Ethylene Copolymerization with polar comonomer

Research progress in palladium-base catalyst for copolymerization of ethylene and polar monomer

Recent development in late-metal catalysts for copolymerization of olefins with polar monomers

Highly Efficient Incorporation of Polar Comonomers in Copolymerizations with Ethylene Using Iminopyridyl Palladium System

Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers

Polymerized Metallocene Catalysts and Late Transition Metal Catalysts for Ethylene Polymerization

Direct and Tandem Routes for the Copolymerization of Ethylene with Polar Functionalized Internal Olefins.

Efficient Copolymerization of Ethylene with Polar Divinyl Monomer by Phosphino‐Phenolate Nickel Catalyst

Direct Synthesis of Functionalized High-Molecular-Weight Polyethylene by Copolymerization of Ethylene with Polar Monomers

Potentially Practical Catalytic Systems for Olefin-Polar Monomer Coordination Copolymerization

Research and Synthesis of Polyolefins Materials

A Versatile Ligand Platform for Palladium‐ and Nickel‐Catalyzed Ethylene Copolymerization with Polar Monomers

Nickel Catalysts for the Preparation of Functionalized Polyolefin Materials

Material Properties of Functional Polyethylenes from Transition-Metal-Catalyzed Ethylene–Polar Monomer Copolymerization

A “catalyst+support” Strategy for Salicylaldimine Nickel Catalyzed Ethylene Polymerization and Copolymerization with Polar Monomers

Direct Synthesis of Polar-Functionalized Linear Low-Density Polyethylene (LLDPE) and Low-Density Polyethylene (LDPE)

Recent advancements in <i>N</i>-ligated group 4 molecular catalysts for the (co)polymerization of ethylene